Mounting Brackets（Page 2）

?* Information on days to ship and prices

• 

  Quick Strut, Hinge Side

  KAMEDA DENKI

  A hinge-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  Select to compare

  Configure now
  Starting from∗ ：	9.68 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Quick Strut, Hinge Receiver Side

  KAMEDA DENKI

  A receiver-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  Select to compare

  Configure now
  Starting from∗ ：	9.29 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Quick Strut, Fixed Type

  KAMEDA DENKI

  A fixed strut strut for supporting the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  Select to compare

  Configure now
  Starting from∗ ：	10.38 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Bar Holder, BHS

  KAMEDA DENKI

  A holder for screwing in low-voltage bus bars.
  
  [Features]
  · Freely adjustable bus bar interval widths for supporting each bus bar vertically.
  · Stays in place with a single bolt; compatible with a wide range of copper-band dimensions.
  · Made of polypropylene reinforced with glass fiber, providing ample strength

  Select to compare

  Configure now
  Starting from∗ ：	6.19 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Flat bar

  KAMEDA DENKI

  This is a flat bar with holes, with limitless applications in electrical work, piping, air conditioning work, wiring boards, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Reinforced Free Rail, Multifunctional-Type

  KAMEDA DENKI

  A reinforced, multifunctional DIN rail with a useful center nut.
  
  [Features]
  · Component can be attached to the rail center by inserting a free nut* on the inside.
  *Use the NS square nut for DA-301 and 302. N2 and N0 types can also be used.
  · Components that are not DIN rail-compatible can be mounted on this rail. .
  · DIN rail type of terminal block and compact terminal block (Higashizawa RT series or Kasuga TR series) can be mounted on the same rail.
  · By using the AC or NF bases, all types of components can be mounted.
  · Strong torsion resistance due to the unique form which does not shake even when used in long lengths.
  · Heavy-duty parts can also be mounted stably.
  · A simple design where the mounting hole pitch of 25 mm fits the duct hole pitch of 50 mm.

  Select to compare

  Configure now
  Starting from∗ ：	11.42 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Free Rail (Long Hole)

  KAMEDA DENKI

  A DIN standard compliant 35mm-width rail. (long hole)
  
  [Features]
  - Made of aluminum for light weight, ease of handling, and a nice finish.
  - Cutting is easy; no need to perform anti-rust treatment on the cut ends.
  - Any part compatible with JIS and DIN-standard rails can be mounted, regardless of manufacturer.
  - Parts and terminal blocks can be freely installed on and removed from any position on the rail, letting it accommodate design changes and added circuits.
  - Even parts which are not DIN rail compatible can be mounted using an attachment bracket such as an NF base

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.57 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Multi-angle Z type

  KAMEDA DENKI

  This is a Z-type angle with limitless applications in electrical work, air conditioning work, wiring boards etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	140.74 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Quick holder, KH【10 Pieces Per Package】

  KAMEDA DENKI

  A bracket for mounting wiring and other things by gripping it at an angle.
  
  [Features]
  - Bracket is fixed with one screw, minimizing the work required to form holes.
  - With the KH-65 and KH-100, the wiring can be directly fixed in place using a zip tie.
  - Brackets with insulation coating also available.

  Select to compare

  Configure now
  Starting from∗ ：	20.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Fitting - Switch Mounting Platform S-14【1-10 Pieces Per Package】

  KAMEDA DENKI

  Fitting for mounting switches and knobs.
  
  [Features]
  S-14Z is a Z-type for easy retrofitting.
  S-14F can be mounted onto free rail (DIN rail) at any location.

  Select to compare

  Configure now
  Starting from∗ ：	4.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MINI Canada duct mount【10 Pieces Per Package】

  KAMEDA DENKI

  A tool for mounting a control panel rear door wiring duct.
  
  [Features]
  ・Inserting a metal bracket into the pilot lamp or operation switch to secure the duct avoids the need to place stud bolts.
  ・3 varieties for use with 22φ, 25φ, and 30φ.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Triangle Bracket

  KAMEDA DENKI

  This is a triangular bracket for piping support.
  
  [Features]
  · This is a bracket which is used to support wall surface piping.
  · The stay is welded and is sturdier than L type brackets.
  · Both sides are the same length, so it can be used facing either up, down, left or right.

  Select to compare

  Configure now
  Starting from∗ ：	33.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wire Holding Clasp

  KAMEDA DENKI

  A clasp for affixing high-voltage lines to epoxy insulators.
  
  [Features]
  - For wiring high-voltage switchboards, high-voltage support insulators, isolators, and shutoff switches.
  - Manufactured following the JIS standard for resin formation technology (JISC3851) for stable quality.
  - Smaller, lighter, more shock resistant, and provides better electrical and mechanical properties than traditional porcelain insulators.
  - EP-O wire clasp sold separately.

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Short Bar【10-50 Pieces Per Package】

  KASUGA ELECTRIC

  An auxiliary accessory for simplifying cross-wiring.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ABC Channel【5-40 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use as structural material for wiring board, cubicle, and control panel, and the like.
  
  [Features]
  • You can perform design changes, expansions, and renovations as the user like.
  • Since outer box sheet metal processing and inner wiring are advanced through separate processes, the delivery time can be shortened.
  • If an equipment and parts wiring diagram is available, the user can proceed with assembly wiring without waiting for completion of the casing box.
  • Includes easy-to-use A.B.C. parts for the A.B.C. channel; improved efficiency.
  
  * The characteristics of molten zinc plating process result in plating film left on the angle length hole, and in roughness in the surface finish. Please be aware of this.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  FRP Structural Insulation Materials

  SHINOHARA ELECTRIC

  Structural materials manufactured from fiberglass-reinforced plastic (FRP). For use in places where insulation properties are required. Note: The width dimension of model CF-45 has been partially modified (46 mm → 45 mm).
  
  [Features]
  · The angle/channel/square pipe structural materials (manufactured from FRP) are base materials that have been reinforced with glass fiber. These are structural materials that have been combined with a thermosetting resin and have insulating properties and strength not provided by ordinary plastics.
  · This material is widely used as a structural insulating material.
  · Easy to cut, drill, and process by machine, etc.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	72.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Channel End Cap【50 Pieces Per Package】

  SHINOHARA ELECTRIC

  An ABC channel terminal protective cap.
  [Features]
  · Prevents damage from occurring due to burrs, etc. on the cut surface, thereby helping improve safety.
  There is no need to process cut surfaces, thereby helping improve work efficiency.
  Made of soft vinyl chloride resin.
  Resin wall thickness: 1.5 mm.
  [Applications]
  For protecting the ends of ABC channels.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Protection Plate Mounting Bracket

  SHINOHARA ELECTRIC

  Use the bracket for mounting protective plates on the inside of panels.
  
  [Features]
  · The protective plate can be suspended, so no troublesome cutting of keyholes is required.
  · The protection plate can be suspended, so no troublesome tapping of screw holes in the panel is required.
  · Easy to install and remove, so maintenance time for cleaning and inspection can be shortened by the improved workability.
  · No mounting screws are required, so installation can be performed safely without any concern for losing screws.
  · We can also manufacture products with an insulated protector plate (barrier plate) pre-installed. Please specify required dimensions.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.17 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Assist Clasp【50-100 Pieces Per Package】

  KOWA KASEI

  Useful for supporting base rail mounts.
  
  [Features]
  · Useful as a support clasp for supporting base rail mounts.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Wiring Bracket Hanger【50 Pieces Per Package】

  KOWA KASEI

  Useful for dealing with wiring bracket vibration
  
  [Features]
  · Attach to the wiring bracket to protect it from shocks.
  · Can be installed on the top or bottom.
  · Can be installed after wiring work is complete.
  · Wiring work can be performed after installation

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	100.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Key Ring, CR Series

  TAKACHI ELECTRONICS ENCLOSURE

  Key ring
  
  [Features]
  · Strap equipped with a hook made of metal.
  · Neck strap type includes removable parts and parts with adjustable length.
  · To be used as a set with the CR key ring.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounting Bracket, CK Series【2-100 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Mounting bracket

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Opening / Closing Hinge, FW Series

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Opening/Closing Hinge, (FW)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.52 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  L-type Mounting Bracket, HYCL Series【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  L-type Mounting Bracket (HYCL Series)
  
  [Features]
  · To be used for mounting circuit boards or chassis other than HYC type HY dedicated chassis.
  · L-bracket and screw set-only product.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  L-bracket, MSCL Series【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  L-bracket (MSCL Series)
  
  [Features]
  · To be used for mounting circuit boards or chassis other than MSC type MS/MSN/MSY/MO/MON/MOY dedicated chassis.
  · L-bracket-only product.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  OFL Series, external installation foot【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  OPCMOPCP/OABP/RPCP/WPCP/WABP Dedicated External Mounting Foot
  
  [Features]
  · Attached using the included screws after first inserting into the holes on the bottom

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hinge OHI Series【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Hinge (OHI)
  
  [Features]
  - Mounting template with screws included

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chassis mounting bracket UCK-P Series【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Chassis mounting bracket (UCK-P) for UC/UCN/UCY.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  External Mounting Feet HQF Series【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - External mounting feet for HQ.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Unit Panel Mounting Bar, UTB Series

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Use when installing a unit panel on a rear surface

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Chassis Reinforcement Bracket, AC-K Series

  TAKACHI ELECTRONICS ENCLOSURE

  Chassis Reinforcement Bracket (AC-K)
  
  [Features]
  · To be used as a reinforcing anchor to prevent deflection of the central part of the chassis when a load is placed on it. (When actually used, it must be checked by using the load resistance test of the product.)
  · Holes must be bored into the chassis for mounting.

  Select to compare

  Configure now
  Starting from∗ ：	11.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  BFL Type - External Plastic Mounting Stand【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  The product has an added gray color to match the color of the BCPC/BCPK/BCPR series.
  
  [Features]
  · Optional part.
  ▪ This is a plastic mounting stand that looks like a box.
  ▪ The product is strong as it is made from glass fiber-reinforced polycarbonate

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  External Mounting Feet, CKF Series【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · These are plastic external mounting feet. *Please note that mounting screws must be purchased separately.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chassis Fixing Bracket, FCK Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Chassis Anchoring Bracket (FCK Series)
  
  [Features]
  · To be used for mounting DIN rails, etc. (other than those for dedicated chassis).
  · In the FCK-1, the chassis is 13 mm from the panel, and 23 mm in the FCK-2.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Panel Vibration Stopping Bracket, UCF Series【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Panel Vibration Prevention Bracket (UCF) for UC, UCN, and UCY
  
  [Features]
  · To be used for suppressing vibration of the front and back panels of a case.
  · Can be used in combination with a chassis mounting bracket.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rail support【1-10 Pieces Per Package】

  KASUGA ELECTRIC

  [Features]
  · Simplifies wiring by lifting the rail and changing the mounting angle.
  · Enables the mounting of terminal blocks to corners of boards and inside confined mounting spaces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  AD BDN Type Accessories: External Mounting Feet【2-4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Dedicated external mounting feet for the AD and BDN type.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FCC-K Model Chassis Reinforcement Fixture【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Used as a reinforcing fixture for the central part of the chassis when placing a load on the chassis.
  · Boring holes (2-φ3.5) into the chassis and panel side is necessary when mounting to a chassis.
  · The positioning can be adjusted as required by changing the hole boring position.
  · If the chassis mounting fitting FCK-1 is used, please use the FCC-K-1 fixture.
  · If the chassis mounting fitting FCK-2 is used, please use the FCC-K-2 fixture.

  Select to compare

  Configure now
  Starting from∗ ：	5.88 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stud Bar

  MIRAI INDUSTRY

  [Features]
  · Boxes can be easily mounted using a wall face or slab reinforcement, preventing tilting and anchoring the box in place (box can be anchored in a straight orientation).
  · The bar is a freely bendable φ4 mm iron wire, so the height of the box can be freely adjusted based on the thickness of the wall.

  Select to compare

  Configure now
  Starting from∗ ：	2.71 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  New Stud Bar

  MIRAI INDUSTRY

  [Features]
  · A connector can be mounted to the knockouts on the back of the box.
  · Lean prevention bar is available in φ4-mm and easy-to-bend φ 3-mm types (excluding notched and adhesive types).
  · A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
  · Types with knockouts (without 9.5-mm stud) can be mounted even for boxes with heat insulating covers or boxes with heat insulating sheets attached (those with knockouts on the back cannot be used).

  Select to compare

  Configure now
  Starting from∗ ：	2.71 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  New Stud Bar (with knock)

  MIRAI INDUSTRY

  [Features]
  · A connector can be mounted to the knockouts on the back of the box.
  · Lean prevention bar comes in 4 mm and easy-to-bend 3 mm diameter types (excluding notched and adhesive types).
  · A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
  · Types with knockouts (no 3 minute start) can be mounted even for boxes with heat-insulating covers or boxes with heat-insulating sheets attached (those with knockouts on back cannot be used).

  Select to compare

  Configure now
  Starting from∗ ：	3.61 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  STPS-type strap

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A strap with cord attachable to the CS, CSS, and PS series.
  · Two types: portable strap and neck strap. Choose from 6 colors.
  · The neck strap contains removable parts, allowing for only devices to be attached and detached while the strap is around your neck.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  GZBC Series Battery Fittings

  SETTSU METAL INDUSTRIAL

  [Features]
  · Attachable metal fittings for use with batteries in a compatible plastic case.
  · The negative side is a spring, making it easy to distinguish between positive and negative.
  · Fit-in type makes mounting easy.

  Select to compare

  Configure now
  Starting from∗ ：	8.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ABC Parts (TCK)

  SHINOHARA ELECTRIC

  ● Applications:
  
  Use for 48 square DIN standard device mounting.

  Select to compare

  Configure now
  Starting from∗ ：	10.18 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  ABC Parts (TK)

  SHINOHARA ELECTRIC

  ● Applications:
  
  For use as the installation bracket for knobs or toggle switches on distribution boards, control panels or operating panels.

  Select to compare

  Configure now
  Starting from∗ ：	4.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...