Spiral Taps（Screw size (Nominal)：M22）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	84.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	102.00 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	102.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	73.05 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

OSG

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.71 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.92 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap insert

FEIN

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	224.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	SANDVIK	OSG	OSG	OSG	OSG	OSG	SANDVIK	OSG	OSG	FEIN
Product Series	Spiral Tap Series, for Stainless EX-SUS-SFT	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	A Tap Series, Spiral Tap, A-SFT	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Spiral Tap Series, General Purpose EX-SFT	Spiral Tap Series, Short Chamfer Type, EX-SC-SFT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	SANDVIK CoroTap 200 Cutting Tap with Spiral Point	Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Tap insert
Starting from^∗	84.71 € *Unit price with basic configuration Volume Discount	-	102.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	102.00 € *Unit price with basic configuration	73.05 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	78.71 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	115.92 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	87.00 € *Unit price with basic configuration Volume Discount	87.00 € *Unit price with basic configuration Volume Discount	224.64 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	5 Days	6 Days	6 Days	Same day	6 Days	6 Days	5 Days	6 Days	6 Days	7 Days
Specifications					Stock
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-
Screw size (Nominal)	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22 ～ M24
Pitch (P), Number of Threading(mm)	1.5 ～ 2.5	-	1 ～ 2.5	1 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	-	1.5 ～ 2.5	1.5 ～ 2.5	-
Chamfer threads (Lcf)	2.5P	-	2.5P	2.5P	2.5P	1.5P	3P	-	2.5P	2.5P	-
Tool Material Type	Vanadium High-Speed Steel	-	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-
work material	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	-	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-
Tap Type	Spiral Tap	-	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	-	Spiral Tap	Spiral Tap	-
Hole type	For blind hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	For blind hole	For blind hole	-
Coating Y/N	N/A	-	Available	Available	N/A	N/A	N/A	-	N/A	N/A	-
Coating Type	Non-Coated	-	Other	Other	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	-
Overall Length (L)(mm)	115	118 ～ 140	115	150	115	115	115	118 ～ 140	150	150 ～ 250	-

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
Clear

Screw size (Nominal)
No.10-32UNF

No.10-24UNC

No.2-56UNC

No.4-40UNC

No.5-40UNC

No.6-32UNC

1UN

1UNS

G 1"

M1

PF 1

UNC 1"

UNF 1"

W1

1-8UNC

1'-8UNC

1"1/2UN

1 1/2-8UN

1"1/4UN

1 1/4-8UN

1"1/8UN

1 1/8-8UN

1/2UN

G 1/2

PF 1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1"3/4UN

1 3/4-8UN

1"3/8UN

1 3/8-8UN

1/4UN

G 1/4

PF 1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1 5/8-8UN

1 7/8-8UN

G 1/8

SM1/8

W1/8

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

M1.4

M1.6

M1.7

M1.8

M2

UNC 2

2-8UN

M2.2

M2.3

M2.5

M2.6

M3

3/4UN

G 3/4

PF 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/8UN

G 3/8

PF 3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-16UNC

M3 - M10

M3 - M12

SM3/16

W3/16

SM3/32

M3.5

M4

MF4

No4UN

UNC 4

UNF 4

№4-40UNC

M4.5

M5

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G 5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

M5.5

M6

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

G 7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

M8

MF8

No8UN

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M10

MF10

No10UN

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M20 x 1.5

M22

MF22

M23

M24

MF24

M25

MF25

Mf25

M25 x 1.5

M26

MF26

M27

MF27

M28

MF28

M30

MF30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

18

19

20

24

28

32

36

40

44

48

56
Clear

Chamfer threads (Lcf)
1.5 P

1.5P

2P

2.5

2.5 P

2.5P

3P

5P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.62

48

49.21

50

50.8

51

52

53

53.98

55

55.28

55.64

55.92

56

58

59

60

60.32

62

62.52

62.65

63

63.5

65

66

67

69.06

69.42

69.71

70

72

74.61

75

79.03

79.31

80

80.17

82

85

85.72

87

88

89

89.12

89.18

90

91.28

95

96

96.84

98.97

99.21

100

102

105

108

109

109.65

110

112

113.5

115

118

119

120

125

130

130.175

130.2

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

220

224

225

250

300

315
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (8)
- SANDVIK (2)
- FEIN (1)
- WERA (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- TRUSCO NAKAYAMA (0)
- GEDORE (0)
- NACHI(FUJIKOSHI) (0)
- ESCO (0)
- HAZET (0)
- YAMAWA MFG (0)
- REX TOOLS (0)
Clear