Ball End Mills (Carbide)（work material：High Hardness Steel: to HRC55）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

2-Flute, Ball End, Miniature, FX-MG-EBD-3

OSG

The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.

Select to compare

Configure now
Starting from^∗ ：	84.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flutes Short-Shank Ball End Mills HSB-S

UNION TOOL

[Features]
· Can be used for machining at short overhang lengths.

Select to compare

Configure now
Starting from^∗ ：	18.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XAL series carbide ball end mill, 2-flute / short model

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	13.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

CBN Ball End Mill, 2-Flute

MISUMI

CBN ball end mill that's ideal for precision finishing is available at a value price

Volume Discount

High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	138.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

MISUMI

High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

Volume Discount

MR
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MSB230 MUGEN-COATING 2-Flute Ball End Mill

NS TOOL

Supports three-dimensional precision machining from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

X Coated Miniature Ball-End Mill NCB-2X

NS TOOL

Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	90.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

WXL-Coated 2-Flute Ball End Type WXL-EBD

OSG

[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide ball end mill (R accuracy ±3μm)

MISUMI

[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	46.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

MISUMI

[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

MISUMI

[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	24.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short model

MISUMI

[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	23.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	45.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, short model

MISUMI

[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, regular model

MISUMI

[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / short model

MISUMI

[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / regular model

MISUMI

[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, short model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 4-flute / regular model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

MISUMI

[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	113.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

MISUMI

The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

Volume Discount

TS
High-Hardness Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

MISUMI

The user friendly regular flute length type is released simultaneously

Volume Discount

MR
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

MISUMI

The regular flute length type is introduced in the low-price and popular XAL balls

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

GS MILL Long Neck Hard Ball GSBNH2

NACHI(FUJIKOSHI)

Suitable for microfabrication of mold. A variety of size alignment allows for multiple types of machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CBN Mold Finish Master BNBP

NACHI(FUJIKOSHI)

-CBN ball nose end mill.
-Suitable for high speed finishing of tools made of high hardness materials.

Select to compare

Configure now
Starting from^∗ ：	339.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mold Meister Ball 2MMR

NACHI(FUJIKOSHI)

Ideal for polishing of precision molds. R accuracy ± 3μm, R accuracy range 180 °

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	188.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6

OSG

High pencil neck of stiffness and ultra-fine cemented carbide achieves high-speed, high-precision, ultra-life. Eliminate chatter problems in fine shape processing and dug processing.

Select to compare

Configure now
Starting from^∗ ：	83.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-EBD

OSG

2-Flute Ball End Type CBN-EBD
-Demonstrates high performance when machining high strength materials and cast iron
-The wide selection of CBN tools allows you to choose the best tool for your application.

Select to compare

Configure now
Starting from^∗ ：	235.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-SXB

OSG

Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the Carbide

Select to compare

Configure now
Starting from^∗ ：	125.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, WX-EBD

OSG

General-purpose ball end mill for a wide range of workpieces and machining. High toughness carbide-based materials achieve a stable long-term continuous machining.

Select to compare

Configure now
Starting from^∗ ：	33.32 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, WXS-EBD

OSG

High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.

Select to compare

Configure now
Starting from^∗ ：	30.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD

OSG

WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (High Precision Type) FX-EBD-6

OSG

High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.

Select to compare

Configure now
Starting from^∗ ：	89.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Shank, Ball End, FX-LS-MG-EBD

OSG

Depth of long shank can be processed

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

OSG

Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

OSG

Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.

Select to compare

Configure now
Starting from^∗ ：	86.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

OSG

Oil hole is quite useful in the machining of deep parts with chip emission problem.

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

OSG

Extremely increased rigidity ball end mill with oil hole for high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

OSG

Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.

Select to compare

Configure now
Starting from^∗ ：	84.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD

OSG

[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

OSG

Ball end mill for deep engraving work that ordinary end mills can't reach.

Select to compare

Configure now
Starting from^∗ ：	239.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

OSG

Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.

Select to compare

Configure now
Starting from^∗ ：	83.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	UNION TOOL	MISUMI	MISUMI	MISUMI	OSG	NS TOOL	NS TOOL	OSG	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	2-Flute, Ball End, Miniature, FX-MG-EBD-3	2-Flutes Short-Shank Ball End Mills HSB-S	XAL series carbide ball end mill, 2-flute / short model	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	2-Flute, Ball End, FX-MG-EBD	MSB230 MUGEN-COATING 2-Flute Ball End Mill	X Coated Miniature Ball-End Mill NCB-2X	WXL-Coated 2-Flute Ball End Type WXL-EBD	SSPB220 CBN Super Spiral Ball End Mill	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, 4-flute / regular model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	GS MILL Long Neck Hard Ball GSBNH2	CBN Mold Finish Master BNBP	Mold Meister Ball 2MMR	2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6	2-Flute, Ball End, CBN-EBD	2-Flute, Ball End, CBN-SXB	2-Flute, Ball End, WX-EBD	2-Flute, Ball End, WXS-EBD	2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD	2-Flute, Ball End (High Precision Type) FX-EBD-6	2-Flute, Long Shank, Ball End, FX-LS-MG-EBD	2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS	2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD	2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD	2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS	2-Flute Pencil Neck, Ball End FX-PC-MG-EBD	WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD	2-Flute Pencil Long Neck, Ball End FX-PCL-EBD	3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT
Starting from^∗	84.73 € *Unit price with basic configuration	18.08 € *Unit price with basic configuration	13.95 € *Unit price with basic configuration Volume Discount	138.36 € *Unit price with basic configuration Volume Discount	18.61 € *Unit price with basic configuration Volume Discount	91.40 € *Unit price with basic configuration Volume Discount	28.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	90.74 € *Unit price with basic configuration Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	172.90 € *Unit price with basic configuration	46.74 € *Unit price with basic configuration Volume Discount	64.20 € *Unit price with basic configuration Volume Discount	24.07 € *Unit price with basic configuration Volume Discount	23.35 € *Unit price with basic configuration Volume Discount	45.59 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	113.26 € *Unit price with basic configuration Volume Discount	64.27 € *Unit price with basic configuration Volume Discount	22.05 € *Unit price with basic configuration Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	58.45 € *Unit price with basic configuration Volume Discount	339.04 € *Unit price with basic configuration	188.08 € *Unit price with basic configuration Volume Discount	83.69 € *Unit price with basic configuration	235.08 € *Unit price with basic configuration	125.12 € *Unit price with basic configuration	33.32 € *Unit price with basic configuration	30.41 € *Unit price with basic configuration	41.80 € *Unit price with basic configuration Volume Discount	89.48 € *Unit price with basic configuration	101.29 € *Unit price with basic configuration	87.89 € *Unit price with basic configuration Volume Discount	86.67 € *Unit price with basic configuration	91.40 € *Unit price with basic configuration	95.68 € *Unit price with basic configuration Volume Discount	84.69 € *Unit price with basic configuration	63.80 € *Unit price with basic configuration Volume Discount	239.02 € *Unit price with basic configuration	83.42 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	5 Days	5 Days	5 Days	6 Days	Same day	6 Days	Same day	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications			XAL General Steel 2 Flutes	High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)						TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	MR General Steel 2 Flutes R (Regular)	XAL General Steel 2 Flutes
R Size(mm)	0.2 ～ 1.5	0.1 ～ 2	0.05 ～ 10	0.3 ～ 1	0.1 ～ 10	0.5 ～ 15	0.05 ～ 6	0.2 ～ 0.9	0.05 ～ 10	0.1 ～ 3	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.2 ～ 12.5	2 ～ 8	0.05 ～ 10	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	1 ～ 5	0.3 ～ 3	0.2 ～ 8	0.2 ～ 8	0.5	0.2 ～ 1	0.5 ～ 6	0.1 ～ 2	3 ～ 6	0.2 ～ 1.5	0.6	0.75 ～ 2	0.1 ～ 6	0.1 ～ 3	3	0.5 ～ 6	4	3 ～ 10	3 ～ 10	0.3 ～ 6	0.1 ～ 6	2 ～ 6	0.5 ～ 6
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball
work material	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]
Blade length (ℓ)(mm)	0.8 ～ 8	0.2 ～ 4	0.2 ～ 38	0.5 ～ 1.2	0.4 ～ 25	2.5 ～ 55	0.1 ～ 20	0.8 ～ 3.6	0.2 ～ 38	0.15 ～ 3.6	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.8 ～ 50	8 ～ 30	0.2 ～ 25	1.5 ～ 30	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	1 ～ 5	0.6 ～ 6	1.5 ～ 30	1.5 ～ 48	1.5	0.3 ～ 1.4	1.5 ～ 18	0.16 ～ 3.2	4 ～ 7	0.3 ～ 1.8	3	1.5 ～ 4	0.4 ～ 18	0.2 ～ 6	12	1 ～ 12	8	12 ～ 38	6 ～ 20	0.6 ～ 22	0.16 ～ 12	8 ～ 22	1.5 ～ 18
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	4	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3
Coating	TiAlN	-	For General Steels (AlCrN, etc.)	Non-Coated	MRC	TiAlN	TiAlN	TiCN	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	MRC	For General Steels (AlCrN, etc.)	TiAlN	-	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)
Overall Length (L)(mm)	40	35 ～ 40	40 ～ 160	50	50 ～ 150	50 ～ 180	50 ～ 110	35	40 ～ 160	52 ～ 70	60 ～ 90	40	40 ～ 65	40 ～ 180	100 ～ 250	40 ～ 150	50 ～ 140	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	50 ～ 90	40	50 ～ 140	50 ～ 140	45	50	50 ～ 120	50 ～ 100	90 ～ 110	45 ～ 50	50	50 ～ 60	35 ～ 70	50	140	50 ～ 80	60	90 ～ 160	90 ～ 160	60 ～ 160	45 ～ 160	200 ～ 250	60 ～ 220
Underneck length (ℓ1)(mm)	-	-	-	1.5 ～ 5	-	-	-	-	-	0.3 ～ 18	-	-	-	-	-	15 ～ 75	17 ～ 80	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	5 ～ 10	-	-	-	-	1.2 ～ 5.5	-	1 ～ 30	20	1.2 ～ 6	-	3 ～ 8	-	1.1 ～ 9	-	2.5 ～ 30	16	-	-	10 ～ 80	1 ～ 80	100 ～ 140	6 ～ 160.8
Shank diameter (d)(mm)	3	4 ～ 6	3 ～ 20	4	4 ～ 20	4 ～ 25	4 ～ 12	3	4 ～ 20	-	6	6	4 ～ 12	3 ～ 25	4 ～ 16	3 ～ 20	4 ～ 16	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 10	6	4 ～ 16	4 ～ 16	4	4 ～ 6	4 ～ 12	6	6 ～ 12	4 ～ 6	4	4	4 ～ 12	6	6	6 ～ 12	8	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 16	10 ～ 16	6 ～ 20
R Precision(μm)	-0.01～+0.01	±3	-0.007 ~ +0.003 ～ ±0.01	±0.005	±0.005 ～ ±0.01	-0.01～+0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	-0.007 to 0.003 ～ ±0.01	3 to -3 ～ 5 to -5	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.005 ~ +0.001 ～ ±0.003	±0.005 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-	-	-0.003～+0.003	-0.005～+0.005	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01	-0.007～+0.007 ～ -0.005～+0.005	-0.007～+0.003 ～ -0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.015～+0.015 ～ -0.01	-0.003～+0.003	-0.01～+0.01	-0.01～+0.01	-0.01～0.01	-0.005 to +0.005 ～ -0.005～+0.005	-0.01～0.01	-
Machining Application	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

0.075

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.275

0.3

0.325

0.35

0.375

0.4

0.425

0.45

0.475

0.5

0.55

0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

3.8

3.85

3.9

3.95

4

4.05

4.1

4.15

4.2

4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.95
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.08
  - 0.1
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.38
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.63
  - 0.7
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.3
  - 1.4
  - 1.42
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.75
  - 3.8
  - 3.81
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.5
  - 9
  - 9.5
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.9
- 18
- 19
- 20
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

50

52

53

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

120

121

125

130

140

150

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.3～0.75
  - 0.3
  - 0.5
  - 0.6
  - 0.75
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.4
  - 2.5
  - 2.7
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6
- 7～7.5
  - 7
  - 7.5
- 8～8.
  - 8
  - 8.
- 9
- 10
- 11
- 12～12.5
  - 12
  - 12.5
- 14
- 15
- 16
- 18
- 20
- 21
- 24
- 25
- 27
- 28
- 30
- 31.5
- 32～32.1
  - 32
  - 32.1
- 33.5～33.6
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36
- 38～38.6
  - 38
  - 38.6
- 39.5
- 40
- 41.2～41.4
  - 41.2
  - 41.4
- 42.2
- 43.2
- 44～44.2
  - 44
  - 44.2
- 45～45.2
  - 45
  - 45.2
- 46.5
- 47.5
- 48
- 49
- 50
- 52
- 54～54.5
  - 54
  - 54.5
- 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61.3～61.8
  - 61.3
  - 61.8
- 62.3～62.5
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[15-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7.80

7.94

8

9.52

9.70

10

11.70

12

12.7

14

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～+0.005

-0.003～+0.003

0～-50

0～-40

0～-0.03

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10
Clear