Spiral Taps（Hole type：For blind hole Page 2）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Spiral Tap for Aluminum AL+SP / AL-SP

YAMAWA MFG

A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.59 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Flute Tap SP (N-SP)

YAMAWA MFG

The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Plus Series Spiral Tap +SP (N+SP)

YAMAWA MFG

A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

Select to compare

Configure now
Starting from^∗ ：	11.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coating Spiral Tap AU+ SP

YAMAWA MFG

Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)

YAMAWA MFG

* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

Select to compare

Configure now
Starting from^∗ ：	46.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For High Carbon Steel HC+SP / HC-SP

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX

YAMAWA MFG

Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.36 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap For Soft Steel / Esper E-SP

YAMAWA MFG

A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	24.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series

SANDVIK

[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Oxidized type with excellent welding resistance.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials:
Stainless steel or steel.
[Material]
· High-Speed Steel (HSS-E)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Claw Tap 300 TiCN Coating (for Metal Screws)

SANDVIK

The taps are available for every material, which makes selection easier.
Hole type: For blind holes
Coating: Surface treatment for steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type)

SANDVIK

[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials: Steel.
[Material]
· High-Speed Steel (HSS-E)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

N Spiral Tap NSP

NACHI(FUJIKOSHI)

[Features]
It can be used for machining threaded holes.
[Features]
This product can be used universally as it is not treated and its spiral groove can drain chips.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap for Aluminum AL-SP 1.5P

YAMAWA MFG

[Features]
· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF

YAMAWA MFG

[Features]
· A spiral tap. Suitable for machining stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	54.98 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare
Brand	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	SANDVIK	SANDVIK	SANDVIK	NACHI(FUJIKOSHI)	YAMAWA MFG	YAMAWA MFG
Product Series	Spiral Tap for Aluminum AL+SP / AL-SP	Spiral Flute Tap SP (N-SP)	Plus Series Spiral Tap +SP (N+SP)	Coating Spiral Tap AU+ SP	Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)	Spiral Tap For High Carbon Steel HC+SP / HC-SP	Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX	Spiral Tap For Soft Steel / Esper E-SP	Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W	Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series	Spiral Tap Claw Tap 300 TiCN Coating (for Metal Screws)	Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type)	N Spiral Tap NSP	Spiral Tap for Aluminum AL-SP 1.5P	Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF
Starting from^∗	13.59 € *Unit price with basic configuration	8.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.10 € *Unit price with basic configuration	22.80 € *Unit price with basic configuration Volume Discount	46.39 € *Unit price with basic configuration	11.48 € *Unit price with basic configuration Volume Discount	11.36 € *Unit price with basic configuration Volume Discount	12.18 € *Unit price with basic configuration Volume Discount	9.74 € *Unit price with basic configuration Volume Discount	24.10 € *Unit price with basic configuration Volume Discount	24.50 € *Unit price with basic configuration	31.33 € *Unit price with basic configuration Volume Discount	44.15 € *Unit price with basic configuration Volume Discount	48.07 € *Unit price with basic configuration Volume Discount	8.72 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.39 € *Unit price with basic configuration Volume Discount	54.98 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	5 Days	6 Days	Same day	6 Days	8 Days
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Parallel for Pipes
Screw size (Nominal)	M3 ～ M4	M3 ～ M12	M2 ～ M6	M2 ～ M12	M3	M3 ～ M10	M3 ～ M12	M4 ～ M10	W1/8	M3 ～ M24	M2 ～ M24	M5 ～ M10	M3 ～ M24	M4 ～ M10	M4	-	PF 1 ～ PF 3/8
Pitch (P), Number of Threading(mm)	0.5 ～ 0.7	0.5 ～ 1.25	0.4 ～ 1	0.4 ～ 1.75	0.5	0.5 ～ 1.5	0.5 ～ 1.75	0.7 ～ 1.5	40	0.5 ～ 3	0.25 ～ 3	0.8 ～ 1.5	0.5 ～ 3	0.7 ～ 1.5	0.7	-	11 ～ 19
Chamfer threads (Lcf)	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	2.5P	2P	2P	2.5P	2.5	1.5P	2.5P
Tool Material Type	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	-	-	-	High-speed steel	High-speed steel	High-speed steel
work material	Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	N/A	N/A	N/A	Available	N/A	N/A	N/A	N/A	N/A	Available / N/A	Available	Available	Available	Available	N/A	Available	Available
Coating Type	-	-	-	TiN	-	-	-	-	Non-Coated	Non-Coated / Other	Other	Other	TiCN	TiN	Non-Coated	Nitriding Treatment	Other
Overall Length (L)(mm)	46 ～ 52	46 ～ 82	42 ～ 62	42 ～ 82	100	46 ～ 75	46 ～ 82	52 ～ 75	46	46 ～ 120	80 ～ 200	60 ～ 75	46 ～ 120	52 ～ 75	52	-	67 ～ 109

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Trapezoid
Clear

Screw size (Nominal)
No.10-32UNF

No.10-24UNC

No.2-56UNC

No.4-40UNC

No.5-40UNC

No.6-32UNC

1UN

1UNS

G 1"

M1

PF 1

UNC 1"

UNF 1"

W1

1-8UNC

1'-8UNC

1"1/2UN

1 1/2-8UN

1"1/4UN

1 1/4-8UN

1"1/8UN

1 1/8-8UN

1/2UN

G 1/2

PF 1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1"3/4UN

1 3/4-8UN

1"3/8UN

1 3/8-8UN

1/4UN

G 1/4

PF 1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1 5/8-8UN

1 7/8-8UN

G 1/8

SM1/8

W1/8

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

M1.4

M1.6

M1.7

M1.8

M2

UNC 2

2-8UN

M2.2

M2.3

M2.5

M2.6

M3

3/4UN

G 3/4

PF 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/8UN

G 3/8

PF 3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-16UNC

M3 - M10

M3 - M12

SM3/16

W3/16

SM3/32

M3.5

M4

MF4

No4UN

UNC 4

UNF 4

№4-40UNC

M4.5

M5

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G 5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

M5.5

M6

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

G 7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

M8

MF8

No8UN

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M10

MF10

No10UN

Tr10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

Tr12

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

M15

SM15/64

M16

MF16

Mf16

Tr16

M16 x 1.5

M17

M18

MF18

Tr18

M19

M20

MF20

Mf20

M20 x 1.5

M22

MF22

M23

M24

MF24

M25

MF25

Mf25

M25 x 1.5

M26

MF26

M27

MF27

M28

MF28

M30

MF30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

18

19

20

24

28

32

36

40

44

48

56
Clear

Chamfer threads (Lcf)
1.5 P

1.5P

2P

2.5

2.5 P

2.5P

3P

5P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.62

48

49.21

50

50.8

51

52

53

53.98

55

55.28

55.64

55.92

56

58

59

60

60.32

62

62.52

62.65

63

63.5

65

66

67

69.06

69.42

69.71

70

72

74.61

75

79.03

79.31

80

80.17

82

85

85.72

87

88

89

89.12

89.18

90

91.28

95

96

96.84

98.97

99.21

100

102

105

108

109

109.65

110

112

113.5

115

118

119

120

125

130

130.175

130.2

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

220

224

225

250

300

315
Drawing

Clear

Brand

- MISUMI (5)
- Cost Efficient Products ()
- OSG (30)
- YAMAWA MFG (19)
- NACHI(FUJIKOSHI) (4)
- SANDVIK (3)
- TRUSCO NAKAYAMA (1)
- WERA (0)
- FEIN (0)
- BERNSTEIN AG (0)
- RUKO (0)
- SKC (0)
- STAHLWILLE (0)
- ISHIHASHI (0)
- GEDORE (0)
- WALTER PROTOTYP (0)
- ESCO (0)
- HAZET (0)
- REX TOOLS (0)
Clear