Ball End Mills (Carbide)（Machining Application：Curved surface）

156

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

MISUMI

Diamond coated products that exert tremendous durability are available in the industry's lowest price

Volume Discount

DIA
Graphite
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	111.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, Miniature, FX-MG-EBD-3

OSG

The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.

Select to compare

Configure now
Starting from^∗ ：	84.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, DIA-EBD

OSG

Not only is high speed processing of aluminum possible, dry cutting of aluminum is also possible. A dramatic elongation of the life of tool is possible for graphite processing as well.

Select to compare

Configure now
Starting from^∗ ：	112.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Ball End Mill CSBE

EIKOSHA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	103.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XAL series carbide ball end mill, 2-flute / short model

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	13.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

MISUMI

The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating

Volume Discount

DLC
Aluminum
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

CBN Ball End Mill, 2-Flute

MISUMI

CBN ball end mill that's ideal for precision finishing is available at a value price

Volume Discount

High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	138.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

MISUMI

High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

Volume Discount

MR
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End GX-EQD-SF

OSG

Ball end mills having spherical cutting tips developed for shrink fitting.

Select to compare

Configure now
Starting from^∗ ：	142.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MSB230 MUGEN-COATING 2-Flute Ball End Mill

NS TOOL

Supports three-dimensional precision machining from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

X Coated Miniature Ball-End Mill NCB-2X

NS TOOL

Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	90.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type

EIKOSHA

Graphite Electrode Processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

WXL-Coated 2-Flute Ball End Type WXL-EBD

OSG

[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Miniature Ball End Mill KMBE-2

KYOWA SEIKO

[Features] It can be used for side machining, curved surface machining, curving, R-machining and grooving. [Features] Using carbide materials with high hardness, it can cut general steel, heat-treated steel and stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroMill Plura, Center Cut, R216.42-AK-G-16 (Hardness 43HRc to 63HRc)

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	146.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide ball end mill (R accuracy ±3μm)

MISUMI

[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	46.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

MISUMI

[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

MISUMI

[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	24.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short model

MISUMI

[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	23.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	45.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, short model

MISUMI

[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, regular model

MISUMI

[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / short model

MISUMI

[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / regular model

MISUMI

[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, short model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 4-flute / regular model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide ball end mill, 2-flute / short model

MISUMI

Highly versatile due to the non-coated specification

Volume Discount

Non-Coated
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

MISUMI

[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	113.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

MISUMI

The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

Volume Discount

TS
High-Hardness Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

MISUMI

Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS

Volume Discount

TS
SUS
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	103.49 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

MISUMI

A type for aluminum that achieves high efficiency while having the affordable uncoated design

Volume Discount

Non-Coated
Aluminum
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

MISUMI

Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

Volume Discount

CrN
Copper
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	35.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

MISUMI

4-flute ball for graphite that achieves high feed

Volume Discount

DIA
Graphite
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	99.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

MISUMI

The price of the non-coated product with excellent cost performance has been further reduced

Volume Discount

Non-Coated
Graphite
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	77.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

MISUMI

Sharp edge that's suitable for machining resin

Volume Discount

Non-Coated
Resin
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	30.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

MISUMI

The user friendly regular flute length type is released simultaneously

Volume Discount

MR
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

MISUMI

The regular flute length type is introduced in the low-price and popular XAL balls

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

GS MILL Long Neck Hard Ball GSBNH2

NACHI(FUJIKOSHI)

Suitable for microfabrication of mold. A variety of size alignment allows for multiple types of machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CBN Mold Finish Master BNBP

NACHI(FUJIKOSHI)

-CBN ball nose end mill.
-Suitable for high speed finishing of tools made of high hardness materials.

Select to compare

Configure now
Starting from^∗ ：	339.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DLC Mill, Ball 2DLCR

NACHI(FUJIKOSHI)

End-mill for aluminum and copper alloys. Suitable for curved surface processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	107.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mold Meister Ball 2MMR

NACHI(FUJIKOSHI)

Ideal for polishing of precision molds. R accuracy ± 3μm, R accuracy range 180 °

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	188.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, for Graphite, Ball End DG-EBD

OSG

Diamond coating end-mill for aluminum processing. Promises wonderful elongation of tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	OSG	OSG	EIKOSHA	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	NS TOOL	NS TOOL	EIKOSHA	OSG	KYOWA SEIKO	NS TOOL	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG
Product Series	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	2-Flute, Ball End, Miniature, FX-MG-EBD-3	2-Flute, Ball End, DIA-EBD	Carbide Solid Ball End Mill CSBE	XAL series carbide ball end mill, 2-flute / short model	DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	2-Flute, Ball End, FX-MG-EBD	Spherical Ball End GX-EQD-SF	MSB230 MUGEN-COATING 2-Flute Ball End Mill	X Coated Miniature Ball-End Mill NCB-2X	Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type	WXL-Coated 2-Flute Ball End Type WXL-EBD	Carbide Miniature Ball End Mill KMBE-2	SSPB220 CBN Super Spiral Ball End Mill	CoroMill Plura, Center Cut, R216.42-AK-G-16 (Hardness 43HRc to 63HRc)	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, 4-flute / regular model	Carbide ball end mill, 2-flute / short model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model	Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model	Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	GS MILL Long Neck Hard Ball GSBNH2	CBN Mold Finish Master BNBP	DLC Mill, Ball 2DLCR	Mold Meister Ball 2MMR	2-Flute, for Graphite, Ball End DG-EBD
Starting from^∗	111.08 € *Unit price with basic configuration Volume Discount	84.73 € *Unit price with basic configuration	112.67 € *Unit price with basic configuration	103.57 € *Unit price with basic configuration Volume Discount	13.95 € *Unit price with basic configuration Volume Discount	- Volume Discount	138.36 € *Unit price with basic configuration Volume Discount	18.61 € *Unit price with basic configuration Volume Discount	91.40 € *Unit price with basic configuration Volume Discount	142.46 € *Unit price with basic configuration	28.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	90.74 € *Unit price with basic configuration Volume Discount	110.27 € *Unit price with basic configuration Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	95.00 € *Unit price with basic configuration Volume Discount	172.90 € *Unit price with basic configuration	146.85 € *Unit price with basic configuration Volume Discount	46.74 € *Unit price with basic configuration Volume Discount	64.20 € *Unit price with basic configuration Volume Discount	24.07 € *Unit price with basic configuration Volume Discount	23.35 € *Unit price with basic configuration Volume Discount	45.59 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	113.26 € *Unit price with basic configuration Volume Discount	64.27 € *Unit price with basic configuration Volume Discount	103.49 € *Unit price with basic configuration Volume Discount	- Volume Discount	35.08 € *Unit price with basic configuration Volume Discount	99.52 € *Unit price with basic configuration Volume Discount	77.02 € *Unit price with basic configuration Volume Discount	30.26 € *Unit price with basic configuration Volume Discount	22.05 € *Unit price with basic configuration Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	58.45 € *Unit price with basic configuration Volume Discount	339.04 € *Unit price with basic configuration	107.75 € *Unit price with basic configuration Volume Discount	188.08 € *Unit price with basic configuration Volume Discount	115.38 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications	DIA Graphite 2 Flutes L (Long)				XAL General Steel 2 Flutes	DLC Aluminum 2 Flutes S (Short)	High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)										TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	Non-Coated General Steel 2 Flutes S (Short)	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS SUS 2 Flutes S (Short)	Non-Coated Aluminum 2 Flutes S (Short)	CrN Copper 2 Flutes S (Short)	DIA Graphite 4 Flutes S (Short)	Non-Coated Graphite 2 Flutes L (Long)	Non-Coated Resin 2 Flutes S (Short)	MR General Steel 2 Flutes R (Regular)	XAL General Steel 2 Flutes
R Size(mm)	0.5 ～ 6	0.2 ～ 1.5	0.5 ～ 6	0.4 ～ 20	0.05 ～ 10	0.5 ～ 6	0.3 ～ 1	0.1 ～ 10	0.5 ～ 15	10	0.05 ～ 6	0.2 ～ 0.9	0.5 ～ 15	0.05 ～ 10	0.1 ～ 1.5	0.1 ～ 3	0.5 ～ 8	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.2 ～ 12.5	2 ～ 8	0.05 ～ 10	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	0.2 ～ 10	1 ～ 5	0.3 ～ 3	1 ～ 5	0.5 ～ 6	0.5 ～ 6	1 ～ 6	1 ～ 6	0.5 ～ 6	0.2 ～ 8	0.2 ～ 8	0.5	0.2 ～ 1	2.5	0.5 ～ 6	2 ～ 6
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball
work material	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Graphite[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	Aluminum[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[○] / Graphite[◎] / Resin[◎]
Blade length (ℓ)(mm)	3 ～ 55	0.8 ～ 8	2.5 ～ 22	3 ～ 70	0.2 ～ 38	1.5 ～ 18	0.5 ～ 1.2	0.4 ～ 25	2.5 ～ 55	15	0.1 ～ 20	0.8 ～ 3.6	8 ～ 60	0.2 ～ 38	0.4 ～ 8	0.15 ～ 3.6	1.5 ～ 32	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.8 ～ 50	8 ～ 30	0.2 ～ 25	1.5 ～ 30	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	0.8 ～ 25	1 ～ 5	0.6 ～ 6	3 ～ 15	1.5 ～ 18	1.5 ～ 18	4 ～ 24	10 ～ 55	1.5 ～ 18	1.5 ～ 30	1.5 ～ 48	1.5	0.3 ～ 1.4	7.5	1.5 ～ 18	8 ～ 60
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	4	4	2	2	2	2	2	2	4	2	2	2	2	2	2	2	2	2
Coating	Dia Coat	TiAlN	Dia Coat	-	For General Steels (AlCrN, etc.)	DLC	Non-Coated	MRC	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiCN	-	For General Steels (AlCrN, etc.)	-	Non-Coated	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	CrN	Dia Coat	Non-Coated	Non-Coated	MRC	For General Steels (AlCrN, etc.)	TiAlN	-	DLC	TiAlN	DG
Overall Length (L)(mm)	50 ～ 200	40	60 ～ 140	45 ～ 180	40 ～ 160	50 ～ 110	50	50 ～ 150	50 ～ 180	58	50 ～ 110	35	60 ～ 180	40 ～ 160	40	50 ～ 70	57 ～ 125	60 ～ 90	40	40 ～ 65	40 ～ 180	100 ～ 250	40 ～ 150	50 ～ 140	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	40 ～ 150	50 ～ 90	40	50 ～ 100	50 ～ 110	50 ～ 120	50 ～ 80	100 ～ 200	50 ～ 120	50 ～ 140	50 ～ 140	45	50	90	50 ～ 120	80 ～ 200
Underneck length (ℓ1)(mm)	20 ～ 65	-	-	-	-	14 ～ 68	1.5 ～ 5	-	-	-	-	-	-	-	-	0.3 ～ 18	3 ～ 8	-	-	-	-	-	15 ～ 75	17 ～ 80	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	-	5 ～ 10	-	-	14 ～ 68	-	-	20 ～ 65	-	-	-	-	1.2 ～ 5.5	14	-	-
Shank diameter (d)(mm)	4 ～ 12	3	4 ～ 12	4 ～ 32	3 ～ 20	4 ～ 12	4	4 ～ 20	4 ～ 25	12	4 ～ 12	3	4 ～ 25	4 ～ 20	3	4	6 ～ 16	6	6	4 ～ 12	3 ～ 25	4 ～ 16	3 ～ 20	4 ～ 16	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	3 ～ 20	6 ～ 10	6	6 ～ 10	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 16	4 ～ 16	4	4 ～ 6	6	4 ～ 12	4 ～ 12
R Precision(μm)	±0.01	-0.01～+0.01	-	±0.02	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.005	±0.005 ～ ±0.01	-0.01～+0.01	-0.01～+0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	±0.02	-0.007 to 0.003 ～ ±0.01	＋0.01～－0.01	0.05～-0.05 ～ 5 to -5	-	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.005 ~ +0.001 ～ ±0.003	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.005 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-	-	0～-0.03	-0.003～+0.003	-0.01～+0.01
Machining Application	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface

1
2
3
4
Next >>

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

0.075

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.275

0.3

0.325

0.35

0.375

0.4

0.425

0.45

0.475

0.5

0.55

0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

3.8

3.85

3.9

3.95

4

4.05

4.1

4.15

4.2

4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.95
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.08
  - 0.1
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.38
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.63
  - 0.7
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.3
  - 1.4
  - 1.42
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.75
  - 3.8
  - 3.81
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.5
  - 9
  - 9.5
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.9
- 18
- 19
- 20
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

50

52

53

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

120

121

125

130

140

150

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.3～0.75
  - 0.3
  - 0.5
  - 0.6
  - 0.75
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.4
  - 2.5
  - 2.7
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6
- 7～7.5
  - 7
  - 7.5
- 8～8.
  - 8
  - 8.
- 9
- 10
- 11
- 12～12.5
  - 12
  - 12.5
- 14
- 15
- 16
- 18
- 20
- 21
- 24
- 25
- 27
- 28
- 30
- 31.5
- 32～32.1
  - 32
  - 32.1
- 33.5～33.6
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36
- 38～38.6
  - 38
  - 38.6
- 39.5
- 40
- 41.2～41.4
  - 41.2
  - 41.4
- 42.2
- 43.2
- 44～44.2
  - 44
  - 44.2
- 45～45.2
  - 45
  - 45.2
- 46.5
- 47.5
- 48
- 49
- 50
- 52
- 54～54.5
  - 54
  - 54.5
- 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61.3～61.8
  - 61.3
  - 61.8
- 62.3～62.5
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[14-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7.80

7.94

8

9.52

9.70

10

11.70

12

12.7

14

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～+0.005

-0.003～+0.003

0～-50

0～-40

0～-0.03

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10
Clear