Carbide Ball End Mills（work material：Titanium）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

Promotional pricing

HM Coated 2-Flute, Long Neck Ball HSLB

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	28.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	126.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

HSB, HM Coated 2-Flute Ball

UNION TOOL

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	37.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flutes Short-Shank Ball End Mills HSB-S

UNION TOOL

[Features]
· Can be used for machining at short overhang lengths.

Select to compare

Configure now
Starting from^∗ ：	18.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, Miniature, FX-MG-EBD-3

OSG

The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.

Select to compare

Configure now
Starting from^∗ ：	84.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End FXS-EQD

OSG

Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	121.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

OSG

High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSBH345 3-Flute Ball-End Mill for High-Hardness

NS TOOL

Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MSB230 MUGEN-COATING 2-Flute Ball End Mill

NS TOOL

Supports three-dimensional precision machining from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

NS TOOL

The tuned Infinity coating sustains high precision machining for a long time

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

WXL-Coated 2-Flute Ball End Type WXL-EBD

OSG

[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GS MILL Long Neck Hard Ball GSBNH2

NACHI(FUJIKOSHI)

Suitable for microfabrication of mold. A variety of size alignment allows for multiple types of machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mold Meister Ball 2MMR

NACHI(FUJIKOSHI)

Ideal for polishing of precision molds. R accuracy ± 3μm, R accuracy range 180 °

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	188.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, WX-EBD

OSG

General-purpose ball end mill for a wide range of workpieces and machining. High toughness carbide-based materials achieve a stable long-term continuous machining.

Select to compare

Configure now
Starting from^∗ ：	33.32 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, WXS-EBD

OSG

High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.

Select to compare

Configure now
Starting from^∗ ：	30.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD

OSG

WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (High Precision Type) FX-EBD-6

OSG

High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.

Select to compare

Configure now
Starting from^∗ ：	89.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Shank, Ball End, FX-LS-MG-EBD

OSG

Depth of long shank can be processed

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

OSG

Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

OSG

Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.

Select to compare

Configure now
Starting from^∗ ：	86.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

OSG

Oil hole is quite useful in the machining of deep parts with chip emission problem.

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

OSG

Extremely increased rigidity ball end mill with oil hole for high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

OSG

Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.

Select to compare

Configure now
Starting from^∗ ：	84.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD

OSG

[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

OSG

Ball end mill for deep engraving work that ordinary end mills can't reach.

Select to compare

Configure now
Starting from^∗ ：	239.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

OSG

Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

OSG

WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

Select to compare

Configure now
Starting from^∗ ：	20.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

OSG

Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	57.40 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

OSG

Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

OSG

Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.

Select to compare

Configure now
Starting from^∗ ：	35.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

UNION TOOL

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.34 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HBL, HM Coated 2-Flute Long Shank Ball

UNION TOOL

[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet type

Select to compare

Configure now
Starting from^∗ ：	110.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

HLB, HM Coated 2-Flute Long Neck Ball

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Select to compare

Configure now
Starting from^∗ ：	48.19 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

HTNB HM Coated High-Precision Taper Neck Ball

UNION TOOL

[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cut

Select to compare

Configure now
Starting from^∗ ：	69.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSB345 3-Flute Ball-End Mill

NS TOOL

Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	71.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)

NS TOOL

Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MRBH230 Long-Neck Ball, Hard (for High Hardness)

NS TOOL

The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	32.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBH230 2-Flute Ball-End Mill for High-Hardness

NS TOOL

Standard type ball end mill for high hardness. Ideal for finishing

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	31.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

MSB230S MUGEN-COATING Short Ball End Mill

NS TOOL

The high-rigidity design enables high speed machining without chattering

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill

NS TOOL

The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

NS TOOL

Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBL230 MUGEN-COATING Long Ball End Mill

NS TOOL

Machining utilizing the benefits of a long shank is possible

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare
Brand	UNION TOOL	SANDVIK	UNION TOOL	UNION TOOL	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL
Product Series	HM Coated 2-Flute, Long Neck Ball HSLB	Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank	HSB, HM Coated 2-Flute Ball	2-Flutes Short-Shank Ball End Mills HSB-S	2-Flute, Ball End, Miniature, FX-MG-EBD-3	2-Flute, Ball End, FX-MG-EBD	Spherical Ball End FXS-EQD	2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230 MUGEN-COATING 2-Flute Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	WXL-Coated 2-Flute Ball End Type WXL-EBD	GS MILL Long Neck Hard Ball GSBNH2	Mold Meister Ball 2MMR	2-Flute, Ball End, WX-EBD	2-Flute, Ball End, WXS-EBD	2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD	2-Flute, Ball End (High Precision Type) FX-EBD-6	2-Flute, Long Shank, Ball End, FX-LS-MG-EBD	2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS	2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD	2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD	2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS	2-Flute Pencil Neck, Ball End FX-PC-MG-EBD	WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD	2-Flute Pencil Long Neck, Ball End FX-PCL-EBD	For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD	2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD	2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD	2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD	2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD	HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)	HBL, HM Coated 2-Flute Long Shank Ball	HLB, HM Coated 2-Flute Long Neck Ball	HTNB HM Coated High-Precision Taper Neck Ball	MSB345 3-Flute Ball-End Mill	MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)	MRBH230 Long-Neck Ball, Hard (for High Hardness)	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	MSBL230 MUGEN-COATING Long Ball End Mill
Starting from^∗	28.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	126.95 € *Unit price with basic configuration Volume Discount	37.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.08 € *Unit price with basic configuration	84.73 € *Unit price with basic configuration	91.40 € *Unit price with basic configuration Volume Discount	121.20 € *Unit price with basic configuration Volume Discount	88.82 € *Unit price with basic configuration Volume Discount	96.47 € *Unit price with basic configuration Volume Discount	28.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	58.31 € *Unit price with basic configuration Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	58.45 € *Unit price with basic configuration Volume Discount	188.08 € *Unit price with basic configuration Volume Discount	33.32 € *Unit price with basic configuration	30.41 € *Unit price with basic configuration	41.80 € *Unit price with basic configuration Volume Discount	89.48 € *Unit price with basic configuration	101.29 € *Unit price with basic configuration	87.89 € *Unit price with basic configuration Volume Discount	86.67 € *Unit price with basic configuration	91.40 € *Unit price with basic configuration	95.68 € *Unit price with basic configuration Volume Discount	84.69 € *Unit price with basic configuration	63.80 € *Unit price with basic configuration Volume Discount	239.02 € *Unit price with basic configuration	83.15 € *Unit price with basic configuration Volume Discount	20.02 € *Unit price with basic configuration	57.40 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	35.60 € *Unit price with basic configuration	43.34 € Special price *Unit price with basic configuration Promotional pricing	110.99 € *Unit price with basic configuration	48.19 € *Unit price with basic configuration	69.30 € Special price *Unit price with basic configuration Promotional pricing	71.66 € *Unit price with basic configuration Volume Discount	45.91 € *Unit price with basic configuration Volume Discount	32.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.61 € *Unit price with basic configuration Volume Discount	37.33 € *Unit price with basic configuration Volume Discount	36.37 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	43.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	52.58 € *Unit price with basic configuration Volume Discount	31.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	110.77 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	8 Days	6 Days	7 Days	Same day	6 Days	6 Days	Same day	Same day	6 Days	Same day	Same day	6 Days	Same day	6 Days
Specifications	Stock		Stock																																			Stock	Stock
R Size(mm)	0.05 ～ 3	0.5 ～ 6	0.03 ～ 6	0.1 ～ 2	0.2 ～ 1.5	0.5 ～ 15	0.5 ～ 6	0.25 ～ 3	0.5 ～ 3	0.05 ～ 6	0.05 ～ 3	0.05 ～ 10	0.5	0.5 ～ 6	0.6	0.75 ～ 2	0.1 ～ 6	0.1 ～ 3	3	0.5 ～ 6	4	3 ～ 10	3 ～ 10	0.3 ～ 6	0.1 ～ 6	2 ～ 6	0.5 ～ 6	0.3 ～ 1.5	0.1 ～ 3	0.05 ～ 3	0.1 ～ 3	0.1 ～ 0.75	1.5 ～ 6	0.4 ～ 3	0.1 ～ 2	0.5 ～ 6	0.1 ～ 3	0.05 ～ 3	0.05 ～ 6	0.1 ～ 6	0.1 ～ 1.5	0.1 ～ 6	0.1 ～ 2	0.05 ～ 3	0.1 ～ 5
Type	Long-Neck Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Spherical Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Tapered neck ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Tapered neck ball	Long-Neck Ball	Ball
work material	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]
Blade length (ℓ)(mm)	0.08 ～ 4.8	1 ～ 12	0.06 ～ 22	0.2 ～ 4	0.8 ～ 8	2.5 ～ 55	0.7 ～ 8.1	0.5 ～ 6	1.5 ～ 10	0.1 ～ 20	0.1 ～ 10	0.2 ～ 38	1.5	1.5 ～ 18	3	1.5 ～ 4	0.4 ～ 18	0.2 ～ 6	12	1 ～ 12	8	12 ～ 38	6 ～ 20	0.6 ～ 22	0.16 ～ 12	8 ～ 22	1 ～ 12	0.5 ～ 2.4	0.16 ～ 4.8	0.08 ～ 6	0.16 ～ 4.8	0.3 ～ 2.5	4.5 ～ 25	0.64 ～ 4.8	0.16 ～ 3.2	1.5 ～ 20	0.2 ～ 6	0.07 ～ 6	0.1 ～ 20	0.2 ～ 12	0.15 ～ 2.5	0.2 ～ 12	0.2 ～ 4	0.07 ～ 6	0.5 ～ 25
Number of flutes(sheet)	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2
Coating	For High Hardness (Silicon Group)	Other	For High Hardness (Silicon Group)	-	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
Overall Length (L)(mm)	45 ～ 120	57 ～ 140	50 ～ 110	35 ～ 40	40	50 ～ 180	60 ～ 110	60 ～ 90	60 ～ 80	50 ～ 110	50 ～ 80	40 ～ 160	45	50 ～ 120	50	50 ～ 60	35 ～ 70	50	140	50 ～ 80	60	90 ～ 160	90 ～ 160	60 ～ 160	45 ～ 160	200 ～ 250	50 ～ 80	35 ～ 40	45 ～ 90	45 ～ 120	45 ～ 120	50	80 ～ 200	45 ～ 80	50 ～ 120	60 ～ 120	35 ～ 45	45 ～ 120	50 ～ 100	35 ～ 60	35 ～ 50	50 ～ 110	50 ～ 110	45 ～ 120	70 ～ 200
Underneck length (ℓ1)(mm)	0.3 ～ 60	20	-	-	-	-	5 ～ 60	2.5 ～ 30	-	-	-	-	-	-	-	3 ～ 8	-	1.1 ～ 9	-	2.5 ～ 30	16	-	-	10 ～ 80	1 ～ 80	100 ～ 140	2.5 ～ 30	1.5 ～ 12	0.5 ～ 40	0.3 ～ 50	0.5 ～ 50	-	-	3 ～ 30	1.5 ～ 62	-	0.5 ～ 15	0.2 ～ 50	-	-	0.5 ～ 20	-	1 ～ 60	0.3 ～ 50	-
Shank diameter (d)(mm)	3 ～ 6	6 ～ 16	4 ～ 12	4 ～ 6	3	4 ～ 25	6 ～ 12	6	6	4 ～ 12	4 ～ 6	4 ～ 20	4	4 ～ 12	4	4	4 ～ 12	6	6	6 ～ 12	8	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 16	10 ～ 16	6 ～ 12	4	4 ～ 6	3 ～ 6	4 ～ 6	4	3 ～ 12	4 ～ 6	4 ～ 6	6 ～ 12	4 ～ 6	4 ～ 6	4 ～ 12	4 ～ 12	4	4 ～ 12	4 ～ 8	4 ～ 6	3 ～ 10
R Precision(μm)	-0.005～0.005 ～ -0.002～0.002	-	-0.007～0.007 ～ -0.002～0.002	±3	-0.01～+0.01	-0.01～+0.01	-	-0.005～+0.005	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.002～-0.002	-0.007 to 0.003 ～ ±0.01	-	-0.003～+0.003	-0.01～+0.01	-0.007～+0.007 ～ -0.005～+0.005	-0.007～+0.003 ～ -0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.015～+0.015 ～ -0.01	-0.003～+0.003	-0.01～+0.01	-0.01～+0.01	-0.01～0.01	-0.005 to +0.005 ～ -0.005～+0.005	-0.01～0.01	-0.01～+0.01	-0.005～+0.005	-0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.002～0.002	-0.005～0.005	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.9
- 18
- 19
- 20
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
Drawing

Clear

Number of flutes(sheet)
1

2

3

4
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

160

170

175

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25
- 26～26.8
  - 26
  - 26.8
- 27
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.5
  - 31
  - 31.5
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.2
  - 44
  - 44.2
- 45～45.2
  - 45
  - 45.2
- 46～46.5
  - 46
  - 46.5
- 47.5
- 48～48.9
  - 48
  - 48.9
- 49
- 50
- 52
- 54～54.5
  - 54
  - 54.5
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7.80

7.94

8

9.52

9.70

10

11.70

12

12.7

14

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.03

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear

Machining Application
- Curved surface
- Side
- Engraving
- R Groove
Images

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (23)
- NS TOOL (16)
- UNION TOOL (10)
- SANDVIK (7)
- 7 LEADERS (4)
- DIJET (3)
- NACHI(FUJIKOSHI) (3)
- OKAZAKI SEIKO (3)
- SPEED TIGER (0)
- SANKO MFG (0)
- VAN_HOORN (0)
- GUHRING (0)
- TOYO DRILL (0)
- TUNGALOY (0)
- THE CUT (0)
- ATOM (0)
- WIDIN (0)
- KYOWA SEIKO (0)
- ASAHI TOOLS (0)
- EIKOSHA (0)
Clear