Carbide Square End Mills（Machining Application：Plunging (Z feed) Page 2）

Search by sub-category

108

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

2-Flute, Stub Shape, FX-MG-EDSS

OSG

Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.

Select to compare

Configure now
Starting from^∗ ：	61.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Stub Shape (Gut Mill) WX-G-EDSS

OSG

Powerful 2-flute end-mill with reinforced base blade corner section. Heavy cutting is possible because of the short blade length high rigidity. Achieves reduction in lead-time during mass production processes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Medium, MG-EDN

OSG

Pin corner.

Select to compare

Configure now
Starting from^∗ ：	53.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Miniature, Short, MG-EDS-3

OSG

Uses carbide alloy that increases in great intensity to Young's modulus.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long FX-MG-EDL

OSG

General-purpose 2-flute end-mill long blade type with heat resistant FX coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	126.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long MG-EDL

OSG

Pin corner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, for Steel / Aluminum Alloy / Plus Check (HSK Compatible) CRN-HS-EDS

OSG

A minimum tool protrusion amount can be set with 2-plane binding HSK holder. Suitable for high-speed mass production of copper electrodes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	61.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Miniature Short for Steel / Aluminum Alloy / Plus Check

OSG

Hightly lubricant CRN coating performs excellently on copper alloy, aluminum alloy, and plastic machining. Also perfectly suited for detail work on copper electrodes and copper alloy IT components.

Select to compare

Configure now
Starting from^∗ ：	46.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long for Steel / Aluminum Alloy / Plus Check, CRN-EDL-4

OSG

Hightly lubricant CRN coating performs excellently on copper alloy, aluminum alloy, and plastic machining. Produces a shiny, beautiful finished surface when used for copper electrode work.

Select to compare

Configure now
Starting from^∗ ：	60.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, for Steel / Aluminum Alloy, Short, CA-RG-EDS

OSG

For copper, aluminum alloy. Well suited for finishing work on surfaces thanks to good cutting capabilities and a unique chatter preventing blade design.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, Short, DLC-ETS

OSG

Its own ultra-smooth new DLC coating prevents welding. Achieves high-speed high-efficiency machining in aircraft aluminum parts.

Select to compare

Configure now
Starting from^∗ ：	62.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, for Slotting, Stub Shape, WX-SHTSS

OSG

End mill is set to allow for continuous groove machining without prior thrust machining, all with a single piece. Makes it possible to reduce the number of magazine tools.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, for Steel / Aluminum Alloy, Short, CA-ETS

OSG

Great cutting sharpness and wide flutes that removes swarf swiftly contribute to fast, efficient grooving and side surface machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE

OSG

Provides a wide variety of cutter paths, among high precision, high efficiency standing-wall machining, such as helical processing, contouring, ramping. Due to a long, slim shank, over-hang length is freely adjusted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CBN End Mill, 1-Flute, Short, MBOS

OSG

End mill with soldering CBN tip. Exhibits power in processing tempered steel.

Select to compare

Configure now
Starting from^∗ ：	150.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2-Flute, Regular Type, GF-EDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Shank, Regular Type, GF-LS-EDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	105.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Type, GF-EDL

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	111.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Diamond End Mills 1-Flute Short Type MDOS

OSG

End mills with sintered diamond tip rows. Allow efficient machining of non-ferrous alloy and graphite.

Select to compare

Configure now
Starting from^∗ ：	263.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Helix Short Type FX-MG-EHS

OSG

4-flute groove cutting has fantastic chip evacuation, and prevents burrs with its excellent sharpness. 3-flute strong against chatter vibrations is also available.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Neck, Short, DLC-LN-EDS

OSG

Short blade long neck type end mill which has been subjected to ultra-smooth DLC coating. Offers excellent performance with difficult to weld rolling aluminum alloy.

Select to compare

Configure now
Starting from^∗ ：	62.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Neck, Short, FX-LN-EDS-6

OSG

Long Neck End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center the well.

Select to compare

Configure now
Starting from^∗ ：	65.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Neck, Short (Deep Rib) WX-LN-EDS

OSG

Ideal for machining of micro parts where interference in rib grooving and processing time can cause issues. Please select the effective length to match the machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS

OSG

High efficiency even in large protruding, rigid higher short blade Long Neck shape that enables highly precise machining. Suitable for high-speed, high-precision machining of copper electrode.

Select to compare

Configure now
Starting from^∗ ：	62.97 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

HMS, HM Coated 3-6 Flute Square

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.10 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)

NS TOOL

Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL-3LS Long Shank End Mill for Aluminum (Under-Shank)

NS TOOL

A slim type with a narrower shank than the blade diameter, supporting vertical wall processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSE345 MUGEN-COATING 3-Flute End Mill

NS TOOL

Adopts a unique Infinity coating for 3-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSZ345 MUGEN-COATING POWER "Z" End Mill

NS TOOL

With the newly developed special blade shape, machining capacity is greatly improved. Achieves unprecedented high performance machining from plunging to grooving

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DLC-AZS DLC Coated, 3-Flute Long Neck Square

UNION TOOL

[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· The DLC coating provides outstanding wear resistance and resistance to weld adhesion
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat land
· O.D. Tolerance: 0/-0.015 (D ≤ 6), 0/-0.005 (D ≥ 8)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Super One-Cut End Mill DV-SOCS3

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	263.06 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

DZ-COAT Solid End Mill, DZ-DES2-L Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DZ-COAT Solid End Mill, DZ-DES2-S Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	75.30 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	79.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Cut End Mill SPC Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	264.58 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill LS-OCFS2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	119.43 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS2-L Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	105.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS2-M Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.08 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS2-S Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	59.65 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS4-L Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	111.29 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS4-S Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.01 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

PCD 2-Flute Spiral Square End Mill DSE-2

KYOWA SEIKO

The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.

Select to compare

Configure now
Starting from^∗ ：	575.41 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide End Mill with 2 Flutes for Resin Processing PSE-2

KYOWA SEIKO

[Features]
An end mill with medium cutting edge length for machining plastics, 2 cutting edges.
This product can be used alone for edge milling a workpiece due to its square shape.
[Features]
Suitable for plate milling, side milling, slot milling, plunging (Z-feed), ramp milling and facing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide End Mill for Rib for Resin Processing PRE-2

KYOWA SEIKO

Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.27 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC

KYOWA SEIKO

[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking

Select to compare

Configure now
Starting from^∗ ：	70.68 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	UNION TOOL	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO
Product Series	2-Flute, Stub Shape, FX-MG-EDSS	2-Flute, Stub Shape (Gut Mill) WX-G-EDSS	2-Flute, Medium, MG-EDN	2-Flute, Miniature, Short, MG-EDS-3	2-Flute, Long FX-MG-EDL	2-Flute, Long MG-EDL	2-Flute, for Steel / Aluminum Alloy / Plus Check (HSK Compatible) CRN-HS-EDS	2-Flute, Miniature Short for Steel / Aluminum Alloy / Plus Check	2-Flute, Long for Steel / Aluminum Alloy / Plus Check, CRN-EDL-4	2-Flute, for Steel / Aluminum Alloy, Short, CA-RG-EDS	3-Flute, Short, DLC-ETS	3-Flute, for Slotting, Stub Shape, WX-SHTSS	3-Flute, for Steel / Aluminum Alloy, Short, CA-ETS	Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE	CBN End Mill, 1-Flute, Short, MBOS	For Graphite, 2-Flute, Regular Type, GF-EDR	For Graphite, 2 Flutes, Long Shank, Regular Type, GF-LS-EDR	For Graphite, 2 Flutes, Long Type, GF-EDL	Diamond End Mills 1-Flute Short Type MDOS	High Helix Short Type FX-MG-EHS	2-Flute, Long Neck, Short, DLC-LN-EDS	2-Flute, Long Neck, Short, FX-LN-EDS-6	2-Flute, Long Neck, Short (Deep Rib) WX-LN-EDS	2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS	HMS, HM Coated 3-6 Flute Square	AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)	AL-3LS Long Shank End Mill for Aluminum (Under-Shank)	MSE345 MUGEN-COATING 3-Flute End Mill	MSZ345 MUGEN-COATING POWER "Z" End Mill	DLC-AZS DLC Coated, 3-Flute Long Neck Square	3-Flute Super One-Cut End Mill DV-SOCS3	DZ-COAT Solid End Mill, DZ-DES2-L Type	DZ-COAT Solid End Mill, DZ-DES2-S Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type	Spiral Cut End Mill SPC Type	Solid End Mill LS-OCFS2 Type	Solid End Mill OCFS2-L Type	Solid End Mill OCFS2-M Type	Solid End Mill OCFS2-S Type	Solid End Mill OCFS4-L Type	Solid End Mill OCFS4-S Type	PCD 2-Flute Spiral Square End Mill DSE-2	Carbide End Mill with 2 Flutes for Resin Processing PSE-2	Carbide End Mill for Rib for Resin Processing PRE-2	Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
Starting from^∗	61.38 € *Unit price with basic configuration	82.80 € *Unit price with basic configuration Volume Discount	53.61 € *Unit price with basic configuration	37.76 € *Unit price with basic configuration Volume Discount	126.10 € *Unit price with basic configuration Volume Discount	181.52 € *Unit price with basic configuration	61.87 € *Unit price with basic configuration Volume Discount	46.68 € *Unit price with basic configuration	60.65 € *Unit price with basic configuration	52.70 € *Unit price with basic configuration Volume Discount	62.31 € *Unit price with basic configuration	49.08 € *Unit price with basic configuration Volume Discount	42.71 € *Unit price with basic configuration Volume Discount	100.21 € *Unit price with basic configuration	150.58 € *Unit price with basic configuration	88.82 € *Unit price with basic configuration	105.13 € *Unit price with basic configuration	111.14 € *Unit price with basic configuration	263.25 € *Unit price with basic configuration	86.80 € *Unit price with basic configuration Volume Discount	62.96 € *Unit price with basic configuration	65.64 € *Unit price with basic configuration	34.27 € *Unit price with basic configuration Volume Discount	62.97 € *Unit price with basic configuration	58.10 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	45.91 € *Unit price with basic configuration Volume Discount	93.85 € *Unit price with basic configuration Volume Discount	64.99 € *Unit price with basic configuration Volume Discount	58.31 € *Unit price with basic configuration Volume Discount	55.36 € *Unit price with basic configuration Volume Discount	263.06 € *Unit price with basic configuration Volume Discount	86.49 € *Unit price with basic configuration Volume Discount	75.30 € *Unit price with basic configuration Volume Discount	79.44 € *Unit price with basic configuration	264.58 € *Unit price with basic configuration Volume Discount	119.43 € *Unit price with basic configuration Volume Discount	105.59 € *Unit price with basic configuration Volume Discount	88.08 € *Unit price with basic configuration Volume Discount	59.65 € *Unit price with basic configuration Volume Discount	111.29 € *Unit price with basic configuration Volume Discount	86.01 € *Unit price with basic configuration Volume Discount	575.41 € *Unit price with basic configuration	52.69 € *Unit price with basic configuration Volume Discount	63.27 € *Unit price with basic configuration Volume Discount	70.68 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	8 Days	6 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days
Blade diameter (D)(φ)	3 ～ 16	5.5	3.5 ～ 5	0.2 ～ 2	7 ～ 11	13 ～ 25	1 ～ 12	0.5 ～ 3	1 ～ 3	2 ～ 10	5 ～ 12	3 ～ 12	3 ～ 8	10 ～ 12	6 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	6 ～ 12	3	0.5 ～ 6	0.5 ～ 2.5	0.1 ～ 6	0.5 ～ 12	1 ～ 3	1 ～ 12	5 ～ 12	3 ～ 12	1 ～ 12	1 ～ 12	16 ～ 20	0.2 ～ 3	0.2 ～ 6	5	15 ～ 38	2 ～ 30	3 ～ 25	1 ～ 3	1 ～ 30	3 ～ 25	3 ～ 30	0.2 ～ 6	0.2 ～ 6	0.3 ～ 5	1 ～ 16
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Cast Iron[○]	Graphite[◎]	Graphite[◎]	Graphite[◎]	Aluminum[◎] / Graphite[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	Aluminum[◎]	Aluminum[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[◎] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Aluminum[◎] / Copper[◎] / Graphite[◎]	Aluminum[◎] / Resin[◎]	Aluminum[◎] / Resin[◎]	Aluminum[◎] / Copper[◎]
Blade length (ℓ)(mm)	4.5 ～ 24	8.3	12 ～ 17	0.6 ～ 6	24 ～ 34	40 ～ 67	1.5 ～ 18	1.5 ～ 8	4 ～ 15	6 ～ 22	13 ～ 26	4.5 ～ 18	8 ～ 19	15 ～ 18	3 ～ 6	10 ～ 65	10 ～ 65	20 ～ 130	7 ～ 13	8	0.7 ～ 9	0.7 ～ 3.7	0.15 ～ 9	0.7 ～ 18	2.5 ～ 15	3 ～ 36	7.5 ～ 18	8 ～ 30	1.5 ～ 26	2 ～ 24	32 ～ 38	1.5 ～ 30	0.4 ～ 15	8	26 ～ 55	10 ～ 80	20 ～ 80	3 ～ 9	3 ～ 60	20 ～ 80	10 ～ 60	0.2 ～ 3	0.6 ～ 21	0.6 ～ 10	2 ～ 32
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	3	3	3	3	1	2	2	2	1	3	2	2	2	2	3	2	3	3	3	3	3	2	2	3	4 ～ 6	2	2	2	2	4	4	2	2	2	2
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square	Square	Square	Square	Square	Long-Neck Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Coating	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN	Non-Coated	CrN	CrN	CrN	Non-Coated	DLC	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	DLC	TiAlN	TiAlN	CrN	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiAlN	DLC	-	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	DLC
Shank diameter (d)(mm)	6 ～ 16	6	6	3	8 ～ 12	12 ～ 25	6 ～ 12	3	4	4 ～ 10	6 ～ 12	6 ～ 12	6 ～ 8	8 ～ 10	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	6	6	6	4 ～ 6	6 ～ 12	4 ～ 6	4 ～ 12	4 ～ 10	6 ～ 12	4 ～ 12	4 ～ 12	16 ～ 20	3 ～ 4	3 ～ 6	6	16 ～ 32	4 ～ 32	6 ～ 25	3	6 ～ 32	6 ～ 25	6 ～ 32	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 16
Overall Length (L)(mm)	50 ～ 100	50	50 ～ 60	40	70 ～ 90	100 ～ 140	50 ～ 80	40	45 ～ 50	40 ～ 70	50 ～ 75	50 ～ 75	50 ～ 60	130 ～ 150	50 ～ 75	75 ～ 130	100 ～ 200	100 ～ 200	50 ～ 75	50	60 ～ 90	60	45 ～ 120	60 ～ 140	45 ～ 60	45 ～ 90	80 ～ 150	50 ～ 80	45 ～ 80	60 ～ 110	110 ～ 125	40 ～ 70	40 ～ 60	55	84 ～ 123	140 ～ 250	60 ～ 150	38	45 ～ 130	60 ～ 150	45 ～ 130	50 ～ 60	45 ～ 100	45 ～ 100	45 ～ 100
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	2.5 ～ 30	-	-	-	-	-	-	-	12 ～ 24	20 ～ 85	25 ～ 130	25 ～ 80	12 ～ 24	-	2.5 ～ 30	2.5 ～ 12.5	0.3 ～ 60	2.5 ～ 60	-	-	-	-	-	3 ～ 36	-	-	-	-	-	40 ～ 125	-	-	-	-	-	-	-	-	-
Machining Application	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)
Blade tip shape	Sharp Edge	With Lead	Sharp Edge	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	C plane	Sharp Edge	C plane	Sharp Edge	C plane	C plane	C plane	-	Sharp Edge	Sharp Edge	-
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	No torsion	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	No torsion	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.775
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6H
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8H
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10H
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12H
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.875
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.4
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.96
  - 3
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
  - 3.96
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.3688
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.78
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.5626
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9502
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.5438
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.9502
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.1186
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.52
  - 9.525
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.3124
  - 10.4
  - 10.49
  - 10.5
  - 10.6
  - 10.7
  - 10.7188
  - 10.8
  - 10.9
- 11～11.9126
  - 11
  - 11.0998
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.5062
  - 11.6
  - 11.7
  - 11.8
  - 11.9
  - 11.9126
- 12
- 12～12.9
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.8938
  - 13
  - 13.1
  - 13.2
  - 13.4
  - 13.4874
  - 13.5
  - 13.6
  - 13.8
  - 13.8938
- 14～14.8
  - 14
  - 14.1
  - 14.2
  - 14.2748
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.875
  - 15.88
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.4498
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.2626
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.05
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.4
  - 20.5
  - 20.6
  - 20.6502
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.4376
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.225
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.4
  - 23.4188
  - 23.5
  - 23.6
  - 23.7998
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.1874
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.0002
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7876
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.575
  - 28.8
- 29～29.8
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
  - 29.8
- 30～30.9626
  - 30
  - 30.1752
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
  - 30.9626
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.75
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.3502
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.8
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
- 36～36.8
  - 36
  - 36.4
  - 36.4998
  - 36.5
  - 36.8
- 37～37.6936
  - 37
  - 37.2
  - 37.5
  - 37.6
  - 37.6936
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.7002
  - 39
  - 39.2
  - 39.5
  - 39.6
  - 39.7002
- 40～40.8
  - 40
  - 40.4
  - 40.4876
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.28
  - 41.5
  - 41.6
- 42～42.8498
  - 42
  - 42.4
  - 42.5
  - 42.8
  - 42.8498
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.4312
  - 46.5
  - 46.8
- 47～47.8
  - 47
  - 47.2
  - 47.5
  - 47.6
  - 47.8
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.2252
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.1876
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57～57.5
  - 57
  - 57.15
  - 57.5
- 58～58.7502
  - 58
  - 58.5
  - 58.7502
- 59～59.5376
  - 59
  - 59.5
  - 59.5376
- 60～60.5
  - 60
  - 60.5
- 62
- 63～63.5
  - 63
  - 63.5
- 64
- 65
- 66
- 67
- 70～70.5
  - 70
  - 70.5
- 72
- 75
- 76
- 77.95
- 80
- 83
- 85
- 90
- 100
- 103
- 110
- 115
- 120
- 125
- 130
- 150
- 200
[5-75/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

Outer Diameter 6/Bottom Blade 3

8

Outer Diameter 8/Bottom Blade 4

10

Outer Diameter 10/Bottom Blade 5

12

14

Outer Diameter 14/Bottom Blade 7

16

Outer Diameter 16/Bottom Blade 8

Bur End
Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Shank diameter (d)(mm)
1

1.5

2

2.9

3

3.17

3.175

3.8

4

4.75

4.8

5

5.8

6

6.35

6.8

7

7.8

8

9

9.53

9.7

9.8

10

11

11.7

12

12.7

13

14

15

15.5

15.7

15.88

16

17

18

19.05

19.3

19.7

20

24.2

25

25.4

30

32

42
Drawing

Clear

Overall Length (L)(mm)
30

35

36

37

38

38.1

39

40

41

42

43

45

48

49

50

50.8

51

52

53

54

55

57

58

60

62

63

63.5

64

65

66

67

68

69

70

72

73

74

75

76

76.2

79

80

82

83

84

85

86

87

88

88.9

89

90

92

93

94

95

97

99

100

101.6

104

105

107

108

109

110

111

112

115

118

120

121

123

124

125

126

127

128

130

135

140

145

150

152.4

153

155

156

160

165

170

177.8

180

185

190

200

210

215

220

225

230

240

250

260

265

270

280

300

310

320

350

800
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11.25
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15～15.75
  - 15
  - 15.75
- 16～16.5
  - 16
  - 16.5
- 17.5
- 18
- 19～19.6
  - 19
  - 19.6
- 20
- 21
- 22
- 23
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35～35.3
  - 35
  - 35.3
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 58
- 60
- 62
- 63
- 64
- 65
- 66
- 67
- 70
- 74
- 75
- 76
- 79
- 80
- 85
- 94
- 99
- 100
- 108
- 120
- 125
- 130
- 140
- 150
- 200
[10-112/1mm Unit(s)]

Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Variable lead
Drawing

Clear

Brand

- MISUMI (19)
- Cost Efficient Products ()
- OSG (38)
- KYOWA SEIKO (15)
- DIJET (11)
- SPEED TIGER (6)
- NACHI(FUJIKOSHI) (5)
- NS TOOL (5)
- UNION TOOL (3)
- WIDIN (3)
- GCT (2)
- GUHRING (1)
- EIKOSHA (0)
- PROCHI (0)
- SANKO MFG (0)
- ATOM (0)
- SANDVIK (0)
- TAIYO-TOOL (0)
- TOYO DRILL (0)
- OKAZAKI SEIKO (0)
- THE CUT (0)
- 7 LEADERS (0)
- VAN_HOORN (0)
- KYOCERA (0)
- ASAHI TOOLS (0)
Clear