Multi-Function Square End Mills (Carbide)（work material：Stainless Steel）

?* Information on days to ship and prices

• 

  High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

  GUHRING

  [Features]
  · A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
  · Furthermore, all of these processes can be done at high speed and high feed rate.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	78.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  
  -Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
  -The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
  -The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
  It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	61.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	22.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	23.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps
  -The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool
  -Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
  -Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast
  -The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angle
  It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
  -The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
  -It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]
  -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -Adopting the 3-flank shape, it is resistant to chatter,
  -The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
  -This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
  -Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
  It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
  -The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
  -Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
  -The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]
  -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
  -Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
  -it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  -High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
  -The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
  -The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	77.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -The unique shape of the chip groove enables grooves to be cut with a depth of cut equivalent to that of a 2-blade tool
  -By adopting a stitch groove length 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
  -Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose cutter with 30° helix angle
  -it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating characteristics
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
  -The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
  -Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
  -it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

  MISUMI

  [Features]
  -The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
  -This product has an average flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (normal flute length), hence it is called "SR flute length". "
  -Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high-speed machining compared to general-purpose end mills with 30° helix angle
  It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

  MISUMI

  [Features]
  -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
  -Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
  -it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

  MISUMI

  [Features]
  -The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
  -Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
  -The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
  -it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

  MISUMI

  Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	75.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

  MISUMI

  Ideal for the standing-wall finish of stainless steel

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • R (Regular)

  Select to compare

  Configure now
  Starting from∗ ：	105.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	42.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
  · Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
  · 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	48.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.38 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]
  -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
  -Suppresses chattering with uneven pitch and uneven flutes
  -Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are used
  -Stable machining is possible while maintaining the accuracy of the finished surface
  -Coating with excellent lubricity provides stable abrasion resistance and improves the shape accuracy of the workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]
  -The chatter is suppressed by uneven pitches and uneven flutes. Stable machining with consistent surface accuracy is possible
  -It uses an ultra-fine grain carbide base material. The coating with excellent adhesion and heat resistance enables machining under high-speed conditions
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	51.65 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	99.24 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The reverse step design eliminates shank interference when performing mold pocket processing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	121.05 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

  OKAZAKI SEIKO

  A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

  OKAZAKI SEIKO

  It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.15 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  3-Flute Super One-Cut End Mill DV-SOCS3

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	263.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Solid End Mill SEM4 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Select to compare

  Configure now
  Starting from∗ ：	18.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Center V End Mill KSV-2

  KYOWA SEIKO

  Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	83.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Center V End Mill KSVA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 cutting edges, suitable for general steel, stainless steel and other workpieces.
  The high cutting speed and high production efficiency lead to a reduction in overall production cost.
  [Features]
  V-groove milling, chamfering, side milling, etc. can be performed with this product alone.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	107.74 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Carbide Center V End Mill (with Rounded Tip) KSVRA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 cutting edges, suitable for general steel, stainless steel and other workpieces.
  The R-shaped tip can be used for 3D machining and filleting.
  The high cutting speed and high production efficiency lead to a reduction in overall production costs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	107.74 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  CoroMill Plura HD, Carbide Solid End Mill (with Square Center-Cut Oil Hole)

  SANDVIK

  [Features]
  · Internal lubrication gives good chip discharge properties.
  · Twice the cutting depth that was conventionally possible
  · Ideal for everything from shoulder cutting to full grooving.
  · With reinforced edge lines, assures long product life even with intense machining.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	260.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA

  OKAZAKI SEIKO

  [Features]
  · Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	87.61 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SANDVIK CoroMill Plura Solid Carbide End Mill for Turn Milling

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	65.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...