Carbide Square End Mills（Machining Application：Plane Page 9）
Search by sub-category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.- Volume Discount
Configure nowStarting from∗ ： 58.00 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI SEIKO
High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.- Volume Discount
Configure nowStarting from∗ ： 52.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.- Volume Discount
Configure nowStarting from∗ ： 85.50 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI SEIKO
A long shank type, it also features neck relief, enabling deep engraving operation.- Volume Discount
Configure nowStarting from∗ ： 73.86 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SED2 Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.- Volume Discount
Configure nowStarting from∗ ： 34.73 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SED2L Long Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
SED2L, Long square end mill, 2-flute, uncoated
-The long design enables milling of deep cavities.
-Sharp helix angle (45 to 60°).- Volume Discount
Configure nowStarting from∗ ： 66.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SED2LA Long Square End Mill, 2-Flute, OK Coated
OKAZAKI SEIKO
SED2LA, Long square end mill, 2-flute, OK coating
-The long design enables milling of deep cavities
-Sharp helix angle (45 to 60°).- Volume Discount
Configure nowStarting from∗ ： 89.71 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SED2M Medium Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.- Volume Discount
Configure nowStarting from∗ ： 34.73 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SED2MA Medium Square End Mill, 2-Flute, OK Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.- Volume Discount
Configure nowStarting from∗ ： 50.59 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SED4 Square End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.- Volume Discount
Configure nowStarting from∗ ： 34.73 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SED4A Square End Mill, 4-Flute, OK Coated
OKAZAKI SEIKO
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.- Volume Discount
Configure nowStarting from∗ ： 50.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SED4MA Medium Square End Mill, 4-Flute, OK Coated
OKAZAKI SEIKO
A 4-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.- Volume Discount
Configure nowStarting from∗ ： 54.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SEE3 High-Helix End Mill, 3-Flute, Non-Coated
OKAZAKI SEIKO
3-flute type with high-torsion grooves enables everything from rough machining to finishing- Volume Discount
Configure nowStarting from∗ ： 47.42 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SEE4 High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.- Volume Discount
Configure nowStarting from∗ ： 47.42 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated
OKAZAKI SEIKO
End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials- Volume Discount
Configure nowStarting from∗ ： 51.65 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.- Volume Discount
Configure nowStarting from∗ ： 73.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated
OKAZAKI SEIKO
The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.- Volume Discount
Configure nowStarting from∗ ： 99.24 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
[Features]
Slim carbide end mill with 4 cutting edges.
Resists chipping and can be used in a wide range of applications, from general steel to stainless steel.
The slim shank design allows flexible adjustment of projection length.- Volume Discount
Configure nowStarting from∗ ： 78.09 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated
OKAZAKI SEIKO
The reverse step design eliminates shank interference when performing mold pocket processing.- Volume Discount
Configure nowStarting from∗ ： 103.47 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI SEIKO
Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.- Volume Discount
Configure nowStarting from∗ ： 90.77 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SPSED2A SP Series Square End Mill 2-Flute OK Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.- Volume Discount
Configure nowStarting from∗ ： 15.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SPSED4A SP Series Square End Mill 4-Flute OK Coated
OKAZAKI SEIKO
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.- Volume Discount
Configure nowStarting from∗ ： 26.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated
OKAZAKI SEIKO
A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.- Volume Discount
Configure nowStarting from∗ ： 24.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated
OKAZAKI SEIKO
It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.- Volume Discount
Configure nowStarting from∗ ： 24.15 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
OKAZAKI SEIKO
Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.- Volume Discount
Configure nowStarting from∗ ： 74.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI SEIKO
High torsion roughing endmill ideal for roughing aluminum material.- Volume Discount
Configure nowStarting from∗ ： 117.35 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.- Volume Discount
Configure nowStarting from∗ ： 135.08 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESS (Short)
KYOCERA
[Features]
A solid end mill suitable for general steel, high hardness steel, stainless steel and other workpieces.Short design, 2 cutting edges.
MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Features]
Suitable for finishing of general steel, stainless steel, aluminium, etc.- Volume Discount
Configure nowStarting from∗ ： 21.52 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
[Features]
A solid end mill suitable for general steels, high hardness steels, stainless steels and other work pieces, medium design, 2 cutting edges.
MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Features]
Suitable for finishing general steels, stainless steels, aluminium, etc.- Volume Discount
Configure nowStarting from∗ ： 17.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESL (Long)
KYOCERA
[Features]
A solid end mill suitable for general steel, high hardness steel, stainless steel and other work pieces, long design, 2 cutting edges.
MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Features]
Suitable for finishing general steel, stainless steel, aluminium, etc.Configure nowStarting from∗ ： 69.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKS (Short)
KYOCERA
MEGACOAT for excellent abrasion and heat resistance, a high-quality cutting edge and reduced burrs for high precision machining.- Volume Discount
Configure nowStarting from∗ ： 28.63 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKM (Medium)
KYOCERA
MEGACOAT for excellent abrasion and heat resistance, a high-quality cutting edge and reduced burrs for high precision machining.- Volume Discount
Configure nowStarting from∗ ： 28.63 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Focus on Accuracy / Finished Surface 4FESM
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel and other workpieces, 4 cutting edges.
The MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
It can be drilled and chamfered at the same time.
[Features]
Suitable for finishing general steel, stainless steel, aluminium, etc.- Volume Discount
Configure nowStarting from∗ ： 59.37 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel and other workpieces, 3 cutting edges.
The MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
The sharp edges can suppress burrs.
[Features]
Suitable for automatic turning of general steel, stainless steel, aluminium, etc.Configure nowStarting from∗ ： 45.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW
KYOCERA
[Features]
A solid end mill, suitable for general steel, stainless steel and other workpieces, 4 cutting edges.
The MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
The sharp edges can suppress burrs.
[Features]
Suitable for automatic turning machining of general steel, stainless steel, aluminium, etc.Configure nowStarting from∗ ： 132.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type)
KYOCERA
Unique variable distribution and lead allow excellent chatter resistance.Configure nowStarting from∗ ： 115.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 90.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Fiber Cutter with End Cutting Edge with / without Coating CSFRPE
EIKOSHA
- Volume Discount
Configure nowStarting from∗ ： 93.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
PCD 2-Flute Spiral Square End Mill DSE-2
KYOWA SEIKO
The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.Configure nowStarting from∗ ： 575.41 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide End Mill with 2 Flutes for Resin Processing PSE-2
KYOWA SEIKO
[Features]
An end mill with medium cutting edge length for machining plastics, 2 cutting edges.
This product can be used alone for edge milling a workpiece due to its square shape.
[Features]
Suitable for plate milling, side milling, slot milling, plunging (Z-feed), ramp milling and facing.- Volume Discount
Configure nowStarting from∗ ： 52.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide End Mill for Rib for Resin Processing PRE-2
KYOWA SEIKO
Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.- Volume Discount
Configure nowStarting from∗ ： 63.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
KYOWA SEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / CountersinkingConfigure nowStarting from∗ ： 70.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Flutes KSET-2
KYOWA SEIKO
[Features]
A carbide end mill with 2 cutting edges, suitable for general steel, stainless steel and other workpieces.
The high cutting speed and high production efficiency lead to a reduction in overall production costs.
[Features]
Suitable for plate milling, side milling, grooving, grooving (Z feed), ramp milling and facing.- Volume Discount
Configure nowStarting from∗ ： 87.60 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Flutes and Corner C Face KSC-2
KYOWA SEIKO
[Features] It can be used for flat surface machining, side machining, grooving, and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 77.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cutting, and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 75.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | EIKOSHA | EIKOSHA | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO |
| Product Series | SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated | SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated | SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated | SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated | SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated | Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESS (Short) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESL (Long) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKS (Short) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKM (Medium) | Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW | Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW | Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type) | Carbide Solid Fiber Cutter with End Cutting Edge with / without Coating CSFRPE | Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC | ||||||||||||||||||||||||||||||
| Starting from∗ | 58.00 € *Unit price with basic configuration Volume Discount | 52.71 € *Unit price with basic configuration Volume Discount | 85.50 € *Unit price with basic configuration Volume Discount | 73.86 € *Unit price with basic configuration Volume Discount | 34.73 € *Unit price with basic configuration Volume Discount | 66.45 € *Unit price with basic configuration Volume Discount | 89.71 € *Unit price with basic configuration Volume Discount | 34.73 € *Unit price with basic configuration Volume Discount | 50.59 € *Unit price with basic configuration Volume Discount | 34.73 € *Unit price with basic configuration Volume Discount | 50.59 € *Unit price with basic configuration Volume Discount | 54.82 € *Unit price with basic configuration Volume Discount | 47.42 € *Unit price with basic configuration Volume Discount | 47.42 € *Unit price with basic configuration Volume Discount | 51.65 € *Unit price with basic configuration Volume Discount | 73.86 € *Unit price with basic configuration Volume Discount | 99.24 € *Unit price with basic configuration Volume Discount | 78.09 € *Unit price with basic configuration Volume Discount | 103.47 € *Unit price with basic configuration Volume Discount | 90.77 € *Unit price with basic configuration Volume Discount | 15.70 € *Unit price with basic configuration Volume Discount | 26.27 € *Unit price with basic configuration Volume Discount | 24.15 € *Unit price with basic configuration Volume Discount | 24.15 € *Unit price with basic configuration Volume Discount | 74.91 € *Unit price with basic configuration Volume Discount | 117.35 € *Unit price with basic configuration Volume Discount | 135.08 € *Unit price with basic configuration Volume Discount | 21.52 € *Unit price with basic configuration Volume Discount | 17.83 € *Unit price with basic configuration Volume Discount | 69.55 € *Unit price with basic configuration | 28.63 € *Unit price with basic configuration Volume Discount | 28.63 € *Unit price with basic configuration Volume Discount | 59.37 € *Unit price with basic configuration Volume Discount | 45.19 € *Unit price with basic configuration | 132.21 € *Unit price with basic configuration | 115.04 € *Unit price with basic configuration | 90.13 € *Unit price with basic configuration Volume Discount | 93.70 € *Unit price with basic configuration Volume Discount | 575.41 € *Unit price with basic configuration | 52.69 € *Unit price with basic configuration Volume Discount | 63.27 € *Unit price with basic configuration Volume Discount | 70.68 € *Unit price with basic configuration | 87.60 € *Unit price with basic configuration Volume Discount | 77.02 € *Unit price with basic configuration Volume Discount | 75.96 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 10 Days | 8 Days | 8 Days | 10 Days | 7 Days | 6 Days | 10 Days | 10 Days | 10 Days | 7 Days | 6 Days | 10 Days | 10 Days | 10 Days | 10 Days | 7 Days | 10 Days | 10 Days | 10 Days | 10 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 10 Days | 10 Days | 9 Days | 6 Days | 6 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days |
| Blade diameter (D)(φ) | 1 ～ 12 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.4 ～ 32 | 3 ～ 20 | 3 ～ 20 | 1 ～ 12 | 1 ～ 12 | 2 ～ 32 | 2 ～ 32 | 3 ～ 12 | 3 ～ 20 | 3 ～ 25 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 5 ～ 22 | 5 ～ 22 | 6 ～ 20 | 1 ～ 25 | 5 ～ 12 | 3 ～ 20 | 3 ～ 25 | 5 ～ 25 | 6 ～ 20 | 6 ～ 20 | 1.5 ～ 3 | 0.5 ～ 2.5 | 4 | 3 | 3 | 3.5 ～ 10 | 4 | 12 | 8 | 3 ～ 20 | 3 ～ 20 | 0.2 ～ 6 | 0.2 ～ 6 | 0.3 ～ 5 | 1 ～ 16 | 0.1 ～ 6 | 1 ～ 6 | 3 ～ 6 |
| work material | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | - | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] |
| Blade length (ℓ)(mm) | 3 ～ 32 | 10 ～ 45 | 10 ～ 45 | 10 ～ 45 | 1 ～ 55 | 15 ～ 80 | 15 ～ 80 | 4 ～ 36 | 4 ～ 36 | 6 ～ 55 | 6 ～ 55 | 12 ～ 36 | 10 ～ 45 | 10 ～ 50 | 10 ～ 45 | 15 ～ 80 | 15 ～ 80 | 8 ～ 32 | 8 ～ 32 | 15 ～ 45 | 2.5 ～ 45 | 15 ～ 25 | 10 ～ 45 | 10 ～ 50 | 12 ～ 45 | 15 ～ 45 | 15 ～ 45 | 2.3 ～ 4.5 | 1 ～ 8 | 17 | 4.5 | 10 | 10 ～ 22 | 4 | 8 | 19 | 10 ～ 45 | 10 ～ 45 | 0.2 ～ 3 | 0.6 ～ 21 | 0.6 ～ 10 | 2 ～ 32 | 0.2 ～ 13 | 3 ～ 13 | 10 ～ 15 |
| Number of flutes(sheet) | 2 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 3 | 4 | 4 | 4 | 4 | 4 | 4 | 6 | 2 | 4 | 3 | 4 | 4 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 4 | 3 | 4 | 4 | 6 ～ 16 | Outer Diameter 6/Bottom Blade 3 ～ Outer Diameter 16/Bottom Blade 8 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Type | Square | High Helical | High Helical | High Helical | Square | Long-Neck Square | Long-Neck Square | Square | Square | Square | Square | Square | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | Square | Square | Square | High Helical | High Helical | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square |
| Coating | DLC | Non-Coated | DLC | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | TiAlN | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | TiAlN | Non-Coated | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | DLC | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | TiCN | Non-Coated | Non-Coated |
| Shank diameter (d)(mm) | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 32 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 32 | 4 ～ 32 | 6 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 4 ～ 25 | 6 ～ 12 | 6 ～ 20 | 6 ～ 25 | 4 ～ 25 | 6 ～ 20 | 6 ～ 20 | 4 ～ 6 | 4 | 6 | 6 | 6 | 6 ～ 10 | 4 | 10 | 8 | 4 ～ 20 | 4 ～ 20 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 16 | 3 ～ 6 | 4 ～ 6 | 6 |
| Overall Length (L)(mm) | 45 ～ 75 | 45 ～ 105 | 45 ～ 105 | 70 ～ 800 | 45 ～ 130 | 70 ～ 150 | 70 ～ 150 | 45 ～ 75 | 45 ～ 75 | 45 ～ 130 | 45 ～ 130 | 45 ～ 75 | 45 ～ 105 | 45 ～ 120 | 45 ～ 105 | 70 ～ 150 | 70 ～ 150 | 70 ～ 150 | 70 ～ 150 | 50 ～ 105 | 45 ～ 120 | 50 ～ 75 | 45 ～ 105 | 45 ～ 120 | 50 ～ 120 | 50 ～ 105 | 50 ～ 105 | 45 ～ 50 | 45 | 50 | 50 | 50 | 50 ～ 70 | 45 | 45 | 70 | 50 ～ 110 | 50 ～ 110 | 50 ～ 60 | 45 ～ 100 | 45 ～ 100 | 45 ～ 100 | 40 ～ 50 | 40 ～ 50 | 50 |
| Underneck length (ℓ1)(mm) | - | - | - | 15 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane |
| Blade tip shape | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | C plane | C plane | C plane | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | - | Sharp Edge | - | Sharp Edge | Sharp Edge | - | Sharp Edge | C plane | Sharp Edge |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.775
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.875
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.4
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.3688
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.5626
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9502
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.5438
- 7.6
- 7.7
- 7.8
- 7.9
- 7.9502
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.1186
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.525
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.3124
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.7188
- 10.8
- 10.9
-
11～11.9126
- 11
- 11.0998
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.5062
- 11.6
- 11.7
- 11.8
- 11.9
- 11.9126
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.8938
- 13
- 13.1
- 13.2
- 13.4
- 13.4874
- 13.5
- 13.6
- 13.8
- 13.8938
-
14～14.8
- 14
- 14.1
- 14.2
- 14.2748
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.875
- 15.88
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.4498
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.2626
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.05
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.6502
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.4376
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.225
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.4188
- 23.5
- 23.6
- 23.7998
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.1874
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.0002
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7876
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.575
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9626
- 30
- 30.1752
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
- 30.9626
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.75
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.3502
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.4998
- 36.5
- 36.8
-
37～37.6936
- 37
- 37.2
- 37.5
- 37.6
- 37.6936
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.7002
- 39
- 39.2
- 39.5
- 39.6
- 39.7002
-
40～40.8
- 40
- 40.4
- 40.4876
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.28
- 41.5
- 41.6
-
42～42.8498
- 42
- 42.4
- 42.5
- 42.8
- 42.8498
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.4312
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.2252
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.1876
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.7502
- 58
- 58.5
- 58.7502
-
59～59.5376
- 59
- 59.5
- 59.5376
-
60～60.5
- 60
- 60.5
-
62
-
63～63.5
- 63
- 63.5
-
64
-
65
-
66
-
67
-
70～70.5
- 70
- 70.5
-
72
-
75
-
76
-
77.95
-
80
-
83
-
85
-
90
-
100
-
103
-
110
-
115
-
120
-
125
-
130
-
150
-
200
[4-75/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- NS TOOL (84)
- OSG (73)
- SANDVIK (39)
- OKAZAKI SEIKO (38)
- NACHI(FUJIKOSHI) (26)
- UNION TOOL (23)
- 7 LEADERS (16)
- KYOWA SEIKO (14)
- KYOCERA (11)
- EIKOSHA (8)
- ATOM (5)
- ASAHI TOOLS (3)
- GUHRING (1)
- SANKO MFG (1)
- WIDIN (0)
- PROCHI (0)
- TAIYO-TOOL (0)
- TOYO DRILL (0)
- DIJET (0)
- THE CUT (0)
- GCT (0)
- SPEED TIGER (0)
- VAN_HOORN (0)
CAD data type
-
- 2D
- 3D
Categories related to Carbide Square End Mills
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.