Multiturn Solid Shaft Encoder (RM8002)

IFM ELECTRONIC

Product Details:

Manufacturer part number: RM8002

Brand: IFM ELECTRONIC

Price: 382.94 €

Delivery time: 4 Days

Technical Data:

Reference Temperature Torque: 25 °C

Protection: IP 65

Materials: flange: aluminium; housing: steel powder-coated

Current Consumption: < 30 mA

Protection Class: -

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

RM8002

Save
Product data
CAD data not available

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
RM8002

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Reference Temperature Torque (°C)	Protection	Materials	Current Consumption (mA)	Protection Class	Electrical Connection - Plug	Accuracy (°)	Storage Temperature (°C)	Operating Voltage (V)	Electrical Connection	Ambient Temperature (°C)	Code Signal	Reverse Polarity Protection	Transmission Standard	Shaft Material	Output Function	Protocol	Detection System	Max. Revolution, Mechanical (U/min)	Short-Circuit Protection	Max. Relative Air Humidity (%)	Communication Interface	Inputs	Max. Starting Torque (Nm)	Resolution	Code	Max. Revolution Electrical (U/min)	Max. Power-On Delay Time (ms)	Rated Insulation Voltage (V)	IO-Link Revision	Dimensions (mm)	Required Master Port Type	Transmission Type	Shaft Diameter (mm)
	382.94 €	1		4 Days	25	IP 65	flange: aluminium; housing: steel powder-coated	< 30	-	-	-	-	4.5-30 DC	-	-40-85	Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)	-	-	10steel Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110	-	-	-	12000	-	98	SSI data interface	reversal of direction of rotation; reset to zero	3	4096 resolution; 8192 revolutions; 25 bit	Gray code; (increasing code values when turned clockwise (seen on the shaft))	-	-	-	-	Ø 36.5 / L = 79	-	-	10

Basic information

Function Principle	Absolute	Revolution Type	multiturn	Shaft Design	solid shaft

This page is Multiturn Solid Shaft Encoder, part number RM8002.
You can find the detail information about specifications and dimensions on part number RM8002.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Protection Class
- III
Clear
Electrical Connection - Plug
- Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316)
Clear
Accuracy(°)
- 0.08
- 0.1
Clear
Storage Temperature(°C)
- -40-85
Clear
Electrical Connection
- Cable: 0.2 m, PUR; axial
- Connector: 1 x M12, axial
- Connector: 1 x M12, radial
- Connector: 1 x M12, axial; Moulded body: stainless steel (1.4401 / 316)
Clear
Reverse Polarity Protection
- Yes
Clear
Transmission Standard
- DPV2
Clear
Output Function
- CANopen interface
Clear
Protocol
- CANopen
- CIP (Common Industrial Protocol)
Clear
Detection System
- magnetic
Clear
Short-Circuit Protection
- Yes
Clear
Max. Revolution Electrical(U/min)
- 6000
- 12000
Clear
Max. Power-On Delay Time(ms)
- 1000
Clear
Rated Insulation Voltage(V)
- 30
Clear
IO-Link Revision
- 1.1
Clear
Required Master Port Type
- A
Clear
Transmission Type
- COM3 (230.4 kBaud)
Clear
Reference Temperature Torque(°C)
- 20
- 25
Clear
Protection
IP 65

IP 65; (on the housing: IP 65; on the shaft: IP 64)

IP 65; (on the housing: IP 67; on the shaft: IP 64)

IP 65; (on the housing: IP 67; on the shaft: IP 65)

IP 67

IP 67; (on the housing: IP 67; on the shaft: IP 67)

IP 68; IP 69K
Clear
Materials
flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L)

flange: aluminium; housing: stainless steel (1.4521 / 444)

Aluminium

Housing cap: aluminium; Housing: steel

flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating

flange: aluminium; housing: steel powder-coated
Clear
Current Consumption(mA)
- < 30
- < 75
- < 100; ((10 V DC) ; ≤ 50 (24 V DC))
- 100; ((24 V))
- 230; ((10 V DC); 100 (24 V DC))
Clear
Operating Voltage(V)
- 4.5-30 DC
- 9-30 DC
- 9-30 DC; ("supply class 2" to cULus)
- 10-30 DC
- 18-30 DC; (to PELV)
Clear
Ambient Temperature(°C)
- -40-85
- -25-85
Clear
Code Signal
- Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)
Clear
Shaft Material
6steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110
Fixing flange: synchro-flange

6steel
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110

10steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110
Fixing flange: clamping flange

10steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 180
Max. shaft load radial (at the shaft end) [N]: 180
Fixing flange: synchro-flange

10steel
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110

10stainless steel
Max. shaft load axial (at the shaft end) [N]: 180
Max. shaft load radial (at the shaft end) [N]: 180
Fixing flange: synchro-flange
Clear
Max. Revolution, Mechanical(U/min)
- 6000
- 12000
Clear
Max. Relative Air Humidity(%)
- 98
- 98; (condensation not permissible)
Clear
Communication Interface
- CAN
- DeviceNet
- IO-Link
- PROFIBUS DP
- SSI data interface
Clear
Inputs
- reversal of direction of rotation; reset to zero
Clear
Max. Starting Torque(Nm)
- 1
- 3
- 5
Clear
Resolution
4096 steps; 4096 revolutions; 24 bit

4096 resolution; 8192 revolutions; 25 bit

8192 steps; 4096 revolutions; 25 bit

65536 steps; 32768 revolutions; 31 bit
Clear
Code
- Gray code; (increasing code values when turned clockwise (seen on the shaft))
- binary
Clear
Dimensions(mm)
- Ø 36 / L = 65
- Ø 36.5 / L = 69.5
- Ø 36.5 / L = 79
- Ø 36.5 / L = 100
- Ø 36.8 / L = 76
- Ø 42 / L = 107.9
- Ø 58 / L = 79
- Ø 58 / L = 94
- Ø 58 / L = 110
Clear
Shaft Diameter(mm)
- 6
- 10
Clear

Filter by standard shipping days

All

3 Days or Less

4 Days or Less

62 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
RM7012
RM7013
RM8001
RM8006
RM9000
RM9001

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Reference Temperature Torque (°C)	Protection	Materials	Current Consumption (mA)	Protection Class	Electrical Connection - Plug	Accuracy (°)	Storage Temperature (°C)	Operating Voltage (V)	Electrical Connection	Ambient Temperature (°C)	Code Signal	Reverse Polarity Protection	Transmission Standard	Shaft Material	Output Function	Protocol	Detection System	Max. Revolution, Mechanical (U/min)	Short-Circuit Protection	Max. Relative Air Humidity (%)	Communication Interface	Inputs	Max. Starting Torque (Nm)	Resolution	Code	Max. Revolution Electrical (U/min)	Max. Power-On Delay Time (ms)	Rated Insulation Voltage (V)	IO-Link Revision	Dimensions (mm)	Required Master Port Type	Transmission Type	Shaft Diameter (mm)
925.13 €	1	4 Days	-	IP 65; (on the housing: IP 65; on the shaft: IP 64)	Aluminium	230; ((10 V DC); 100 (24 V DC))	-	-	-	-	10-30 DC	-	-40-85	-	Yes	-	10steel (1.4104) Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110 Fixing flange: clamping flange	-	CANopen	-	6000	-	98	CAN	-	-	8192 steps; 4096 revolutions; 25 bit	binary	-	-	-	-	Ø 58 / L = 110	-	-	10
1,014.74 €	1	4 Days	-	IP 67	Housing cap: aluminium; Housing: steel	230; ((10 V DC); 100 (24 V DC))	-	-	-	-	10-30 DC	-	-40-85	-	Yes	-	-	-	CIP (Common Industrial Protocol)	-	12000	Yes	98	DeviceNet	-	-	8192 steps; 4096 revolutions; 25 bit	binary	-	-	-	-	Ø 58 / L = 110	-	-	10
381.82 €	1	4 Days	25	IP 65	flange: aluminium; housing: steel powder-coated	< 30	-	-	-	-	4.5-30 DC	-	-40-85	Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)	-	-	6steel Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110	-	-	-	12000	-	98	SSI data interface	reversal of direction of rotation; reset to zero	3	4096 resolution; 8192 revolutions; 25 bit	Gray code; (increasing code values when turned clockwise (seen on the shaft))	-	-	-	-	Ø 36.5 / L = 69.5	-	-	6
506.06 €	1	62 Days	25	IP 65	flange: aluminium; housing: steel powder-coated	< 30	-	-	-	-	4.5-30 DC	Cable: 0.2 m, PUR; axial	-25-85	Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)	-	-	10steel Max. shaft load axial (at the shaft end) [N]: 40 Max. shaft load radial (at the shaft end) [N]: 110	-	-	-	12000	-	98	SSI data interface	reversal of direction of rotation; reset to zero	3	4096 resolution; 8192 revolutions; 25 bit	Gray code; (increasing code values when turned clockwise (seen on the shaft))	-	-	-	-	Ø 36.5 / L = 69.5	-	-	10
364.75 €	1	4 Days	20	IP 68; IP 69K	flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating	< 100; ((10 V DC) ; ≤ 50 (24 V DC))	III	-	0.08	-	9-30 DC; ("supply class 2" to cULus)	Connector: 1 x M12, axial	-40-85	-	Yes	-	10steel (1.4104) Max. shaft load axial (at the shaft end) [N]: 180 Max. shaft load radial (at the shaft end) [N]: 180 Fixing flange: synchro-flange	-	CANopen	-	6000	Yes	-	CAN	-	5	4096 steps; 4096 revolutions; 24 bit	binary	-	-	-	-	Ø 36.5 / L = 100	-	-	10
364.75 €	1	4 Days	20	IP 68; IP 69K	flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating	< 100; ((10 V DC) ; ≤ 50 (24 V DC))	III	-	0.08	-	9-30 DC; ("supply class 2" to cULus)	Connector: 1 x M12, axial	-40-85	-	Yes	-	10steel (1.4104) Max. shaft load axial (at the shaft end) [N]: 180 Max. shaft load radial (at the shaft end) [N]: 180 Fixing flange: synchro-flange	-	CANopen	-	6000	Yes	-	CAN	-	5	4096 steps; 4096 revolutions; 24 bit	binary	-	-	-	-	Ø 36.5 / L = 100	-	-	10