WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| WLS-HSCT-N-1X45X6X100 |
| WLS-HSCT-N-1X45X8X100 |
| WLS-HSCT-N-2X45X10X100 |
| WLS-HSCT-N-2X45X12X105 |
| WLS-HSCT-N-2X45X16X140 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Blade Length (mm) | Large End Diameter (mm) | Tool No. | Shank diameter (d) (mm) | Tip diameter (mm) | Overall Length (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
84.46 € | 1 | 6 Days | 2.5 | 6 | 9200176 | 6 | 1 | 100 | ||
106.86 € | 1 | 6 Days | 3.5 | 8 | 9200178 | 8 | 1 | 100 | ||
97.21 € | 1 | 6 Days | 4 | 10 | 9200180 | 10 | 2 | 100 | ||
123.62 € | 1 | 6 Days | 5 | 12 | 9200182 | 12 | 2 | 105 | ||
218.02 € | 1 | 6 Days | 7 | 16 | 9200186 | 16 | 2 | 140 |
Loading...
Basic information
| work material | General steel / Stainless Steel / Cast Iron / Aluminum / Titanium | Tool Material Type | Carbide | Coating Y/N | Available |
|---|---|---|---|---|---|
| Coating Type | Other | Application | 3 | Number of flutes(sheet) | 3 |
| Half Angle of Taper(Degree) | 45 | Tool Material Details | WXL coating |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.