Manufacturer part number: RMO300
Brand: IFM ELECTRONIC
Price: 680.40 €
Delivery time: 4 Days
Reference Temperature Torque: 20 °C
Protection: IP 65; (on the housing: IP 67; on the shaft: IP 64)
Materials: flange: aluminium; housing: stainless steel (1.4521 / 444)
Current Consumption: < 75 mA
Protection Class: III
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
RMO300
Part Number
|
---|
RMO300 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Reference Temperature Torque (°C) | Protection | Materials | Current Consumption (mA) | Protection Class | Electrical Connection - Plug | Accuracy (°) | Storage Temperature (°C) | Operating Voltage (V) | Electrical Connection | Code Signal | Reverse Polarity Protection | Transmission Standard | Short-Circuit Protection Digital Inputs | Shaft Material | Protocol | Detection System | Max. Revolution, Mechanical (U/min) | Short-Circuit Protection | Max. Relative Air Humidity (%) | Communication Interface | Inputs | Max. Starting Torque (Nm) | Resolution | Code | Max. Revolution Electrical (U/min) | Max. Power-On Delay Time (ms) | Rated Insulation Voltage (V) | IO-Link Revision | Dimensions (mm) | Required Master Port Type | Display | Transmission Type | Shaft Diameter (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
680.40 € | 1 | 4 Days | 20 | IP 65; (on the housing: IP 67; on the shaft: IP 64) | flange: aluminium; housing: stainless steel (1.4521 / 444) | < 75 | III | Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316) | 0.1 | -40-85 | 18-30 DC; (to PELV) | - | - | Yes | - | - | - | - | - | - | Yes | 98; (condensation not permissible) | IO-Link | - | 1 | 65536 steps; 32768 revolutions; 31 bit | - | 12000 | 1000 | 30 | 1.1 | Ø 58 / L = 69 | A | - | COM3 (230.4 kBaud) | 15 |
Loading...
Function Principle | Absolute | Ambient Temperature(°C) | -40-85 | Revolution Type | multiturn |
---|---|---|---|---|---|
Shaft Design | hollow shaft open to one side |
This page is Multiturn Hollow Shaft Encoder, part number RMO300.
You can find the detail information about specifications and dimensions on part number RMO300.
Configure
Basic Attributes
Electrical Connection
Code Signal
Transmission Standard
Short-Circuit Protection Digital Inputs
Shaft Material
Protocol
Detection System
Max. Revolution, Mechanical(U/min)
Inputs
Code
Display
Reference Temperature Torque(°C)
Protection
Materials
Current Consumption(mA)
Protection Class
Electrical Connection - Plug
Accuracy(°)
Storage Temperature(°C)
Operating Voltage(V)
Reverse Polarity Protection
Short-Circuit Protection
Max. Relative Air Humidity(%)
Communication Interface
Max. Starting Torque(Nm)
Resolution
Max. Revolution Electrical(U/min)
Max. Power-On Delay Time(ms)
Rated Insulation Voltage(V)
IO-Link Revision
Dimensions(mm)
Required Master Port Type
Transmission Type
Shaft Diameter(mm)
Filter by standard shipping days
Optional Attributes
Part Number |
---|
RM3008 |
RM6121 |
RM8003 |
RM8004 |
RM8007 |
RMA300 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Reference Temperature Torque (°C) | Protection | Materials | Current Consumption (mA) | Protection Class | Electrical Connection - Plug | Accuracy (°) | Storage Temperature (°C) | Operating Voltage (V) | Electrical Connection | Code Signal | Reverse Polarity Protection | Transmission Standard | Short-Circuit Protection Digital Inputs | Shaft Material | Protocol | Detection System | Max. Revolution, Mechanical (U/min) | Short-Circuit Protection | Max. Relative Air Humidity (%) | Communication Interface | Inputs | Max. Starting Torque (Nm) | Resolution | Code | Max. Revolution Electrical (U/min) | Max. Power-On Delay Time (ms) | Rated Insulation Voltage (V) | IO-Link Revision | Dimensions (mm) | Required Master Port Type | Display | Transmission Type | Shaft Diameter (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,021.09 € | 1 | 4 Days | - | IP 67; (on the housing: IP 67; on the shaft: IP 67) | Aluminium; clamping ring: brass | 100; ((24 V)) | - | - | - | - | 10-30 DC | - | - | Yes | DPV2 | - | - | - | - | 12000 | - | 98 | PROFIBUS DP | - | - | 8192 steps; 4096 revolutions; 25 bit | binary | - | - | - | - | Ø 58.5 / L = 99 | - | - | - | 12 | ||
943.47 € | 1 | 12 Days | - | IP 64 | stainless steel; flange: stainless steel | - | - | - | - | -40-85 | 4.5-30 DC | - | Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.) | Yes | - | - | 15steel (1.4104) Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110 | - | - | 12000 | - | 98 | SSI data interface | - | - | 8192 resolution; 8192 steps; 4096 revolutions; 25 bit | Gray code; (increasing code values when turned clockwise (seen on the shaft)) | - | - | - | - | - | - | Voltage supply: LED, green error: LED, red | - | 15 | ||
436.40 € | 1 | 4 Days | 25 | IP 65; (on the housing: IP 65; on the shaft: IP 64) | flange: aluminium; housing: steel powder-coated | < 30 | - | - | - | - | 4.5-30 DC | - | Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.) | - | - | - | 12steel Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110 | - | - | 12000 | - | 98 | SSI data interface | reversal of direction of rotation; reset to zero | 3 | 4096 resolution; 4096 revolutions; 24 bit | Gray code; (increasing code values when turned clockwise (seen on the shaft)) | - | - | - | - | Ø 36.5 / L = 67 | - | - | - | 12 | ||
388.18 € | 1 | 4 Days | 25 | IP 65; (on the housing: IP 65; on the shaft: IP 64) | flange: aluminium; housing cap: steel powder-coated | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.25 | - | 9-30 DC; ("supply class 2" to cULus) | Connector: 1 x M12, axial | - | Yes | - | - | 12steel Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110 | CANopen | - | 6000 | Yes | 98 | CAN | - | 3 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.5 / L = 74 | - | - | - | 12 | ||
418.84 € | 1 | 3 Days | 25 | IP 65; (on the housing: IP 65; on the shaft: IP 64) | flange: aluminium; housing cap: steel powder-coated | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.25 | - | 9-30 DC; ("supply class 2" to cULus) | Connector: 1 x M12, axial | - | Yes | - | - | 12steel Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110 | CANopen | - | 6000 | Yes | 98 | CAN | - | 3 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.5 / L = 74 | - | - | - | 12 | ||
680.40 € | 1 | 4 Days | 20 | IP 65; (on the housing: IP 67; on the shaft: IP 64) | flange: aluminium; housing: stainless steel (1.4521 / 444) | < 75 | III | Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316) | 0.1 | -40-85 | 18-30 DC; (to PELV) | - | - | Yes | - | - | - | - | - | - | Yes | 98; (condensation not permissible) | IO-Link | - | 1 | 65536 steps; 32768 revolutions; 31 bit | - | 12000 | 1000 | 30 | 1.1 | Ø 36 / L = 54.2 | A | - | COM3 (230.4 kBaud) | 12 |