Knurled screws with recessed stud for loss prevention (Part Numbers - CAD Download)
- Promotional pricing ends 31/12/2024
- Volume Discount
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
653.2-M8-34-ST
Basic information
| Material | Steel |
|---|
This page is Knurled screws with recessed stud for loss prevention, part number 653.2-M8-34-ST.
You can find the detail information about specifications and dimensions on part number 653.2-M8-34-ST.
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 653.2-M4-19-ST |
| 653.2-M4-21-ST |
| 653.2-M5-18-ST |
| 653.2-M5-20-ST |
| 653.2-M8-38-ST |
| 653.2-M8-42-ST |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Length l (mm) | Thread d1 |
|---|---|---|---|---|---|---|
2.18 € | 1 | Available | 7 Days | 19 | M 4 | |
2.22 € | 1 | Available | 7 Days | 21 | M 4 | |
2.82 € | 1 | Available | 7 Days | 18 | M 5 | |
2.82 € | 1 | Available | 7 Days | 20 | M 5 | |
5.66 € | 1 | Available |
Same day
Stock | 38 | M 8 | |
5.80 € | 1 | Available | 7 Days | 42 | M 8 |
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.