Chamfer, V-Grooves（work material：General Steel Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
GCCC for Carbide Center Chamfering
SANKO MFG
[Features]
· Melding the design concepts of endmills and drills, it is available for a wide range of applications.
· Double angle adopted for the chamfer part.
· Provides a clean finish with fewer burrs.Configure nowStarting from∗ ： 146.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 60° Carbide
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 94.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° Carbide
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 79.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° Carbide Long Type
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 104.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Angular Cutter with TAG Handle G2
ASAHI TOOLS
Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table grooveConfigure nowStarting from∗ ： 162.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI SEIKO
1-flute type. For steel and stainless steel. All products are TiN coated.- Volume Discount
Configure nowStarting from∗ ： 371.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.- Volume Discount
Configure nowStarting from∗ ： 102.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SVM Chamfering Mill, Non-Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.- Volume Discount
Configure nowStarting from∗ ： 83.38 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SVMA Chamfering Mill, OK Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.Configure nowStarting from∗ ： 104.53 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 106.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NEW Chamfering Drill
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy positioning.
· Uses Cobalt HSS- Volume Discount
Configure nowStarting from∗ ： 53.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 108.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 23.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 106.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMC-4
KYOWA SEIKO
4 straight cutting edges.
45° (one-sided angle)
Material, general steel/heat-treated steel/stainless steel/cast iron/aluminium
Single-edged blade
Tool grade, carbideConfigure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight cutting edges.
90° (including angle type)
Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/Resin
Single-edged blade
Tool quality, carbide.Configure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 117.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SPEED / T, 2-Flute, Multi 90°
SPEED TIGER
[Features]
· Blade diameters φ10 or less are high rigidity types with thick shank diameter.
· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.Configure nowStarting from∗ ： 42.39 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.Configure nowStarting from∗ ： 47.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Blade for Chamfer / Deburring【1-10 Pieces Per Package】
NOGAJAPAN
[Features]
One blade for chamfering and deburring.
Compatible base body: compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200).- Volume Discount
Configure nowStarting from∗ ： 31.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Center Reamer CF
DAIICHITOOL
[Features]
A centre reamer with an overall length of 45 to 99 mm and a handle diameter of 6 to 12 mm.Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Coat XPM 2-Flute (V-Cut Type) V-XPM-VCM
OSG
[Specifications]
· Shanks with diameter 25 mm or more are shanks with 2 flattened cutouts.- Volume Discount
Configure nowStarting from∗ ： 81.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure nowStarting from∗ ： 111.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Configure nowStarting from∗ ： 93.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 104.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 104.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 118.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 118.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 118.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Standard Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.Configure nowStarting from∗ ： 110.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Standard Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.Configure nowStarting from∗ ： 110.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Long Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.Configure nowStarting from∗ ： 145.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANKO MFG | IWATA TOOL | IWATA TOOL | IWATA TOOL | ASAHI TOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | NT TOOL | EIKOSHA | EIKOSHA | EIKOSHA | KYOWA SEIKO | KYOWA SEIKO | SANDVIK | SPEED TIGER | 7 LEADERS | NOGAJAPAN | DAIICHITOOL | OSG | OSG | OSG | OSG | OSG | NS TOOL | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY |
| Product Series | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000 | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | |||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 146.60 € *Unit price with basic configuration | 94.31 € *Unit price with basic configuration | 79.43 € *Unit price with basic configuration | 104.35 € *Unit price with basic configuration | 162.11 € *Unit price with basic configuration | 371.94 € *Unit price with basic configuration Volume Discount | 102.41 € *Unit price with basic configuration Volume Discount | 83.38 € *Unit price with basic configuration Volume Discount | 104.53 € *Unit price with basic configuration | 106.60 € *Unit price with basic configuration | 53.24 € *Unit price with basic configuration Volume Discount | 108.97 € *Unit price with basic configuration | 23.20 € *Unit price with basic configuration Volume Discount | 106.30 € *Unit price with basic configuration | 109.96 € *Unit price with basic configuration | 109.96 € *Unit price with basic configuration | 117.96 € *Unit price with basic configuration | 42.39 € *Unit price with basic configuration | 47.43 € *Unit price with basic configuration | 31.82 € *Unit price with basic configuration Volume Discount | 33.97 € *Unit price with basic configuration | 81.11 € *Unit price with basic configuration Volume Discount | 79.82 € *Unit price with basic configuration | 79.82 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration | 111.08 € *Unit price with basic configuration | 93.69 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 104.69 € *Unit price with basic configuration | 104.69 € *Unit price with basic configuration | 118.22 € *Unit price with basic configuration | 118.22 € *Unit price with basic configuration | 118.22 € *Unit price with basic configuration | 110.84 € *Unit price with basic configuration | 110.84 € *Unit price with basic configuration | 145.35 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 7 Days | 6 Days | 5 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days |
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Hole Chamfer | Hole Chamfer | Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal / V Groove / Drilling / Other | Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Drilling | Hole Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Other | Centering (Positioning) | - | Chamfering/Horizontal | - | - | - | Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer |
| Tip angle (θ) | - | 60 | 90 | 90 | 45° ～ 60° | 90 | 90 | 90 ～ 120 | 90 ～ 120 | 60 ～ 90 | 90 | - | 90 ～ 135 | 60 ～ 90 | - | - | - | 90 | 90 | - | 60° ～ 90° | 90 | 90° | - | - | - | 45° | 60 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 90 | 120 | 60 | 90 | 120 | 90 | 120 | 90 |
| Tool Diameter (D)(mm) | 10 | 1.2 ～ 16 | 1.2 ～ 16 | 3 ～ 12 | 15 ～ 100 | 66 | 20 | 3 ～ 20 | 3 ～ 20 | 5 ～ 12 | - | - | 3 ～ 25 | 15 ～ 100 | - | - | 6 ～ 20 | 3 ～ 20 | 0.5 ～ 20 | - | 6 ～ 50 | 3 ～ 6 | - | - | - | - | 4 ～ 6 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 |
| work material | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] |
| Single blade, two blades | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade / Double-edged | - | - | - | Single blade | Single blade | Single blade | Double-edged | - | - | Single blade | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | Available | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | - | N/A | - | - | - | - | - | N/A | Available | - | - | Available | Available | N/A | - | - | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel / Cobalt HSS | Carbide | Carbide | Carbide | - | Carbide | High-speed steel / Cobalt HSS | High-speed steel | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | N/A | N/A | N/A | N/A | N/A | Available | Available | N/A | Available | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | Available | Available | - | - | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | Available | N/A | N/A | Available | Available | Available | Available | Available | Available |
| Coating Type | Non-Coated | - | - | - | Non-Coated | TiN | TiN | Non-Coated | TiAlN | Non-Coated | - | - | TiN | - | - | - | - | Other | Other | - | - | Other | - | Other | Other | Other | TiAlN | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | - | - | TiAlN | TiAlN | TiAlN | TiN | TiN | TiN |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | 10.5 ～ 20.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.17
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 7.92
- 8
- 8.2
- 8.4
- 8.8
- 9.4
- 9.53
- 10
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 15.88
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Brand
-
- MAKOTOLOY (22)
- OSG (16)
- EIKOSHA (6)
- FUKUDA (5)
- OKAZAKI SEIKO (4)
- IWATA TOOL (3)
- KYOWA SEIKO (3)
- SANDVIK (3)
- ASAHI TOOLS (2)
- DAIICHITOOL (2)
- 7 LEADERS (1)
- DIJET (1)
- NOGAJAPAN (1)
- NS TOOL (1)
- NT TOOL (1)
- SPEED TIGER (1)
- SANKO MFG (1)
- THE CUT (1)
- UNION TOOL (1)
- BIG KAISER (0)
- STAR-M (0)
- FUJIGEN (0)
- GUHRING (0)
- TAIYO-TOOL (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfer, V-Grooves
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.