SKF Temperature Probe

Basic Attributes

• Customs tariff — weight(kg)

  • 0.024
  • 0.072
  • 0.101
  • 0.174
  • 0.19
  • 0.198
  • 0.238
  • 0.241
  • 0.263
  • 0.286
  • 0.292
  • 0.326
  • 0.337
  • 0.366
  • 3.107

  Clear

• Version

  • Ambient temperature probe
  • Extension cord
  • Gas and liquid temperature probe
  • High performance probe for surface measurement
  • Holder incl. dip element
  • Insulated surface temperature probe
  • Magnetic surface probe
  • Pipe clamp temperature probe
  • Right angle surface temperature probe
  • Rotating temperature probe
  • Standard surface probe
  • Temperature probe with sharp tip
  • Very high temperature wire probe
  • Wire temperature probe

  Clear

• Response time t₉₉

  • 0.6 sec
  • 2.3 sec
  • 3.0 sec
  • 5.0 sec
  • 6.0 sec
  • 7.0 sec
  • 8.0 sec
  • 12.0 sec
  • 30.0 sec

  Clear

• Customs tariff — item number

  • 82032000
  • 84131900
  • 85149070
  • 90251920
  • 90258080

  Clear

• Application

  • For all K-type temperature probes, 10 m long.
  • For temperature measuring on pipes, cables, etc. up to diameters of 35 mm
  • For moving or rotating smooth surfaces. Four roller bearings provide suitable contact with the surfaces. Max. speed 500 m/min Dimension: D = 50 mm
  • Can be easily inserted into semi-solid materials such as foodstuffs, meat, plastic, asphalt, deep-frozen products, etc.
  • For hard surfaces at hard-to-reach measuring points such as machine components, engines, etc.
  • For hard surfaces such as roller bearings, bearing housings, machine housings, ovens, etc.
  • For hard surfaces such as roller bearings, bearing housings, machine housings, ovens, etc. with silicone encapsulated tip for heavy duty applications.
  • For hard surfaces where electrical wiring might cause short circuiting, e.g. electric motors, transformers, etc.
  • For hard, magnetic surfaces; the integral thermocouple probe and low weight minimize thermal inertia and provide an accurate temperature measurement
  • For measuring the ambient temperature
  • Holder incl. dip element for molten non-ferrous metals. Highly resistant to corrosion and oxidation at high temperatures.
  • Thin, lightweight, fiberglass insulated, very fast response time
  • Thin, lightweight, probe with ceramic insulation and very fast response times
  • With flexible probe made of stainless steel for liquids such as oils, acids, etc. and at high temperatures, e.g. open flame (not for molten aluminum)
  • With thin, extremely flexible probe with short reaction times made of stainless steel for liquids at high temperatures. Specially suitable for measuring the temperature of gases.

  Clear