Carbide Ball End Mills（Machining Application：Engraving）

Search by sub-category

181

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Promotional pricing

HM Coated 2-Flute, Long Neck Ball HSLB

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	28.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Solid Ball End Mill CSBE

EIKOSHA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	103.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

MISUMI

A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

MISUMI

Diamond coated products that exert tremendous durability are available in the industry's lowest price

Volume Discount

DIA
Graphite
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	111.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

MISUMI

High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

Volume Discount

MR
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, DIA-EBD

OSG

Not only is high speed processing of aluminum possible, dry cutting of aluminum is also possible. A dramatic elongation of the life of tool is possible for graphite processing as well.

Select to compare

Configure now
Starting from^∗ ：	112.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End GX-EQD-SF

OSG

Ball end mills having spherical cutting tips developed for shrink fitting.

Select to compare

Configure now
Starting from^∗ ：	142.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

HSB, HM Coated 2-Flute Ball

UNION TOOL

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	37.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide ball end mill, short model

MISUMI

[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

MISUMI

The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating

Volume Discount

DLC
Aluminum
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

2-Flute, Ball End, Miniature, CRN-EBD-3

OSG

A series of bore-end small diameter radius mills with CRN coating to improve lubricity.. Well suited for detail work on copper electrodes and IT components.

Select to compare

Configure now
Starting from^∗ ：	69.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, Miniature, FX-MG-EBD-3

OSG

The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.

Select to compare

Configure now
Starting from^∗ ：	84.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-SXB

OSG

Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the Carbide

Select to compare

Configure now
Starting from^∗ ：	125.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	132.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End FXS-EQD

OSG

Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	121.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

OSG

High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSBH345 3-Flute Ball-End Mill for High-Hardness

NS TOOL

Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

NS TOOL

The tuned Infinity coating sustains high precision machining for a long time

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

UT COAT 2-Flute Long-Neck Ball CSLEB

UNION TOOL

[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.

Select to compare

Configure now
Starting from^∗ ：	45.25 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type

EIKOSHA

Graphite Electrode Processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

WXL-Coated 2-Flute Ball End Type WXL-EBD

OSG

[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Ball End Mill for Rib for Resin Processing PRB-2

KYOWA SEIKO

Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.90 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

TSC series carbide ball end mill (R accuracy ±3μm)

MISUMI

[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	46.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

MISUMI

[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

MISUMI

[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	24.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide ball end mill, 2-flute / short model

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	13.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short model

MISUMI

[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	23.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	45.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, regular model

MISUMI

[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / short model

MISUMI

[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / regular model

MISUMI

[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, short model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 4-flute / regular model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide ball end mill, 2-flute / short model

MISUMI

Highly versatile due to the non-coated specification

Volume Discount

Non-Coated
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

MISUMI

[Features]
-High rigidity, 2 flute type with longitudinal taper
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	34.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

MISUMI

[Features]
-High feed, high rigidity 3-spiral taper shape with taper length
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
3 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck ball end mill, 2-flute / long neck model

MISUMI

[Features]
-Long neck shape suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck ball end mill, 3-flute / long neck model

MISUMI

[Features]
-Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas
-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck ball end mill, 4-flute / long neck model

MISUMI

[Features]
-Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

MISUMI

[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	113.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

MISUMI

The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

Volume Discount

TS
High-Hardness Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

MISUMI

[Features]
The shape with 3 flutes and short flute length prevents chatter and enables high feed machining
The tapered neck effectively suppresses chatter
Machining of high hardness steel up to 65HRC is possible
The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes

Select to compare

Configure now
Starting from^∗ ：	71.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	UNION TOOL	EIKOSHA	MISUMI	MISUMI	MISUMI	OSG	OSG	UNION TOOL	NS TOOL	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	UNION TOOL	EIKOSHA	OSG	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	HM Coated 2-Flute, Long Neck Ball HSLB	Carbide Solid Ball End Mill CSBE	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	2-Flute, Ball End, DIA-EBD	Spherical Ball End GX-EQD-SF	HSB, HM Coated 2-Flute Ball	SSPB220 CBN Super Spiral Ball End Mill	TSC series carbide ball end mill, short model	DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	2-Flute, Ball End, Miniature, CRN-EBD-3	2-Flute, Ball End, Miniature, FX-MG-EBD-3	2-Flute, Ball End, CBN-SXB	2-Flute, Ball End, FX-MG-EBD	For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL	Spherical Ball End FXS-EQD	2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	UT COAT 2-Flute Long-Neck Ball CSLEB	Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type	WXL-Coated 2-Flute Ball End Type WXL-EBD	Carbide Ball End Mill for Rib for Resin Processing PRB-2	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAL series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, 4-flute / regular model	Carbide ball end mill, 2-flute / short model	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 2-flute / long neck model	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
Starting from^∗	28.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	103.57 € *Unit price with basic configuration Volume Discount	- Volume Discount	111.08 € *Unit price with basic configuration Volume Discount	18.61 € *Unit price with basic configuration Volume Discount	112.67 € *Unit price with basic configuration	142.46 € *Unit price with basic configuration	37.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	172.90 € *Unit price with basic configuration	- Volume Discount	- Volume Discount	69.89 € *Unit price with basic configuration	84.73 € *Unit price with basic configuration	125.12 € *Unit price with basic configuration	91.40 € *Unit price with basic configuration Volume Discount	132.60 € *Unit price with basic configuration	121.20 € *Unit price with basic configuration Volume Discount	88.82 € *Unit price with basic configuration Volume Discount	96.47 € *Unit price with basic configuration Volume Discount	58.31 € *Unit price with basic configuration Volume Discount	45.25 € Special price *Unit price with basic configuration Promotional pricing	110.27 € *Unit price with basic configuration Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	74.90 € *Unit price with basic configuration Volume Discount	46.74 € *Unit price with basic configuration Volume Discount	64.20 € *Unit price with basic configuration Volume Discount	24.07 € *Unit price with basic configuration Volume Discount	13.95 € *Unit price with basic configuration Volume Discount	23.35 € *Unit price with basic configuration Volume Discount	45.59 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	34.83 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	113.26 € *Unit price with basic configuration Volume Discount	64.27 € *Unit price with basic configuration Volume Discount	71.52 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	5 Days	5 Days	5 Days	6 Days	6 Days	Same day	6 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	Same day	8 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Specifications	Stock		TS General Steel 2 Flutes B (Stub)	DIA Graphite 2 Flutes L (Long)	MR General Steel 2 Flutes S (Short)			Stock		TS General Steel 2 Flutes S (Short)	DLC Aluminum 2 Flutes S (Short)														TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	XAL General Steel 2 Flutes	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	Non-Coated General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes	TS General Steel 3 Flutes	TS General Steel 2 Flutes	TS General Steel 3 Flutes	TS General Steel 4 Flutes	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes
R Size(mm)	0.05 ～ 3	0.4 ～ 20	0.5 ～ 5	0.5 ～ 6	0.1 ～ 10	0.5 ～ 6	10	0.03 ～ 6	0.1 ～ 3	0.05 ～ 10	0.5 ～ 6	0.1 ～ 1.5	0.2 ～ 1.5	0.2 ～ 1.5	0.5 ～ 15	1 ～ 6	0.5 ～ 6	0.25 ～ 3	0.5 ～ 3	0.05 ～ 3	0.05 ～ 3	0.5 ～ 15	0.05 ～ 10	0.1 ～ 2.5	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.05 ～ 10	0.2 ～ 12.5	2 ～ 8	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	0.2 ～ 10	0.15 ～ 5	0.5 ～ 3	0.05 ～ 3	0.5 ～ 3	1 ～ 3	1 ～ 5	0.3 ～ 3	0.5 ～ 3
Type	Long-Neck Ball	Ball	Long-Neck Ball / Spherical Ball	Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Spherical Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball
work material	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Graphite[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Aluminum[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]
Blade length (ℓ)(mm)	0.08 ～ 4.8	3 ～ 70	-	3 ～ 55	0.4 ～ 25	2.5 ～ 22	15	0.06 ～ 22	0.15 ～ 3.6	0.2 ～ 25	1.5 ～ 18	0.4 ～ 8	0.8 ～ 8	0.3 ～ 1.8	2.5 ～ 55	20 ～ 130	0.7 ～ 8.1	0.5 ～ 6	1.5 ～ 10	0.1 ～ 10	0.08 ～ 4.8	8 ～ 60	0.2 ～ 38	0.3 ～ 6	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.2 ～ 38	0.8 ～ 50	8 ～ 30	1.5 ～ 30	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	0.8 ～ 25	0.3 ～ 8	0.8 ～ 6	0.07 ～ 8	0.8 ～ 4.8	1.6 ～ 6	1 ～ 5	0.6 ～ 6	0.8 ～ 4.8
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	4	4	2	2	3	2	2 ～ 3	4	2	2	3
Coating	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	Dia Coat	MRC	Dia Coat	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	DLC	CrN	TiAlN	Non-Coated	TiAlN	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiCN	-	For General Steels (AlCrN, etc.)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Overall Length (L)(mm)	45 ～ 120	45 ～ 180	70 ～ 90	50 ～ 200	50 ～ 150	60 ～ 140	58	50 ～ 110	50 ～ 70	40 ～ 150	50 ～ 110	40	40	45 ～ 50	50 ～ 180	100 ～ 200	60 ～ 110	60 ～ 90	60 ～ 80	50 ～ 80	45 ～ 120	60 ～ 180	40 ～ 160	45 ～ 100	60 ～ 90	40	40 ～ 65	40 ～ 160	40 ～ 180	100 ～ 250	50 ～ 140	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	40 ～ 150	50 ～ 110	50 ～ 110	40 ～ 110	50 ～ 110	50 ～ 70	50 ～ 90	40	70 ～ 110
Underneck length (ℓ1)(mm)	0.3 ～ 60	-	4 ～ 55	20 ～ 65	-	-	-	-	0.3 ～ 18	15 ～ 75	14 ～ 68	-	-	1.2 ～ 6	-	25 ～ 80	5 ～ 60	2.5 ～ 30	-	-	0.3 ～ 60	-	-	-	-	-	-	-	-	-	17 ～ 80	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	-	1.5 ～ 60	7 ～ 60	0.2 ～ 60	3 ～ 50	4 ～ 30	5 ～ 10	-	20 ～ 50
Shank diameter (d)(mm)	3 ～ 6	4 ～ 32	6 ～ 10	4 ～ 12	4 ～ 20	4 ～ 12	12	4 ～ 12	4	3 ～ 20	4 ～ 12	3	3	4 ～ 6	4 ～ 25	6 ～ 12	6 ～ 12	6	6	4 ～ 6	3 ～ 6	4 ～ 25	4 ～ 20	4 ～ 6	6	6	4 ～ 12	3 ～ 20	3 ～ 25	4 ～ 16	4 ～ 16	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	3 ～ 20	4 ～ 12	4 ～ 8	3 ～ 8	4 ～ 6	4 ～ 6	6 ～ 10	6	4 ～ 8
R Precision(μm)	-0.005～0.005 ～ -0.002～0.002	±0.02	±0.01	±0.01	±0.005 ～ ±0.01	-	-0.01～+0.01	-0.007～0.007 ～ -0.002～0.002	0.05～-0.05 ～ 5 to -5	-0.007 ~ +0.003 ～ ±0.01	±0.01	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01	-	-	-0.005～+0.005	0.01～-0.01	0.002～-0.002	-0.005～0.005 ～ -0.002～0.002	±0.02	-0.007 to 0.003 ～ ±0.01	＋0.01～－0.01	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005
Machining Application	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving

1
2
3
4
5
Next >>

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.9
- 18
- 19
- 20
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

160

170

175

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25
- 26～26.8
  - 26
  - 26.8
- 27
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.5
  - 31
  - 31.5
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.2
  - 44
  - 44.2
- 45～45.2
  - 45
  - 45.2
- 46～46.5
  - 46
  - 46.5
- 47.5
- 48～48.9
  - 48
  - 48.9
- 49
- 50
- 52
- 54～54.5
  - 54
  - 54.5
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[4-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7.80

7.94

8

9.52

9.70

10

11.70

12

12.7

14

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.03

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear