Screw-Hole-Related Tools（Coating Type：Other）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing ends 30/11/2024

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series X Performer Long Shank LT-S-XPF

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

OSG

The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

IT-Toughlet C Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	24.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

OSG

Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

Select to compare

Configure now
Starting from^∗ ：	22.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.33 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

OSG

Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap remover Plus (regular size)

EIKOSHA

Dedicated drill for removing broken high speed steel taps

Select to compare

Configure now
Starting from^∗ ：	99.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap remover Plus (long size)

EIKOSHA

Dedicated drill for removing broken high speed steel taps

Select to compare

Configure now
Starting from^∗ ：	104.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Stainless Steel-Use Spiral Tap

ISHIHASHI

Friction torque has been reduced through the specially designed shape and special secondary processing. Oxidation treatment finishing prevents welding.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Drilling Tap

ISHIHASHI

This type is equipped with a drill at the tip so that screw pilot hole drilling and tapping can be performed simultaneously.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	46.49 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	23.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series

SANDVIK

[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Oxidized type with excellent welding resistance.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials:
Stainless steel or steel.
[Material]
· High-Speed Steel (HSS-E)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

I Series Point Tap IPO Blister Pack

YAMAWA MFG

[Features]
· Through-hole tap for low speed machining with a drilling machine.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.
· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SU Roll Tap SURZ

YAMAWA MFG

[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.44 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL

YAMAWA MFG

[Features]
· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
· Improves the surface roughness of female threads.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.30 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Premium Thread Mill PRML

YAMAWA MFG

[Features]
· Dedicated tool for female thread machining.

Select to compare

Configure now
Starting from^∗ ：	128.63 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Oxidized Point Tap For High Carbon Steel HC-PO OX

YAMAWA MFG

[Features]
· A point tap suitable for tapping high carbon steel varieties such as S55C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.81 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long-Shank Short-Spiral Tap For Stainless Steel LS-SU-S-SP

YAMAWA MFG

[Features]
· A long-shank short-spiral tap for stainless steel; ideal for machining pilot holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.26 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

YAMAWA MFG

[Features]
· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF

YAMAWA MFG

[Features]
· A spiral tap. Suitable for machining stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.39 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	TANOI MFG	OSG	OSG	OSG	OSG	OSG	OSG	EIKOSHA	EIKOSHA	ISHIHASHI	ISHIHASHI	OSG	SANDVIK	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	A Tap Series, Spiral Tap, A-SFT	A Tap Series for Pipes Point Tap A-POT	Groove-Free Tap Series X Performer Long Shank LT-S-XPF	Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC	IT-Toughlet C Coated	Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Spiral Tap Series, V Coated, V-SFT	Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT	Tap remover Plus (regular size)	Tap remover Plus (long size)	Stainless Steel-Use Spiral Tap	Drilling Tap	A Tap Series Point Tap Long Shank A-LT-POT	Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series	I Series Point Tap IPO Blister Pack	SU Roll Tap SURZ	Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL	Premium Thread Mill PRML	Oxidized Point Tap For High Carbon Steel HC-PO OX	Long-Shank Short-Spiral Tap For Stainless Steel LS-SU-S-SP	Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO	Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF
Starting from^∗	16.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	25.83 € *Unit price with basic configuration Volume Discount	101.50 € *Unit price with basic configuration Volume Discount	38.28 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	24.10 € *Unit price with basic configuration Volume Discount	24.50 € *Unit price with basic configuration	22.41 € *Unit price with basic configuration	28.34 € *Unit price with basic configuration	17.33 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	83.15 € *Unit price with basic configuration	99.15 € *Unit price with basic configuration	104.74 € *Unit price with basic configuration	16.48 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	46.49 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	23.65 € *Unit price with basic configuration	31.33 € *Unit price with basic configuration Volume Discount	13.98 € *Unit price with basic configuration	37.44 € *Unit price with basic configuration Volume Discount	37.30 € *Unit price with basic configuration Volume Discount	128.63 € *Unit price with basic configuration	16.81 € *Unit price with basic configuration Volume Discount	32.26 € *Unit price with basic configuration Volume Discount	32.26 € *Unit price with basic configuration Volume Discount	39.39 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	6 Days	8 Days	8 Days	8 Days	8 Days	7 Days	6 Days	8 Days
Screw Types	Meter / Unified	Meter / Unified	Meter	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	-	Meter	Meter	Meter	Meter	Meter	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Parallel for Pipes
Screw size (Nominal)	1-8UNC ～ M56	1/2-20UNF ～ M24	M3 ～ M12	-	M1 ～ M10	M3 ～ M16	M2 ～ M24	M4 ～ M8	M8	M2 ～ M16	M2 ～ M20	M3 ～ M24	M3 ～ M12	M2.6 ～ M4	M4	M2 ～ M24	M5 ～ M10	-	No.2 ～ No.6	-	3.5 ～ 9	M6 ～ M8	M3 ～ M24	M3 ～ M24	PF 1 ～ PF 3/8
Pitch (P), Number of Threading(mm)	0.25 ～ 5.5	0.25 ～ 3	0.5 ～ 1.75	0.25 ～ 32	0.2 ～ 1.5	0.5 ～ 2	0.25 ～ 3	0.7 ～ 1.25	1.25	0.4 ～ 2	0.4 ～ 2.5	-	-	0.45 ～ 0.7	0.7	0.25 ～ 3	0.8 ～ 1.5	-	0.2 ～ 56	-	1	1 ～ 1.25	0.5 ～ 3	0.5 ～ 3	11 ～ 28
Chamfer threads (Lcf)	1.5P ～ 2.5P	5P	-	-	1P ～ 4P	3P	2.5P	2.5P	5P	2.5P	3P	-	-	-	-	5P	2P	5P	2P	5P ～ 7P	-	5P	2.5P	4.5P ～ 5P	2.5P
Tool Material Type	Powder high-speed steel / Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	Carbide	Carbide	-	-	Powder high-speed steel	-	High-speed steel	Powder high-speed steel	Cobalt HSS	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Hardness Steel (50-60 HRC)[◎]	-	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]
Tap Type	Spiral Tap	Point tap	Roll tap	Thread cutter	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Hand Tap	Modification/removal Tool	Modification/removal Tool	Spiral Tap	Thread-Cutting-Related Tool	Point tap	Spiral Tap	Point tap	Roll tap	Spiral Tap	Thread cutter	Point tap	Spiral Tap	Point tap	Spiral Tap
Hole type	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	-	For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For through hole / For blind hole	-	-	-	-	For through hole	For blind hole	For through hole	For blind hole	For through hole	-	For through hole	For blind hole	For through hole	For blind hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other
Overall Length (L)(mm)	34 ～ 250	34 ～ 120	80 ～ 150	40	30 ～ 75	46 ～ 95	80 ～ 200	52 ～ 70	70	40 ～ 95	40 ～ 105	40 ～ 120	40 ～ 80	44 ～ 52	62	80 ～ 200	60 ～ 75	-	-	-	-	62 ～ 70	100 ～ 200	100 ～ 200	59 ～ 109

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No0UN

NO.0-80UNF

No.0-80UNF

No.10

S0.1

NO.1-72UNF

No.1-72UNF

NO.1-64UNC

No.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12-32UNEF

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-40UNF

No.6-32UNC

S0.7

No.8

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1"

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

PT 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-20UNEF

1´-14UNS

1'-12UNF

1´-12UNF

1´-11

1′-11

1-8UNC

1'-8UNC

1´-8UNC

G1"-3"

1"1/2UN

1"1/2

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1´1/2-11

1′1/2-11

1 1/2-8UN

1"1/4UN

1"1/4

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1´1/4-11

1′1/4-11

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1´ 1/8-7UNC

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-28UNEF

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1/2W12

1 3/4

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1′3/4-11

1 3/4-8UN

1 3/8

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PS 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-32UNEF

1/4-28UNF

1/4-20UNC

1/4-19

1/4W20

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1'W8

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PF 1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/8SM40

1/8SM44

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

1/16-28

1/16SM80

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2"

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2´-11

2′-11

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

2′1/2-11

W2"1/4

M2.2

M2.3

M2.5

M2.6

3M

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

UNC 3

UNF 3

3′-11

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-20UNEF

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-32UNEF

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

3/16SM24

3/16W24

3/16SM28

3/16SM32

3/16SM40

M3 - M18

SM3/32

3/32SM56

3/32SM100

3.5

M3.5

4

4M

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

5M

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8

5/8UN

G5/8

G 5/8

NPS5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-24UNEF

5/8-18UNF

5/8-11UNC

G5/8 3/4

5/8W11

M5 - M12

M5～13

5/16

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-32UNEF

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5/64SM64

5.5M

M5.5

6

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

No6-40UNF

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8

7/8UN

G7/8

G 7/8

NPS7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-20UNEF

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-28UNEF

7/16-20UNF

7/16-14UNC

7/16W14

SM7/32

7.5

M7.5

EGM 8

M8

MF8

No8UN

STI M8

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

9

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

9/64SM40

M9.5

EGM 10

M10

MF10

No10UN

STI M10

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

PG11

SM11/32

SM11/64

11/64SM40

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

15/64SM28

M16

MF16

Mf16

PG16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M21

PG21

M22

M22X

MF22

Tr 22

M23

M24

M24X

MF24

Tr 24

M25

M25X

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

PG29

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M46

M48

M50

M52

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5

1.5-Shaped

1.5 P

1.5P

2

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

3.5P

4

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

7P

8P

9 P

9P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

41.5

42

44

44.5

45

46

47.62

47.625

48

49

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

61.5

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

230

250

260

270

280

290

300

310

315

460
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (11)
- YAMAWA MFG (8)
- EIKOSHA (2)
- ISHIHASHI (2)
- SANDVIK (1)
- TANOI MFG (1)
- NACHI(FUJIKOSHI) (0)
- SKC (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear

CAD data type

- 2D
- 3D
Clear

Screw-Hole-Related Tools（Coating Type：Other）

Search by sub-category

A Tap Series, Spiral Tap, A-SFT

A Tap Series for Pipes Point Tap A-POT

Groove-Free Tap Series X Performer Long Shank LT-S-XPF

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

IT-Toughlet C Coated

Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

Spiral Tap Series, V Coated, V-SFT

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

Tap remover Plus (regular size)

Tap remover Plus (long size)

Stainless Steel-Use Spiral Tap

Drilling Tap

A Tap Series Point Tap Long Shank A-LT-POT

Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series

I Series Point Tap IPO Blister Pack

SU Roll Tap SURZ

Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL

Premium Thread Mill PRML

Oxidized Point Tap For High Carbon Steel HC-PO OX

Long-Shank Short-Spiral Tap For Stainless Steel LS-SU-S-SP

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF

Categories related to Screw-Hole-Related Tools

Método de pago

Fabricación bajo demanda

Cambiar de vista

Certificados

MISUMI en todo el mundo

Redes sociales

Nota Legal