GS MILL Long Neck, 2-Flute GSN2 (GSN205003506)
- Volume Discount
Product Details:
Manufacturer part number: GSN205003506
Brand: NACHI(FUJIKOSHI)
Price: 95.36 €
Delivery time: 6 Days
Technical Data:
Blade diameter (D): 5 φ
Blade length (ℓ): 7.5 mm
Shank diameter (d): 6 mm
Overall Length (L): 80 mm
Length under neck ℓ2: 35 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GSN205003506
Part Number
|
|---|
| GSN205003506 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Length under neck ℓ2 (mm) | O.D. Dc (mm) | Neck diameter D1 (mm) | Interference Angle (Degree) | Actual Effective Length for Workpiece Gradient Angle 0.5° (mm) | Actual Effective Length for Workpiece Gradient Angle 1° (mm) | Actual Effective Length for Workpiece Gradient Angle 2° (mm) | Actual Effective Length for Workpiece Gradient Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
95.36 € | 1 | Available | 6 Days | 5 | 7.5 | 6 | 80 | 35 | 5 | 4.9 | 0.77 | 36.5 | No Interference | No Interference | No Interference |
Loading...
Basic information
| work material | General Steel / Quenched and tempered steel / High Hardness Steel: to HRC55 / Stainless Steel / Cast Iron / Titanium | Number of flutes(sheet) | 2 | Type | Long-Neck Square |
|---|---|---|---|---|---|
| Coating | TiAlN | Machining Application | Plane / Side / Groove / Inclined Cuts | Blade tip shape | Sharp Edge |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) |
This page is GS MILL Long Neck, 2-Flute GSN2, part number GSN205003506.
You can find the detail information about specifications and dimensions on part number GSN205003506.
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| GSN200700604 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Length under neck ℓ2 (mm) | O.D. Dc (mm) | Neck diameter D1 (mm) | Interference Angle (Degree) | Actual Effective Length for Workpiece Gradient Angle 0.5° (mm) | Actual Effective Length for Workpiece Gradient Angle 1° (mm) | Actual Effective Length for Workpiece Gradient Angle 2° (mm) | Actual Effective Length for Workpiece Gradient Angle 3° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
55.10 € | 1 | Available | 6 Days | 0.7 | 1 | 4 | 45 | 6 | 0.7 | 0.67 | 6.84 | 6.26 | 6.54 | 7.18 | 7.96 |
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.