Multi-Function Square End Mills (Carbide)（Coating：For High Hardness (Silicon Group)）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)

-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	61.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool
-Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast
-The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
-The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	77.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables grooves to be cut with a depth of cut equivalent to that of a 2-blade tool
-By adopting a stitch groove length 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose cutter with 30° helix angle
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

MISUMI

[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-This product has an average flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (normal flute length), hence it is called "SR flute length". "
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose end mills with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

MISUMI

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

MISUMI

[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

MISUMI

Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

Volume Discount

TS
SUS
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	75.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

MISUMI

Ideal for the standing-wall finish of stainless steel

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	105.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

MISUMI

MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	42.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

OKAZAKI SEIKO

End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.65 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO
Product Series	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated
Starting from^∗	61.53 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	77.95 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	75.33 € *Unit price with basic configuration Volume Discount	105.15 € *Unit price with basic configuration Volume Discount	42.42 € *Unit price with basic configuration Volume Discount	48.45 € *Unit price with basic configuration Volume Discount	51.65 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	10 Days
Specifications	TS General Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes L (Long)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	2 ～ 22	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	3 ～ 16	3 ～ 12	3 ～ 12	2 ～ 12	3 ～ 20
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]
Blade length (ℓ)(mm)	3.5 ～ 30	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	3.5 ～ 30	1.5 ～ 24	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	7 ～ 35	10.5 ～ 38	8 ～ 26	6 ～ 38	10 ～ 45
Number of flutes(sheet)	4	3	3	3	3	3	3	4	4	4	4	4	3	3	4	4	4
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Shank diameter (d)(mm)	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20
Overall Length (L)(mm)	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	80 ～ 200	60 ～ 110	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 105	60 ～ 100	60 ～ 100	60 ～ 100	45 ～ 105
Underneck length (ℓ1)(mm)	30 ～ 140	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	30 ～ 140	14 ～ 74	18 ～ 72	22 ～ 78	26 ～ 92	30 ～ 112	-	-	-	-	-
Machining Application	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking
Blade tip shape	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	C plane	C plane	With Lead	With Lead	Sharp Edge
Torsion Angle (θ)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)

Filter by:

Blade diameter (D)(φ)
- 0.4～0.95
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13～13.7
  - 13
  - 13.7
- 14
- 15～15.6
  - 15
  - 15.6
- 16
- 17
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.8～0.9
  - 0.8
  - 0.9
- 1～1.7
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
- 2～2.8
  - 2
  - 2.25
  - 2.3
  - 2.5
  - 2.8
- 3～3.8
  - 3
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.4
  - 4.5
- 5～5.9
  - 5
  - 5.4
  - 5.9
- 6～6.8
  - 6
  - 6.3
  - 6.5
  - 6.8
- 7～7.7
  - 7
  - 7.2
  - 7.5
  - 7.7
- 8～8.6
  - 8
  - 8.1
  - 8.6
- 9～9.9
  - 9
  - 9.5
  - 9.9
- 10～10.8
  - 10
  - 10.4
  - 10.5
  - 10.8
- 11～11.7
  - 11
  - 11.3
  - 11.7
- 12
- 12～12.6
  - 12.2
  - 12.5
  - 12.6
- 13～13.5
  - 13
  - 13.1
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22～22.5
  - 22
  - 22.5
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 64
- 65
- 66
- 70
- 75
- 76
- 80
- 85
- 100
[5-75/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6
Clear

Type
- Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- DLC
- Non-Coated
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

18

20

25

32
Drawing

Clear

Overall Length (L)(mm)
35

37

38

40

41

42

45

49

50

53

54

55

57

58

60

63

64

65

66

70

72

73

75

80

82

83

84

85

90

92

95

100

104

105

110

115

120

121

125

130

135

140

150

155

160

180

200

220

800
Drawing

Clear

Underneck length (ℓ1)(mm)
- 9
- 11.25
- 13.5
- 15～15.75
  - 15
  - 15.75
- 16
- 18
- 19.6
- 20
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 35～35.3
  - 35
  - 35.3
- 36
- 41
- 42
- 45
- 50
- 51
- 52
- 64
- 65
- 70
- 80
- 85
- 100
- 108
- 120
- 140
[14-112/1mm Unit(s)]

Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Torsion Angle (θ)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Variable lead
Drawing

Clear

Brand

- MISUMI (16)
- Cost Efficient Products ()
- OKAZAKI SEIKO (1)
- GUHRING (0)
- DIJET (0)
- OSG (0)
- SANKO MFG (0)
- KYOWA SEIKO (0)
- SANDVIK (0)
- 7 LEADERS (0)
Clear

CAD data type

- 2D
- 3D
Clear

Multi-Function Square End Mills (Carbide)（Coating：For High Hardness (Silicon Group)）

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type

SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

Categories related to Multi-Function Square End Mills (Carbide)

Método de pago

Fabricación bajo demanda

Cambiar de vista

Certificados

MISUMI en todo el mundo

Redes sociales

Nota Legal