Draw Clamp (Positioning Type)
[Features]
· As there is less cutting edge interference, it is optimal for clamping 5-axis processing machines and multi-function machines.
· A small-diameter upper clamp bolt draws in the workpiece, enabling powerful clamping.
· It is possible to position the receiving height of the workpiece with the flange.
· For DRC-FP, positioning and clamping can be performed simultaneously by drilling two reference holes that match the pin intersection in pre-machining.
· As there is less cutting edge interference, it is optimal for clamping 5-axis processing machines and multi-function machines.
· A small-diameter upper clamp bolt draws in the workpiece, enabling powerful clamping.
· It is possible to position the receiving height of the workpiece with the flange.
· For DRC-FP, positioning and clamping can be performed simultaneously by drilling two reference holes that match the pin intersection in pre-machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| DRC-3408FH |
| DRC-3408FP |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | F (mm) | H (mm) | Tolerance F (mm) | |
|---|---|---|---|---|---|---|---|
109.44 € | 1 | 6 Days | - | - | - | ||
118.85 € | 1 | 8 Days | 11 | 5 | -0.005 to -0.018 |
Loading...
Basic information
| A(mm) | 27 | B(mm) | 14 | C(mm) | 34 |
|---|---|---|---|---|---|
| D(mm) | 12 | E(mm) | 15 | G(mm) | M8 |
| I(mm) | 9.95 | J(mm) | 4 | K(mm) | 5.5 |
| L(mm) | 22 | Material | Body: SCM420, Bolt: SCM435 | Surface Treatment | Black Oxide |
| Mass(g) | 35 | Hardness | HRC55 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.