Roughing End Mills (Carbide)（Torsion Angle (θ)：Weak torsion (15˚ to 25˚)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes- Volume Discount
- TiAlN
- General Steel
- R (Regular)
Configure nowStarting from∗ ： 63.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide roughing end mill, fine pitch / short model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / regular model
MISUMI
[Features]
Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / long model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / long regular model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
SCT S Cut End Mill MX30
ASAHI TOOLS
JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.- Volume Discount
Configure nowStarting from∗ ： 440.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SCT Long S-Cut End Mill MX30
ASAHI TOOLS
JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.- Volume Discount
Configure nowStarting from∗ ： 533.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
OKAZAKI SEIKO
Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.- Volume Discount
Configure nowStarting from∗ ： 74.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
One Cut Rough DZ-OCRS
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.- Volume Discount
Configure nowStarting from∗ ： 191.37 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Roughing End Mill Regular 4-Flute for High Hardness Steel 3682
GUHRING
Capable of rough machining of hardened materials up to hardness of 56 HRC.- Volume Discount
Configure nowStarting from∗ ： 134.54 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)
KYOCERA
For rough machining, the repertoire includes 3, 4 and 5 cutting edges.
The sinusoidal cutting edge reduces the cutting force.- Volume Discount
Configure nowStarting from∗ ： 107.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 90.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Fiber Cutter with End Cutting Edge with / without Coating CSFRPE
EIKOSHA
- Volume Discount
Configure nowStarting from∗ ： 93.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI SEIKO | DIJET | GUHRING | KYOCERA | EIKOSHA | EIKOSHA |
| Product Series | XAC series carbide roughing end mill, fine pitch / regular model | TSC series carbide roughing end mill, fine pitch / short model | TSC series carbide roughing end mill, fine pitch / regular model | TSC series carbide roughing end mill, fine pitch / long model | TSC series carbide roughing end mill, fine pitch / long regular model | Roughing End Mill Regular 4-Flute for High Hardness Steel 3682 | High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium) | Carbide Solid Fiber Cutter with End Cutting Edge with / without Coating CSFRPE | |||||
| Starting from∗ | 63.49 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 440.94 € *Unit price with basic configuration Volume Discount | 533.65 € *Unit price with basic configuration Volume Discount | 74.91 € *Unit price with basic configuration Volume Discount | 191.37 € *Unit price with basic configuration Volume Discount | 134.54 € *Unit price with basic configuration Volume Discount | 107.50 € *Unit price with basic configuration | 90.13 € *Unit price with basic configuration Volume Discount | 93.70 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 8 Days | 24 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
|
|
|
|
| ||||||||
| Blade diameter (D)(φ) | 6 ～ 20 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 5 ～ 20 | 20 ～ 40 | 20 ～ 40 | 5 ～ 25 | 4 ～ 25 | 6 ～ 20 | 5 ～ 8 | 3 ～ 20 | 3 ～ 20 |
| work material | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] | - | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | - | - |
| Blade length (ℓ)(mm) | 16 ～ 38 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 40 ～ 80 | 60 ～ 120 | 12 ～ 45 | 8 ～ 50 | - | 13 ～ 16 | 10 ～ 45 | 10 ～ 45 |
| Number of flutes(sheet) | 3 ～ 4 | 4 | 3 ～ 4 | 4 | 3 ～ 4 | 4 | 4 | 4 | 3 ～ 4 | 4 | 3 | 6 ～ 16 | Outer Diameter 6/Bottom Blade 3 ～ Outer Diameter 16/Bottom Blade 8 |
| Type | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing |
| Coating | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiAlN | TiAlN | - | TiAlN | Non-Coated | Non-Coated |
| Shank diameter (d)(mm) | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 20 ～ 42 | 20 ～ 42 | 4 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 8 | 4 ～ 20 | 4 ～ 20 |
| Overall Length (L)(mm) | 57 ～ 104 | 57 ～ 104 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 130 ～ 180 | 150 ～ 220 | 50 ～ 120 | 55 ～ 130 | 57 ～ 104 | 57 ～ 63 | 50 ～ 110 | 50 ～ 110 |
| Underneck length (ℓ1)(mm) | - | 17 ～ 66 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Side / Groove | Plane / Side / Groove | Side / Groove | - | Plane / Side / Groove | Plane / Side / Countersinking | Plane / Side / Groove / Countersinking |
| Blade tip shape | C plane | Micro R | Micro R | Micro R | Micro R | C plane | C plane | C plane | - | - | - | - | Sharp Edge |
| Torsion Angle (θ) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) |
Loading...
Filter by:
-
Blade diameter (D)(φ)
-
1～1.8
- 1
- 1.5
- 1.8
-
2～2.8
- 2
- 2.5
- 2.8
-
3～3.8
- 3
- 3.175
- 3.5
- 3.8
-
4～4.8
- 4
- 4.5
- 4.75
- 4.775
- 4.8
-
5～5.75
- 5
- 5.5
- 5.75
-
6～6.75
- 6
- 6H
- 6.35
- 6.5
- 6.75
-
7～7.75
- 7
- 7.5
- 7.75
-
8～8H
- 8
- 8H
-
9～9.7
- 9
- 9.525
- 9.7
-
10～10H
- 10
- 10H
-
11～11.7
- 11
- 11.7
-
12～12.7
- 12
- 12H
- 12.7
-
13～13.7
- 13
- 13.7
-
14
-
15～15.875
- 15
- 15.7
- 15.875
-
16
-
17～17.7
- 17
- 17.7
-
18
-
19～19.7
- 19
- 19.05
- 19.7
-
20
-
22
-
24
-
25～25.4
- 25
- 25.4
-
30
-
35
-
40
-
-
work material
-
Blade length (ℓ)(mm)
-
3
-
4～4.5
- 4
- 4.3688
- 4.5
-
5～5.5626
- 5
- 5.5626
-
6～6.35
- 6
- 6.35
-
7～7.9502
- 7
- 7.5438
- 7.9502
-
8
-
9～9.525
- 9
- 9.1186
- 9.525
-
10～10.7188
- 10
- 10.3124
- 10.5
- 10.7188
-
11～11.9126
- 11
- 11.0998
- 11.5
- 11.5062
- 11.9126
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.8938
- 13
- 13.4874
- 13.5
- 13.8938
-
14～14.5
- 14
- 14.2748
- 14.5
-
15～15.88
- 15
- 15.875
- 15.88
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.4498
- 17.5
-
18～18.5
- 18
- 18.2626
- 18.5
-
19～19.5
- 19
- 19.05
- 19.5
-
20～20.6502
- 20
- 20.5
- 20.6502
-
21～21.4376
- 21
- 21.4376
-
22～22.5
- 22
- 22.225
- 22.5
-
23～23.7998
- 23
- 23.4188
- 23.7998
-
24
-
25～25.4
- 25
- 25.4
-
26～26.5
- 26
- 26.1874
- 26.5
-
27～27.7876
- 27
- 27.0002
- 27.5
- 27.7876
-
28～28.575
- 28
- 28.575
-
30～30.9626
- 30
- 30.1752
- 30.9626
-
31～31.75
- 31
- 31.75
-
32～32.5
- 32
- 32.5
-
33～33.3502
- 33
- 33.3502
-
34
-
35
-
36～36.5
- 36
- 36.4998
- 36.5
-
37～37.6936
- 37
- 37.6936
-
38
-
39.7002
-
40～40.4876
- 40
- 40.4876
-
41.28
-
42～42.8498
- 42
- 42.8498
-
44
-
45
-
46～46.4312
- 46
- 46.4312
-
47
-
48
-
49.2252
-
50～50.8
- 50
- 50.8
-
51
-
52
-
53.1876
-
54
-
55
-
56
-
57.15
-
58.7502
-
59.5376
-
60
-
62
-
63.5
-
64
-
65
-
67
-
70
-
72
-
75
-
77.95
-
78
-
80
-
82
-
90
-
100
-
120
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- ASAHI TOOLS (2)
- EIKOSHA (2)
- DIJET (1)
- GUHRING (1)
- KYOCERA (1)
- OKAZAKI SEIKO (1)
- SANKO MFG (0)
- SPEED TIGER (0)
- SANDVIK (0)
- OSG (0)
- NACHI(FUJIKOSHI) (0)
- THE CUT (0)
CAD data type
-
- 2D
- 3D
Categories related to Roughing End Mills (Carbide)
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.