Multi-Function Square End Mills (Carbide)（Blade tip shape：Sharp Edge）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	109.72 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	85.50 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.86 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)

-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	64.71 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	132.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	7 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, delivery times, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

MISUMI

[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.71 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

A long shank type, it also features neck relief, enabling deep engraving operation.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.86 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

Long high helical endmill for aluminum, 3-flute, pure DLC coating

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.13 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE3 High-Helix End Mill, 3-Flute, Non-Coated

OKAZAKI SEIKO

3-flute type with high-torsion grooves enables everything from rough machining to finishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4 High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

OKAZAKI SEIKO

End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.65 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

OKAZAKI SEIKO

The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	99.24 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

[Features]
Slim carbide end mill with 4 cutting edges.
Resists chipping and can be used in a wide range of applications, from general steel to stainless steel.
The slim shank design allows flexible adjustment of projection length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.09 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

OKAZAKI SEIKO

The reverse step design eliminates shank interference when performing mold pocket processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	121.05 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

OKAZAKI SEIKO

A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

OKAZAKI SEIKO

It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

3-Flute Super One-Cut End Mill DV-SOCS3

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	263.06 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Middle Shank) (Under Neck) AL-SEE-MS2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.00 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	112.98 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.33 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	79.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	138.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid End Mill SEM4 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	18.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare
Brand	DIJET	OKAZAKI SEIKO	OKAZAKI SEIKO	MISUMI	DIJET	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET
Product Series	Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated	SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated	SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	3-Flute Super One-Cut End Mill DV-SOCS3	Solid End Mill for Aluminum Machining (Middle Shank) (Under Neck) AL-SEE-MS2 Type	Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type	Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type	Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)	Solid End Mill SEM4 Type
Starting from^∗	109.72 € *Unit price with basic configuration Volume Discount	85.50 € *Unit price with basic configuration Volume Discount	73.86 € *Unit price with basic configuration Volume Discount	64.71 € *Unit price with basic configuration Volume Discount	132.25 € *Unit price with basic configuration	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	52.71 € *Unit price with basic configuration Volume Discount	73.86 € *Unit price with basic configuration Volume Discount	115.13 € *Unit price with basic configuration Volume Discount	47.42 € *Unit price with basic configuration Volume Discount	47.42 € *Unit price with basic configuration Volume Discount	51.65 € *Unit price with basic configuration Volume Discount	99.24 € *Unit price with basic configuration Volume Discount	78.09 € *Unit price with basic configuration Volume Discount	121.05 € *Unit price with basic configuration Volume Discount	24.15 € *Unit price with basic configuration Volume Discount	24.15 € *Unit price with basic configuration Volume Discount	263.06 € *Unit price with basic configuration Volume Discount	181.00 € *Unit price with basic configuration Volume Discount	112.98 € *Unit price with basic configuration Volume Discount	50.33 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	79.44 € *Unit price with basic configuration	138.82 € *Unit price with basic configuration	18.74 € *Unit price with basic configuration
Min. Shipping Days	8 Days	8 Days	7 Days	5 Days	6 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	8 Days	10 Days	10 Days	10 Days	10 Days	10 Days	10 Days	10 Days	10 Days	6 Days	7 Days	8 Days	8 Days	8 Days	Same day	6 Days	6 Days	6 Days
Specifications				TS General Steel 4 Flutes S (Short)		TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes L (Long)
Blade diameter (D)(φ)	1 ～ 19	3 ～ 20	3 ～ 20	2 ～ 22	7 ～ 10	1 ～ 20	6 ～ 16	1 ～ 20	1 ～ 20	1 ～ 20	2 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20	5 ～ 22	7 ～ 22	3 ～ 20	3 ～ 25	16 ～ 20	2 ～ 20	3 ～ 20	0.4 ～ 19	5	10 ～ 12	2
work material	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]
Blade length (ℓ)(mm)	4.5 ～ 75	10 ～ 45	15 ～ 80	3.5 ～ 30	10 ～ 15	3 ～ 38	5 ～ 40	4 ～ 56	3 ～ 38	4 ～ 56	5 ～ 75	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 50	10 ～ 45	15 ～ 80	8 ～ 32	12 ～ 32	10 ～ 45	10 ～ 50	32 ～ 38	20 ～ 70	16 ～ 60	0.8 ～ 45	8	15 ～ 18	6.5
Number of flutes(sheet)	2	3	4	4	3	3	3	3	4	4	4	3	3	3	3	4	4	4	4	4	3	4	3	2	2	2	3	4	4
Type	Square	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square
Coating	Non-Coated	DLC	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	DLC	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN
Shank diameter (d)(mm)	3 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6.8 ～ 9.8	4 ～ 20	6 ～ 16	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	16 ～ 20	4 ～ 20	6 ～ 20	3 ～ 20	6	9 ～ 11	4
Overall Length (L)(mm)	45 ～ 150	45 ～ 105	70 ～ 150	80 ～ 200	100 ～ 130	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 110	60 ～ 130	60 ～ 150	45 ～ 105	70 ～ 800	70 ～ 800	45 ～ 105	45 ～ 120	45 ～ 105	70 ～ 150	70 ～ 150	80 ～ 150	45 ～ 105	45 ～ 120	110 ～ 125	140 ～ 220	60 ～ 130	40 ～ 115	55	150 ～ 160	40
Underneck length (ℓ1)(mm)	-	-	-	30 ～ 140	-	18 ～ 73	22 ～ 78	26 ～ 92	18 ～ 70	26 ～ 92	30 ～ 110	-	15 ～ 80	15 ～ 80	-	-	-	-	-	-	-	-	-	50 ～ 140	-	-	-	-	-
Machining Application	Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Inclined Cuts	Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Side / Groove / Plunging (Z feed)	Side	Side / Groove	Side / Groove	Side / Groove / Plunging (Z feed)	Side	Side / Groove
Blade tip shape	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Torsion Angle (θ)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.4～0.95
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13～13.7
  - 13
  - 13.7
- 14
- 15～15.6
  - 15
  - 15.6
- 16
- 17
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 22
- 25
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.8～0.9
  - 0.8
  - 0.9
- 1～1.7
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
- 2～2.8
  - 2
  - 2.25
  - 2.3
  - 2.5
  - 2.8
- 3～3.8
  - 3
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.4
  - 4.5
- 5～5.9
  - 5
  - 5.4
  - 5.9
- 6～6.8
  - 6
  - 6.3
  - 6.5
  - 6.8
- 7～7.7
  - 7
  - 7.2
  - 7.5
  - 7.7
- 8～8.6
  - 8
  - 8.1
  - 8.6
- 9～9.9
  - 9
  - 9.5
  - 9.9
- 10～10.8
  - 10
  - 10.4
  - 10.5
  - 10.8
- 11～11.7
  - 11
  - 11.3
  - 11.7
- 12
- 12～12.6
  - 12.2
  - 12.5
  - 12.6
- 13～13.5
  - 13
  - 13.1
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22～22.5
  - 22
  - 22.5
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 38
- 40
- 42
- 45
- 46
- 48
- 50
- 53
- 55
- 56
- 57
- 60
- 64
- 65
- 66
- 70
- 75
- 76
- 80
[5-75/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
2

3

4

6
Clear

Type
- Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- DLC
- Non-Coated
Details

Clear

Shank diameter (d)(mm)
3

4

6

6.8

8

9

9.8

10

11

12

14

16

18

20

25
Drawing

Clear

Overall Length (L)(mm)
35

37

38

40

41

42

45

49

50

53

54

55

57

58

60

63

65

66

70

72

73

75

80

82

83

84

90

92

95

100

104

105

110

115

120

125

130

135

140

150

160

180

200

220

800
Drawing

Clear

Underneck length (ℓ1)(mm)
- 9
- 11.25
- 13.5
- 15～15.75
  - 15
  - 15.75
- 16
- 18
- 19.6
- 20
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 35～35.3
  - 35
  - 35.3
- 36
- 41
- 42
- 45
- 50
- 51
- 52
- 64
- 65
- 70
- 80
- 85
- 100
- 108
- 120
- 140
[18-110/1mm Unit(s)]

Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Torsion Angle (θ)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Variable lead
Drawing

Clear

Brand

- MISUMI (7)
- Cost Efficient Products ()
- OKAZAKI SEIKO (13)
- DIJET (9)
- GUHRING (0)
- OSG (0)
- SANDVIK (0)
- KYOWA SEIKO (0)
- 7 LEADERS (0)
Clear

CAD data type

- 2D
- 3D
Clear

Multi-Function Square End Mills (Carbide)（Blade tip shape：Sharp Edge）

Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

SEE3 High-Helix End Mill, 3-Flute, Non-Coated

SEE4 High-Helix End Mill, 4-Flute, Non-Coated

SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

3-Flute Super One-Cut End Mill DV-SOCS3

Solid End Mill for Aluminum Machining (Middle Shank) (Under Neck) AL-SEE-MS2 Type

Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type

Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type

Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type

Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

Solid End Mill SEM4 Type

Categories related to Multi-Function Square End Mills (Carbide)

Método de pago

Fabricación bajo demanda

Cambiar de vista

Certificados

MISUMI en todo el mundo

Redes sociales

Nota Legal