Long Neck Square End Mills (Carbide)（Machining Application：Inclined Cuts Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
DLC-AZS DLC Coated, 3-Flute Long Neck Square
UNION TOOL
[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· The DLC coating provides outstanding wear resistance and resistance to weld adhesion
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat land
· O.D. Tolerance: 0/-0.015 (D ≤ 6), 0/-0.005 (D ≥ 8)- Volume Discount
Configure nowStarting from∗ ： 55.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
UT Coat, 4-Flute Long Neck Square CXS
UNION TOOL
[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistanceConfigure nowStarting from∗ ： 58.72 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
Infinity coating has been adopted for the original deep rib end mill. Neck relief type suitable for narrow deep processing.- Volume Discount
Configure nowStarting from∗ ： 35.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Long Blade End Mill KSEL-2
KYOWA SEIKO
Carbide long flute end mill, KSEL-2
An end mill with 4 to 12 times the flute length.
Rank angle: Standard helix angle (30 to 44°).- Volume Discount
Configure nowStarting from∗ ： 83.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type)
OSG
[Features]
· The DUARISE coating offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Also, the smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance. The new flute form achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and reduced burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.- Volume Discount
Configure nowStarting from∗ ： 55.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
| |
| Brand | UNION TOOL | UNION TOOL | NS TOOL | KYOWA SEIKO | OSG |
| Product Series | MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing) | AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type) | |||
| Starting from∗ | 55.36 € *Unit price with basic configuration Volume Discount | 58.72 € *Unit price with basic configuration | 35.16 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 83.36 € *Unit price with basic configuration Volume Discount | 55.30 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 7 Days | Same day | 6 Days | 6 Days |
| Blade diameter (D)(φ) | 1 ～ 12 | 1 ～ 12 | 1 ～ 10 | 0.1 ～ 6 | 6 ～ 12 |
| work material | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| Blade length (ℓ)(mm) | 2 ～ 24 | 1.5 ～ 18 | 1.5 ～ 15 | 0.3 ～ 60 | 9 ～ 18 |
| Number of flutes(sheet) | 3 | 4 | 4 | 2 | 4 |
| Type | Long-Neck Square | Long-Neck Square | Long-Neck Square | Square | Long-Neck Square |
| Coating | DLC | - | TiAlN | Non-Coated | - |
| Shank diameter (d)(mm) | 4 ～ 12 | 4 ～ 12 | 4 ～ 10 | 3 ～ 6 | 6 ～ 12 |
| Overall Length (L)(mm) | 60 ～ 110 | 50 ～ 90 | 50 ～ 150 | 40 ～ 100 | 60 ～ 110 |
| Underneck length (ℓ1)(mm) | 3 ～ 36 | 3 ～ 36 | 4 ～ 80 | - | 18 ～ 60 |
| Machining Application | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts |
| Blade tip shape | With Lead | With Lead | With Lead | - | - |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Variable lead |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.1～0.95
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
-
1～1.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
- 9.9
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12
-
14
-
16
-
18
-
20
-
25
-
30
-
32
-
35
-
40
-
45
-
50
-
-
work material
-
Blade length (ℓ)(mm)
-
0.08～0.9
- 0.08
- 0.1
- 0.12
- 0.15
- 0.2
- 0.25
- 0.3
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.8
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
-
3～3.8
- 3
- 3.2
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
-
4～4.8
- 4
- 4.5
- 4.8
-
5～5.5
- 5
- 5.25
- 5.3
- 5.4
- 5.5
-
6～6.25
- 6
- 6.25
-
7～7.5
- 7
- 7.2
- 7.5
-
8
-
9
-
10
-
11
-
12～12.5
- 12
- 12.5
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
24
-
25
-
26
-
30
-
32
-
35
-
36
-
38
-
40
-
45
-
46
-
48
-
50
-
55
-
56
-
60
-
64
-
65
-
70
-
75
-
80
-
85
-
100
-
115
-
125
-
130
-
150
-
-
Number of flutes(sheet)
-
Type
- Square
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- UNION TOOL (21)
- OSG (10)
- NS TOOL (6)
- NACHI(FUJIKOSHI) (3)
- KYOWA SEIKO (1)
- VAN_HOORN (0)
- SPEED TIGER (0)
- OKAZAKI SEIKO (0)
- GUHRING (0)
- WIDIN (0)
CAD data type
-
- 2D
- 3D
Categories related to Long Neck Square End Mills (Carbide)
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.