Inserts (for Milling)（work material：Steel Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 33.10 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Milling Tip
SANDVIK
Unique material and shape using cutting edge technology to demonstrate high performance.Configure nowStarting from∗ ： 22.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Front Milling Octagon Type Bore Type
OSG
It is shaped to combine high rigidity and sharp cutting performance due to the negative cutting edge shape and positive clearance angle.Configure nowStarting from∗ ： 28.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Ball End Mills for Finishing
OSG
The high mounting accuracy of the body allows for a good machined surface and long tool life. Can be selected according to the application.- Volume Discount
Configure nowStarting from∗ ： 45.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Radius End Mills for Finishing
OSG
It is an insert with high corner radius accuracy, fully profiled bottom edge and special treatment to improve cutting edge strength. Good machining accuracy can be achieved.- Volume Discount
Configure nowStarting from∗ ： 35.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Round Cutters
OSG
An insert for OSG-PHENIX PCR. Can be adjusted according to the notch of the inserts.- Volume Discount
Configure nowStarting from∗ ： 12.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series 4-Corner Shoulder Cutting Cutters
OSG
A positive square insert with 4 corners. A compact insert suitable for shallow depths of cut.Configure nowStarting from∗ ： 11.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Front Milling Square Type
OSG
The positive chipbreaker achieves high rigidity and reduced cutting force. Compatible with a wide range of machining operations from roughing to finishing.- Volume Discount
Configure nowStarting from∗ ： 28.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
PHC Tips for Phoenix Series High Feed Radius Cutters
OSG
Economical due to the use of 4 corners. Crusher shape emphasises sharpness while maintaining cutting rigidity.Configure nowStarting from∗ ： 13.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tips for Phoenix Series Front Milling Octagon Type
OSG
It is shaped to combine high rigidity and sharp cutting performance due to the negative cutting edge shape and positive clearance angle.Configure nowStarting from∗ ： 29.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
(Integrated) Insert for CoroMill 331 (Part Number List)
SANDVIK
A high-precision multi-purpose side milling cutter. [Features]·Diameter 40-315 mm· Shipped with the edge width tolerance preset to ±0.01 mm· Radial runout is ±0.02 mm.· Wide pocket· Strong clamping by wedge· Serration method· Adjustment range is 2-3 mm.· Unique spring-loaded mechanism for smooth adjustment and slip preventionConfigure nowStarting from∗ ： 32.56 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Wiper Insert For CoroMill 345 - PW5, KW5PW8, KW8
SANDVIK
First choice for face milling machine with high productivity
8-corner inserts have achieved high cost-effective machiningConfigure nowStarting from∗ ： 37.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 88.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 45.50 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Grooving Insert For CoroMill 327 - Full R
SANDVIK
Wide range of sharp cutting edges for low cutting forces and high quality burr-free grooving, and shank lengths and diameters are availableConfigure nowStarting from∗ ： 90.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 90.91 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 113.82 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 106.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 88.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 88.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Threading Insert for CoroMill 328
SANDVIK
For circlip grooving of holes with larger than 39 mm in diameter
Sharp cutting edge for precision groovesConfigure nowStarting from∗ ： 115.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 59.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 47.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert For CoroMill 210 - R210-E-M
SANDVIK
[Features]
Insert for CoroMill 210.
Carbide-coated insert.
Can be used for high feed machining.
For milling of high-hardness materials
For high-feed machining
For plungingConfigure nowStarting from∗ ： 25.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Grooving Insert For CoroMill 327 - 327R-GMM
SANDVIK
[Features]
Insert for CoroMill 327.
A sharp blade tip for high-precision grooving.
Suitable for all types of work material.
For grooving with a milling cutter.Configure nowStarting from∗ ： 112.10 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Insert For CoroMill R216 Ball End Mill, R216-E-M
SANDVIK
[Features]
Allows for high cutting conditions
The same inserts are used for the center blade and peripheral cutting edge
For profiling
For molding
Ideal for everything from roughing right through to semi-finishing-type profilingConfigure nowStarting from∗ ： 69.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 19.75 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 46.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kyocera Turning Insert TN620 Cermet
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningConfigure nowStarting from∗ ： 14.22 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Kyocera Insert for Milling, Cermet TN100M
KYOCERA
[Features]
· TN100M: Tough cermet for milling.
· The oxidation resistance has improved, as has the thermal shock resistance, by a significant amount.
· Suppresses oxidation wear in high-speed milling of steel.
[Applications]
· For Milling
· TN100M: Cermet for steel and die steel high speed millingConfigure nowStarting from∗ ： 8.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningConfigure nowStarting from∗ ： 17.57 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Sandvik Coro-Mill 327 Grooved, Full R Tip 1025
SANDVIK
[Features]
· CORO-MILL 327 tip.
· Sharp blade tip for high-precision grooves.
· Supports any kind of workpiece.
[Applications]
· For full radius groove machining with milling cutter.Configure nowStarting from∗ ： 90.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 21.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Mirror Radius Insert FRM Type
DIJET
"Mirror Radius RNM/MRN" insert for high-speed high-efficiency machining of molds, usable for medium finishing to finishing and also supports high hardness materials.
· [Features]
· Uses new material "DH102," a combination of "New DH (Dijet Hard) Coating" (a new PVD coating for hardened materials and high speed machining) and a micrograin ultra-hard alloy for hardened materials to attain long-life use. JC8015 material is available for general steel, etc.
· A positive blade shape is used, like the conventional HRM type, with low cutting resistance and favorable cutting quality.
· Tools can be consolidated by using 1 holder and changing the insert, handling from rough machining to finishing of any work material.Configure nowStarting from∗ ： 90.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Throw-Away Insert For End Mill CZH-140 / 141
NGK SPARK PLUG
Insert for indexable end mills.
Shape (initial letter of part number): others
Specifications: center blade
Compatible holder: REZ type
Wiper yes/no: with wiperConfigure nowStarting from∗ ： 30.59 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】
WIDIA
Chamfer mill, M25 Series, Insert, SDMW [10 Pcs. Included]
[Specifications]
Shape (initial letter of part number): S (square)
Relief angle: D (15°)
Work material: cast Iron / non-ferrous metals / heat resistant alloys, titanium alloys
Number of available corners: 4
Cutting edge length (mm): 9.53
Thickness (mm): 3.18
Grade: THMConfigure nowStarting from∗ ： 16.76 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Insert For End Mills For Automatic Lathes MT-CP
THE CUT
[Dedicated Insert]
*5 inserts are contained in 1 case.
* The cutting conditions are for general guidance.
They are subject to change to the situation of the machine used, the rigidity of the chuck, cutting fluid, etc.
·Part number: MT-CP040102R-RH-CEM1
Supported work material: steel other than non-ferrous metal
·Part number: MT-CP040102R-SE-MK10
Supported work material: cast iron, non-ferrous metal
·Part number: MT-CP040102R-RH-VP20
Supported work material: steel and Rostfreier Stahl other than non-ferrous metalConfigure nowStarting from∗ ： 18.33 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 30.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Configure now
Min. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 34.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： Quote -
Configure now
Starting from∗ ： 81.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 72.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Shape (initial letter of model number) |
| Clearance angle |
| work material |
| Available corners |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | SANDVIK | DIJET | DIJET | NGK SPARK PLUG | WIDIA | THE CUT | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Thread Milling Insert For CoroMill 327 (For Tapping), V-Shaped 60° | Peripheral Cutting Edge Insert For Long-Edge Cutter For Finishing | Insert For Interchangeable-Blade-Type Face Milling Cutter CoroMill 345 - 345R | Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 33.10 € *Unit price with basic configuration | 22.58 € *Unit price with basic configuration | 28.00 € *Unit price with basic configuration | 45.20 € *Unit price with basic configuration Volume Discount | 35.00 € *Unit price with basic configuration Volume Discount | 12.80 € *Unit price with basic configuration Volume Discount | 11.60 € *Unit price with basic configuration | 28.50 € *Unit price with basic configuration Volume Discount | 13.30 € *Unit price with basic configuration | 29.60 € *Unit price with basic configuration | 32.56 € *Unit price with basic configuration | 37.80 € *Unit price with basic configuration | 88.06 € *Unit price with basic configuration | 45.50 € *Unit price with basic configuration | 90.51 € *Unit price with basic configuration | 90.91 € *Unit price with basic configuration | 113.82 € *Unit price with basic configuration | 106.45 € *Unit price with basic configuration | 88.62 € *Unit price with basic configuration | 88.62 € *Unit price with basic configuration | 115.17 € *Unit price with basic configuration | 59.24 € *Unit price with basic configuration | 47.39 € *Unit price with basic configuration | 25.40 € *Unit price with basic configuration | 112.10 € *Unit price with basic configuration | 69.87 € *Unit price with basic configuration | 19.75 € *Unit price with basic configuration | 46.42 € *Unit price with basic configuration | 14.22 € *Unit price with basic configuration | 8.68 € *Unit price with basic configuration | 17.57 € *Unit price with basic configuration | 90.51 € *Unit price with basic configuration | 21.96 € *Unit price with basic configuration | 90.48 € *Unit price with basic configuration | 30.59 € *Unit price with basic configuration | 16.76 € *Unit price with basic configuration | 18.33 € *Unit price with basic configuration | 30.77 € *Unit price with basic configuration | - | - | 34.88 € *Unit price with basic configuration | - | 81.38 € *Unit price with basic configuration | 72.69 € *Unit price with basic configuration | - |
| Min. Shipping Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 9 Days | 6 Days | 9 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | Quote | 5 Days | 5 Days | 5 Days |
| Shape (initial letter of model number) | P (Regular pentagon) | S (Square) | O (Regular octagon) | Other | Other | R (Circular) | S (Square) | S (Square) | S (Square) | Other | Other | Other | P (Regular pentagon) | S (Square) | Other | Other | Other | Other | T (Equilateral Triangle Type) | T (Equilateral Triangle Type) | T (Equilateral Triangle Type) | Other | S (Square) | S (Square) | Other | Other | L (Rectangular) | S (Square) | - | - | - | Other | - | Other | Other | S (Square) | Other | - | - | - | - | - | - | - | - |
| Clearance angle | N (0°) | P (11°) | Other | - | - | P (11°) | D (15°) | N (0°) | D (15°) / Other | Other | N (0°) | N (0°) | N (0°) | N (0°) | Other | Other | Other | Other | N (0°) | N (0°) | Other | E (20°) | Other | C (7°) | Other | Other | P (11°) | N (0°) | - | - | - | Other | - | Other | - | D (15°) | - | Other | N (0°) | - | Other | P (11°) | - | - | N (0°) |
| work material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Available corners | 5 | 4 | - | - | - | 8 | - | - | - | - | 2 | 5 | 5 | 4 | 3 | 3 | 3 / 6 | 3 | 3 | 3 | 3 | 1 | 4 | 4 | 6 | 2 | 4 | 4 | - | - | - | 3 | - | - | - | 4 | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Shape (initial letter of model number)
- O (Regular octagon)
- P (Regular pentagon)
- S (Square)
- T (Equilateral Triangle Type)
- C (80° Diamond-Shape)
- E (75°Diamond Shape)
- A (85° parallelogram)
- B (82° Parallelogram)
- L (Rectangular)
- W (Hexagonal Type)
- R (Circular)
- Other
-
Clearance angle
- C (7°)
- P (11°)
- D (15°)
- E (20°)
- F (25°)
- N (0°)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Available corners
- 1
- 2
- 3
- 4
- 5
- 6
- 8
- Other
Brand
CAD data type
-
- 2D
- 3D
Categories related to Inserts (for Milling)
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.