CoroMill Plura HD, Carbide Solid End Mill (Square Center-Cut, Hardness: 48 HRC or Less)
- Volume Discount
[Features]
· Square, Center Cut
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
· Square, Center Cut
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 2P342-0400-PA-1730 |
| 2P342-0800-PA-1730 |
| 2P342-1000-PA-1730 |
| 2P342-1200-PA-1730 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shank diameter (d) (mm) | Overall Length (L) (mm) | Usable length (mm) | Maximum Cutting (mm) | Corner Chamfer Width | |
|---|---|---|---|---|---|---|---|---|---|
128.10 € | 1 | Available | 6 Days | 6 | 57 | 9.00 | 9.00 | 0.10mm | |
180.26 € | 1 | Available | 6 Days | 8 | 63 | 18.00 | 18.00 | 0.10mm | |
226.60 € | 1 | Available | 6 Days | 10 | 72 | 22.00 | 22 | 0.15mm | |
305.41 € | 1 | Available | 6 Days | 12 | 83 | 26.00 | 26 | 0.15mm |
Loading...
Basic information
| work material | General Steel / Cast Iron | Number of flutes(sheet) | 4 | Type | Square |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Shank diameter tolerance | h6 | Corner Chamfer | 45° |
| Maximum Ramping Angle(°) | 7 |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.