UT Coat, 4-Flute Long Neck Square CXS
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| CXS4010-030 |
| CXS4015-045 |
| CXS4020-060 |
| CXS4025-075 |
| CXS4030-090 |
| CXS4040-120 |
| CXS4050-150 |
| CXS4060-180 |
| CXS4080-240 |
| CXS4100-300 |
| CXS4120-360 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Underneck length (ℓ1) (mm) | JAN Code | Trusco Code | Blade diameter tolerance (mm) | Neck diameter φd1 (mm) | Shank Taper Angle Bta (°) | Actual Effective Length for Workpiece Gradient Angle of 30' (mm) | Actual effective length at work slope angle 1° (mm) | Actual Effective Length for Workpiece Gradient Angle of 1°30' (mm) | Actual Effective Length for Workpiece Gradient Angle of 2° (mm) | Actual Effective Length for Workpiece Gradient Angle of 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
62.75 € | 1 | 7 Days | 1 | 1.5 | 4 | 50 | 3 | - | - | 0~-0.02 | 0.96 | 16° | 3.25 | 3.35 | 3.47 | 3.59 | 3.86 | ||
62.75 € | 1 | 8 Days | 1.5 | 2.25 | 4 | 50 | 4.5 | - | - | 0~-0.02 | 1.46 | 16° | 4.66 | 4.81 | 4.97 | 5.15 | 5.53 | ||
58.72 € | 1 | 7 Days | 2 | 3 | 4 | 50 | 6 | - | - | 0~-0.02 | 1.94 | 16° | 6.24 | 6.44 | 6.66 | 6.89 | 7.41 | ||
58.72 € | 1 | 8 Days | 2.5 | 3.75 | 4 | 50 | 7.5 | - | - | 0~-0.02 | 2.44 | 16° | 7.79 | 8.04 | 8.31 | 8.60 | 9.25 | ||
67.37 € | 1 | 7 Days | 3 | 4.5 | 6 | 50 | 9 | - | - | 0~-0.02 | 2.95 | 16° | 9.34 | 9.64 | 9.97 | 10.31 | 11.09 | ||
67.37 € | 1 | 8 Days | 4 | 6 | 6 | 50 | 12 | - | - | 0~-0.02 | 3.86 | 16° | 12.61 | 13.02 | 13.46 | 13.92 | 14.97 | ||
72.41 € | 1 | 7 Days | 5 | 7.5 | 6 | 50 | 15 | 4560295082113 | 485-2851 | 0~-0.02 | 4.86 | 16° | 15.70 | 16.21 | 16.76 | No interference | No interference | ||
67.37 € | 1 | 7 Days | 6 | 9 | 6 | 50 | 18 | - | - | 0~-0.02 | 5.86 | - | No interference | No interference | No interference | No interference | No interference | ||
87.42 € | 1 | 8 Days | 8 | 12 | 8 | 60 | 24 | - | - | 0～-0.03 | 7.82 | - | No interference | No interference | No interference | No interference | No interference | ||
102.34 € | 1 | 7 Days | 10 | 15 | 10 | 70 | 30 | - | - | 0～-0.03 | 9.82 | - | No interference | No interference | No interference | No interference | No interference | ||
149.24 € | 1 | 7 Days | 12 | 18 | 12 | 90 | 36 | - | - | 0～-0.03 | 11.82 | - | No interference | No interference | No interference | No interference | No interference |
Loading...
Basic information
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Cast Iron / Titanium / Copper | Number of flutes(sheet) | 4 | Type | Long-Neck Square |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Groove / Inclined Cuts | Blade tip shape | With Lead | Torsion Angle (θ) | Standard Helix (30˚ to 40˚) |
Configure
Basic Attributes
-
Blade diameter (D)(φ)
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
JAN Code
-
Trusco Code
-
Type
- CXS
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.