S...PDQN15 Type (Profiling) (Part Numbers)
-Machining applications: Inside diameter, through hole, profiling; Compatible insert shape: D (55° two-bolt); Compatible insert clearance angle: negative 0° (N); Clamping method: pin lock (P).
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| S25R-PDQNR15-32 |
| S32S-PDQNR15-44 |
| S40T-PDQNR15-54 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Minimum Machining Diameter φA | Cutting Direction | Full length L1 | Shank diameter φD | H (mm) | F (mm) | Drawing | S1 (mm) | L2 (mm) | θ | Compatible Tip | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
265.03 € | 1 | 9 Days | 32 | Right-hand | 200 | 25 | 24 | 17 | Figure 3 | 6.5 | 40 | 13° | DN○A1504.. | ||
295.86 € | 1 | 8 Days | 44 | Right-hand | 250 | 32 | 31 | 22 | Figure 4 | 6.5 | 50 | 13° | DN○G1504.. | ||
359.03 € | 1 | 9 Days | 54 | Right-hand | 300 | 40 | 39 | 27 | Figure 4 | 7.5 | 65 | 12° | DN○M1504.. |
Loading...
Basic information
| Applicable Tip Shape | D (55° Diamond-Shape) | Application | Inner diameter profiling | Clamp Shape | Pin Lock |
|---|---|---|---|---|---|
| Protrusion length (L/D) | Up to 3 | Lubrication Hole Y/N | N/A | S2(mm) | - |
| L3(mm) | - | L4(mm) | - | Standard corner R (rε) | 0.8 |
Configure
Basic Attributes
-
Minimum Machining Diameter φA
-
Full length L1
-
Shank diameter φD
-
H(mm)
-
F(mm)
-
Drawing
- Figure 3
- Figure 4
-
Type
- S25R
- S32S
- S40T
-
Cutting Direction
- Right-hand
- Left-hand
Filter by standard shipping days
-
- All
- 8 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.