SmartSlice I/O System, I/O Units

The smartest modular I/O system
OMRON's SmartSlice I/O system is compact, intelligent and easy. When used with OMRON's CS1/CJ1 DeviceNet or CompoNet master units, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, PLC programming can be minimised. Preventive maintenance data collected by all I/O units can be accessed using CX-Integrator or NS-series Smart Active Parts.
• Most compact in the market (84 mm high)
• Easy set-up, backup and restore functions
• Diagnostics and preventive maintenance data at I/O level
• Detachable terminal blocks allow hot-swapping without re-wiring
• 3-wire I/O connection with 'push-in' technology, no screwdriver required

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
GRT1-CP1-L
GRT1-CT1
GRT1-CT1-1
GRT1-ID8-1

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Number Of Inputs	Input Format	Number of Outputs	Output Format	Output Current (A)	Number of Functions	Type of Voltage (Input Voltage)	Type of Electric Connection	Type of Digital Output	Type of Output Voltage	Suitable for CNC	Suitable for Electronic Positioning	Suitable for SSI	Input Current at Signal 1 (mA)	Number of Digital Inputs	Number of Digital Outputs	Permitted Voltage at Output (V)	Time Delay at Signal Change (ms)	Supply Voltage DC (V)	Permitted Voltage at Input (V)	Number of Analogue Outputs	Number of Analogue Inputs	Resolution of the Analogue Inputs	Output, voltage	Output, current	Suitable for single-axis positioning	Suitable for counting	Suitable for weighing	Suitable for multi-axis positioning	Suitable for incremental data detection	Digital outputs configurable	Digital inputs configurable	Short-circuit protection, outputs available	System accessory	Fieldbus connection over separate bus coupler possible	Degree of protection (NEMA)	Input, thermocouple	Output signal configurable	Input, resistance thermometer	Input, resistor	Input, voltage	Input, current	Input signal, configurable	Analogue inputs configurable	Analogue outputs configurable
453.47 €	1	3 Days	-	[DC input] PNP	-	[Other] Transistor Output (PNP, sourcing)	-	1	-	-	-	-	false	false	false	-	-	-	-	-	20.4 - 28.8	-	-	-	-	-	-	true	false	false	false	false	-	-	-	true	false	Other	-	-	-	-	-	-	-	-	-
330.53 €	1	3 Days	-	[DC input] NPN	-	[Other] Transistor Output (NPN, sinking)	-	1	-	-	-	-	false	false	false	-	-	-	-	-	20.4 - 28.8	-	-	-	-	-	-	true	false	false	false	false	-	-	-	true	false	Other	-	-	-	-	-	-	-	-	-
330.53 €	1	3 Days	-	[DC input] PNP	-	[Other] Transistor Output (PNP, sourcing)	-	1	-	-	-	-	false	false	false	-	-	-	-	-	20.4 - 28.8	-	-	-	-	-	-	true	false	false	false	false	-	-	-	true	false	Other	-	-	-	-	-	-	-	-	-
194.93 €	1	3 Days	8	[DC input] PNP	-	-	0	-	DC	Spring clamp connection	None	-	-	-	-	4	8	0	-	0.0 - 1.5	20.4 - 26.4	15 - 26.4	-	-	-	-	-	-	-	-	-	-	true	true	false	false	true	-	-	-	-	-	-	-	-	-	-

Basic information

Performance Level According to EN ISO 13849-1	Level a	Depth(mm)	74.4	Height(mm)	84
Width(mm)	15	Voltage Type (Supply Voltage)	DC	SIL According to IEC 61508	None
Explosion Safety Category for Dust	None	Explosion Safety Category for Gas	None	Number of HW-Interfaces Industrial Ethernet	0
Degree of Protection (IP)	IP20	Number of Interfaces PROFINET	0	Number of HW-Interfaces Other	1
Wall mounting/direct mounting	false	Suitable for rail mounting	true	Suitable for safety functions	false
IO link master	false	Supporting protocol for INTERBUS-Safety	false	Supporting protocol for KNX	false
Supporting protocol for PROFINET CBA	false	Supporting protocol for SafetyBUS p	false	Supporting protocol for SUCONET	false
Supporting protocol for INTERBUS	false	Supporting protocol for Data-Highway	false	Supporting protocol for DeviceNet	true
Supporting protocol for other bus systems	true	Supporting protocol for CAN	false	Supporting protocol for PROFIsafe	false
Supporting protocol for Foundation Fieldbus	false	Supporting protocol for PROFINET IO	true	Supporting protocol for AS-Interface Safety at Work	false
Supporting protocol for TCP/IP	false	Supporting protocol for Modbus	false	Supporting protocol for SERCOS	false
Supporting protocol for LON	false	Supporting protocol for DeviceNet Safety	false	Supporting protocol for EtherNet/IP	false
Supporting protocol for PROFIBUS	true	Supporting protocol for ASI	false	Number of HW-interfaces USB	0
Number of HW-interfaces RS-232	0	Number of HW-interfaces RS-485	0	Number of HW-interfaces RS-422	0

Configure

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Number Of Inputs
2

4

8
Clear
Number of Outputs
4

8
Clear
Output Format
- Other
  - Transistor Output (NPN, sinking)
  - Transistor Output (PNP, sourcing)
Clear
Output Current(A)
0

0.5

2
Clear
Number of Functions
- 1
Clear
Type of Voltage (Input Voltage)
- AC
- DC
Clear
Type of Electric Connection
- Spring clamp connection
Clear
Type of Digital Output
- None
- Transistor
Clear
Type of Output Voltage
- DC
Clear
Suitable for CNC
- false
Clear
Suitable for Electronic Positioning
- false
Clear
Suitable for SSI
- false
Clear
Input Current at Signal 1(mA)
- 4
Clear
Number of Digital Inputs
- 0
- 4
- 8
Clear
Number of Digital Outputs
- 0
- 4
- 8
Clear
Permitted Voltage at Output(V)
- 20.4 - 26.4
Clear
Time Delay at Signal Change(ms)
- 0.0 - 1.5
- 0 - 10
Clear
Supply Voltage DC(V)
- 20.4 - 26.4
- 20.4 - 28.8
Clear
Permitted Voltage at Input(V)
- 15 - 26.4
- 85 - 132
- 170 - 264
Clear
Number of Analogue Outputs
- 0
Clear
Number of Analogue Inputs
- 2
Clear
Resolution of the Analogue Inputs
- 13
Clear
Output, voltage
- false
Clear
Output, current
- false
Clear
Suitable for single-axis positioning
- true
Clear
Suitable for counting
- false
Clear
Suitable for weighing
- false
Clear
Suitable for multi-axis positioning
- false
Clear
Suitable for incremental data detection
- false
Clear
Digital outputs configurable
- true
Clear
Digital inputs configurable
- true
Clear
Short-circuit protection, outputs available
- false
- true
Clear
System accessory
- false
- true
Clear
Fieldbus connection over separate bus coupler possible
- false
- true
Clear
Degree of protection (NEMA)
- Other
Clear
Input, thermocouple
- true
Clear
Output signal configurable
- false
Clear
Input, resistance thermometer
- false
Clear
Input, resistor
- false
Clear
Input, voltage
- false
Clear
Input, current
- false
Clear
Input signal, configurable
- true
Clear
Analogue inputs configurable
- true
Clear
Analogue outputs configurable
- false
Clear
Input Format
- DC input
  - NPN
  - PNP
- AC input
Clear