Drilling Tap
- Promotional pricing ends 30/11/2024
- Volume Discount
This type is equipped with a drill at the tip so that screw pilot hole drilling and tapping can be performed simultaneously.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
DRT-M4-0.7
Basic information
| Screw Types | Meter | Nominal | M4 | Pitch(mm) | 0.7 |
|---|---|---|---|---|---|
| Tap Type | Thread-Cutting-Related Tool | Coating Y/N | Available | Surface Treatment | Oxidizing |
| Overall Length (L)(mm) | 62 | Sales Operation | Single Item | Hole Diameter(mm) | 3.3 |
| Shank square part(mm) | 3.1 | Shank diameter(mm) | 4.0 | Drill Length(mm) | 7 |
| Tap Length(mm) | 13 | Tool Material Details | SKH |
This page is Drilling Tap, part number DRT-M4-0.7.
You can find the detail information about specifications and dimensions on part number DRT-M4-0.7.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.