Linear actuator connectors / Aluminium / GN 135.1 / 2, with 4 Stainless Steel-clamping screws DIN 912 (Part Numbers - CAD Download)
- Volume Discount
GN 135.1 Linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
135.1-B40-B50-2-SW
Basic information
| Identification No. | 2, with 4 Stainless Steel-clamping screws DIN 912 | Finish | SW, black, textured finish |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.