FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series (FX-MG-CS-10.4X90)

Volume Discount

OSG

Product Details:

Manufacturer part number: FX-MG-CS-10.4X90

Brand: OSG

Price: 172.33 €

Delivery time: 6 Days

Technical Data:

Tool Diameter (D): 2.6 mm

Large End Diameter: 10.4 mm

Tool No.: 9149104

Shank diameter (d): 8 mm

Tip diameter: 2.6 mm

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

FX-MG-CS-10.4X90

Product specification
Part Numbers
Catalog

Data to be displayed: 30; 45; 60

Part Number
FX-MG-CS-10.4X90

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Tool Diameter (D) (mm)	Large End Diameter (mm)	Tool No.	Shank diameter (d) (mm)	Tip diameter (mm)	Overall Length (mm)	Length of Taper part (mm)	Nominal
	172.33 €	1	Available	6 Days	2.6	10.4	9149104	8	2.6	65	(3.9)	10.4×8×3×65

Products homepage

Basic information

Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Tip angle (θ)	90	work material	General steel / Quenched and tempered steel / High hardness steel / Cast Iron / Aluminum / Copper / Graphite / Resin
Single blade, two blades	Single blade	Peripheral Blade Y/N	N/A	Tool Material Type	Carbide
Coating Y/N	Available	Coating Type	TiAlN

This page is FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series, part number FX-MG-CS-10.4X90.
You can find the detail information about specifications and dimensions on part number FX-MG-CS-10.4X90.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- FX-MG-CS
Clear
Tool Diameter (D)(mm)
1

2.5

2.6

3.1

3.8
Clear
Large End Diameter(mm)
6.3

8.3

10.4

12.4

16.5

20.5
Clear
Tool No.
9149063

9149083

9149104

9149124

9149165

9149205
Clear
Shank diameter (d)(mm)
6

8

10

12
Clear

Filter by standard shipping days

All

6 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
FX-MG-CS-12.4X90
FX-MG-CS-16.5X90
FX-MG-CS-20.5X90
FX-MG-CS-6.3X90
FX-MG-CS-8.3X90

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Tool Diameter (D) (mm)	Large End Diameter (mm)	Tool No.	Shank diameter (d) (mm)	Tip diameter (mm)	Overall Length (mm)	Length of Taper part (mm)	Nominal
176.78 €	1	Available	6 Days	2.5	12.4	9149124	10	2.5	65	(4.95)	12.4×10×4×65
209.54 €	1		6 Days	3.1	16.5	9149165	10	3.1	70	(6.7)	16.5×10×4×70
237.31 €	1		6 Days	3.8	20.5	9149205	12	3.8	70	(8.35)	20.5×12×5×70
119.56 €	1	Available	6 Days	1	6.3	9149063	6	1	55	(2.65)	6.3×6×2×55
134.56 €	1	Available	6 Days	2.5	8.3	9149083	6	2.5	55	(2.9)	8.3×6×2.5×55