AC20D-40D-A (FRL), Modular Type, Filter Regulator + Mist Separator

Volume Discount

SMC modular-type F.R.L. combination unit.
[Features]
· Uses a transparent bowl guard.
· A transparent bowl guard with improved environmental resistance that provides all-round protection.
· The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
· Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
· Superior visibility: 360°
· The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
· Weight reduction: reduced by up to 90 g
· Without corrosion. The use of a resin body ensures there is no rusting.

(i)Remark

The products shown in the image are representative. CAD data is not supported for some model numbers.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Data to be displayed: 30; 45; 60

Part Number
AC20D-01-A
AC20D-01-S-A
AC20D-01CG-A
AC20D-01CM-A
AC20D-01G-1-A
AC20D-01G-A
AC20D-01G-S-A
AC20D-01G-SV1-A
AC20D-01M-A

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Connection Diameter	Case Material	Case Guard	Exhaust Structure	Flow Direction	Drain Cock	Pressure Gauge	Size of Body	Pressure Switch	Residual Pressure Relief 3-Port Connection Valve	Set Pressure	Drain Outlet	Pressure Unit
61.53 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
137.31 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
103.81 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto / Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round Pressure Gauge (With Limit Indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
106.98 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto / Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
71.85 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	[With Standard Pressure Gauge] Round Pressure Gauge (With Limit Indicator)	20	None	None	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
71.85 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	[With Standard Pressure Gauge] Round Pressure Gauge (With Limit Indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
147.61 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	[With Standard Pressure Gauge] Round Pressure Gauge (With Limit Indicator)	20	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
178.53 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	[With Standard Pressure Gauge] Round Pressure Gauge (With Limit Indicator)	20	Yes	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
75.03 €	1	26 Days	Rc1/8	[Resin] Polycarbonate Case	NA	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa

Basic information

Regulator Unit Combination	Filter Regulator + Mist Separator	Filter, Filtration Level	5μm	Mist SeparatorFiltration Range	0.3μm
Compressed Air Quality	General Dry Air	Max. Working Pressure(MPa)	1

Configure

9Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Case Material
- Resin
  - 00017
  - Nylon Case
  - Polycarbonate Case
Clear
Case Guard
- NA
- Available
Clear
Exhaust Structure
- Non-relief type
- Relief type
Clear
Flow Direction
- Standard Flow (Left to Right)
  - Flow Direction
- Reverse Flow (Right to Left)
  - Flow Direction
Clear
Drain Cock
- Manual
  - Manual
- Auto / Manual
  - N.C. (Normally Closed) at non-pressurized without drain emissions
  - N.O. (Normally Open) at non-pressurized with drain emissions
- Not Provided
  - No (Drain Guide)
Clear
Pressure Gauge
- No (No Pressure Port Plug)
- With Standard Pressure Gauge
  - Round-shaped pressure gauge (with color zone)
  - Round Pressure Gauge (With Limit Indicator)
Clear
Size of Body
20

30

40
Clear
Pressure Switch
- None
- Yes
Clear
Residual Pressure Relief 3-Port Connection Valve
- Mounting position: AW + AFM + V
- Mounting position: V + AW + AFM
- None
Clear
Set Pressure
- 0.02 to 0.2 MPa
- 0.05 to 0.7 MPa
Clear
Drain Outlet
- Drain guide 1/4
- With drain cock, barb fitting (for ø6 × ø4 nylon tube)
- With drain cock
Clear
Pressure Unit
- Name plate, bowl caution plate and pressure gauge units: psi, °F
- Unit used on nameplate and pressure gauge: MPa
Clear
Type
- AC20D
- AC30D
- AC40D
Clear
Connection Diameter
- Rc1/8
- Rc1/4
- Rc3/8
- Rc1/2
- Rc3/4
- NPT1/4
- NPT3/8
- G1/4
- G3/8
- NPT1/2
- NPT3/4
- NPT1/8
- G1/8
- G1/2
- G3/4
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

6 Days or Less

26 Days or Less
Reset

Optional Attributes

The products shown in the image are representative. CAD data is not supported for some model numbers.
The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .