Clamp Units (for Manual Tightening)（Page 4）

212

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less 14 Days or Less

?* Information on days to ship and prices

Toggle Hook Clamp 6847SU

NABEYA

Since it has a structure where it cannot be returned unless the button is pressed, it prevents error operation and malfunction.

Select to compare

Configure now
Starting from^∗ ：	173.24 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6310 Clamps with plastic cap

AMF

Clamps with plastic cap and captive thrust piece.
Tempered steel, burnished. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	117.12 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6312V Crocodile clamp with counterholder, adjustable

AMF

Crocodile clamp with counterholder, adjustable Continuously adjustable, tempered, galvanized, with undetachable compression piece and back support. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	77.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6312V Crocodile clamp with counterholder, adjustable with stud no. 6379I

AMF

Crocodile clamp with counterholder, adjustable Complete with stud no. 6379I, hexagon screwdriver ISO 2936C, washer DIN 6340 and nut DIN 6330B. Continuously adjustable, tempered, galvanised with captive thrust piece and counter bearing. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	103.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6312V Crocodile clamp, complete with DIN 6379

AMF

Crocodile clamp with counterholder, adjustable complete with stud bolt DIN 6379, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	89.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6314AT Clamping unit to clamp outside of the tool table

AMF

Clamping unit to clamp outside of the tool table Tempered steel. Infinitely adjustable. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	283.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6314AV Stepped clamp with adjusting support screw

AMF

Stepped clamp with adjusting support screw Tempering steel, varnished. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	38.19 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6315V Stepped clamp with adjusting support screw

AMF

Stepped clamp with adjusting support screw Tempering steel, varnished. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	45.12 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6316V Cranked clamp with adjusting support screw

AMF

Cranked clamp with adjusting support screw Tempering steel, varnished. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	39.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6321 Stepless height adjustable clamp

AMF

Stepless height adjustable clamp Steel, forged and tempered, zinc-plated. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	60.58 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6493F Stop, fixed

AMF

Stop, fixed the ground, fixed stops are secured by special screws that guarantee high accuracy during installation.
Size 1 - Simple stop
Size 2 - Double stop The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	87.69 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6494 Low height clamping jaws, model Maxi-Bulle

AMF

Low height clamping jaws, model Maxi-Bulle Body: spherical casting. Jaws: tempered and burnished. Packing: 2 units in carton with hexagon key ISO 2936 without screw s or bolts. Available in pairs only! The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	342.69 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6497 Extra strong clamping jaw

AMF

Extra strong clamping jaw High design with exact prismatic guide.
Main body: malleable iron.
Clamping jaws: case-hardening steel, case-hardened. Reversible clamping jaws with smooth side for machined workpieces and serrated side for rough clamping surfaces. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	405.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6497A Stop, fixed

AMF

Stop, fixed High design.
Body: Cast steel.
Clamping jaws: Case-hardening steel, case-hardened. Reversible clamping jaws with smooth side for machined workpieces and serrated side for rough clamping surfaces. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	255.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6497B Clamping jaw

AMF

Clamping jaw Case hardened. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	150.58 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6498 Edge Clamp

AMF

Edge Clamp complete with mounting. Fastened with screws of strength class 10.9. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	386.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6498FR Base plate, round

AMF

Base plate, round complete with fixing screws. Fastened with screws of strength class 10.9. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	144.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6498FT Base plate

AMF

Base plate complete with mounting. Fastened with screws of strength class 10.9. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	202.50 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6810P Modular clamp

AMF

Modular clamp with vertical foot, welding version.
Reamed and case-hardened bearing bushes.
Hardened, ground and permanently-lubricated pins. Clamp nuts on lever arm to vary friction in movement.
Materials: steel, blued. Lever arm made of cast steel, blued. The product is available per 1 peace.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	122.70 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Base plate connector clamps, Aluminium

GANTER

The clamping bores of GN 162 base plate clamps are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Base plate connector clamps / Aluminum / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912

GANTER

The clamping bore of GN 162.3 base plate connector clamps is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.10 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Base plate connector clamps / Aluminum / GN 165 / 2-with 2 Stainless Steel-clamping screws DIN 912

GANTER

The clamping bores of GN 165 base plate connector clamps are not machined and specially designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square versions are also suitable for profile systems.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Base plate linear actuator connectors, Aluminium

GANTER

GN 162.1 base plate linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Clamping plates for position indicators / GN 954.6 / B8, B10, B12, B14

GANTER

Clamping plates GN 954.6 are used in connection with position indicators GN 954 / GN 9054.
In a simpler way and without large construction and installation effort these spindles can, after adjustment, be clamped and locked.
At the same time these plates are fitted with the bore Ø 6,1 to accept the torque limiter for the position indicator.
The spacer can be installed so that it lies as required either to the right or the left.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.12 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flanged base plate connector clamps, Aluminium

GANTER

The clamping bores of GN 171 flanged base plate connector clamps are not machined and specially designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square versions are also suitable for profile systems.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.30 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Flanged connector clamps / Aluminium / GN 146.3 / 2-with Stainless Steel-clamping screw DIN 912

GANTER

The clamping bores of GN 146.3 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
GN 146.3 flanged connector clamps are also suitable for mounting on profile systems.
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.26 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Flanged linear actuator connectors, Aluminium

GANTER

GN 145.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.26 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Hook type toggle clamps for pulling action

GANTER

The draw hook of the GN 850 hook type toggle clamps can be adjusted within the stroke.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Linear actuator connectors / Aluminium / GN 147.1 / 2-with 2 Stainless Steel-clamping screws DIN 912

GANTER

Linear actuator connectors GN 147.1 are normally supplied mounted only in connection with a square linear actuator and for function control.
The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.
This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	72.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Linear actuator connectors / Aluminium / GN 165.1 / 2-with 2 Stainless Steel-clamping screws DIN 912

GANTER

GN 165.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.
This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	69.50 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Off-set base plate connector clamps, Aluminium

GANTER

The clamping bores of GN 166 off-set base plate connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square versions are also suitable for profile systems.

The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.08 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Split hubs, Sintered Steel

GANTER

Split hubs GN 150 are distinguished by the method of simple clamping to any shaft.
This can be achieved without prior machining of the shaft, eliminating clamping parts and assembly work.
A further advantage is the positioning of the lever arm to any required position.
The shaft tolerance should be within h11; to transmit higher torques the hub can be supplied with a keyway.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.60 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Base plate connector clamps / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912

GANTER

The clamping bore of GN 162.3 Stainless Steel-Base plate connector clamps is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911.3 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Base plate linear actuator connectors

GANTER

GN 162.1 Stainless Steel-Base plate linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911.3 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	134.78 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Flanged connector clamps

GANTER

The clamping bores of GN 145 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively
GN 145 flanged connector clamps are also suitable for mounting on profile systems.

The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	45.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Wide base plate connector clamps, Aluminium

GANTER

The clamping bores of GN 167 wide base plate connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square versions are also suitable for profile systems.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	44.84 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Flanged connector clamps, Aluminum (GN 147.3)

GANTER

The clamping bores of the flanged connector clamps GN 147.3 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square versions are also suitable for the attachment and/or use with profile systems.The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.72 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Euro-Gripper-Tooling - Clamping Jaw with 02006-308x040 Pendulum support

Euro-Gripper-Tooling - Clamping Jaw with 02006-308x040 Pendulum support【2 Pieces Per Package】

TUENKERS

Clamping Jaw with 02006-308x040 Pendulum support

New Product

Select to compare

Configure now
Starting from^∗ ：	215.09 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Euro-Gripper-Tooling - Clamping Jaw with M8x50 Ball clamping screw

Euro-Gripper-Tooling - Clamping Jaw with M8x50 Ball clamping screw【2 Pieces Per Package】

TUENKERS

Clamping Jaw with M8x50 Ball clamping screw

New Product

Select to compare

Configure now
Starting from^∗ ：	132.51 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Clamping Module with Detent Function, Mechanical, Screw-In Version, 6214RM-251

AMF

Clamping module with detent function, mechanical, screw-in version
Mechanical opening.
Housing and piston hardened.
Repetition accuracy < 0.1 mm.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	194.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cover Caps for Clamping Module, 6206ZS

AMF

Cover caps for clamping module
Material: Polyethylene

Select to compare

Configure now
Starting from^∗ ：	13.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Installation Clamping Module, Screw-In Version, with Hydraulic Opening, 6370EARHX5

AMF

Installation clamping module, screw-in version
Hydraulic opening.
Opening operating pressure: min. 50 bar - max. 60 bar.
Cover and piston hardened.
Repeatability < 0.005 mm.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	867.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Thrust Piece Set, 7640D

AMF

Thrust piece set
Top parts with magnetic insert.
Design: fluted, crosswise prism, lengthwise prism and plastic.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	43.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Attachment with Thread, 6440G

AMF

Spherical attachment with thread
Tempered steel, burnished quenched.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	26.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Pressure Pad, 7600DR

AMF

Pressure pad
Complete with dowel pin.
Stainless steel.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	8.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NABEYA	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	TUENKERS	TUENKERS	AMF	AMF	AMF	AMF	AMF	AMF
Product Series	Toggle Hook Clamp 6847SU	6310 Clamps with plastic cap	6312V Crocodile clamp with counterholder, adjustable	6312V Crocodile clamp with counterholder, adjustable with stud no. 6379I	6312V Crocodile clamp, complete with DIN 6379	6314AT Clamping unit to clamp outside of the tool table	6314AV Stepped clamp with adjusting support screw	6315V Stepped clamp with adjusting support screw	6316V Cranked clamp with adjusting support screw	6321 Stepless height adjustable clamp	6493F Stop, fixed	6494 Low height clamping jaws, model Maxi-Bulle	6497 Extra strong clamping jaw	6497A Stop, fixed	6497B Clamping jaw	6498 Edge Clamp	6498FR Base plate, round	6498FT Base plate	6810P Modular clamp	Base plate connector clamps, Aluminium	Base plate connector clamps / Aluminum / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912	Base plate connector clamps / Aluminum / GN 165 / 2-with 2 Stainless Steel-clamping screws DIN 912	Base plate linear actuator connectors, Aluminium	Clamping plates for position indicators / GN 954.6 / B8, B10, B12, B14	Flanged base plate connector clamps, Aluminium	Flanged connector clamps / Aluminium / GN 146.3 / 2-with Stainless Steel-clamping screw DIN 912	Flanged linear actuator connectors, Aluminium	Hook type toggle clamps for pulling action	Linear actuator connectors / Aluminium / GN 147.1 / 2-with 2 Stainless Steel-clamping screws DIN 912	Linear actuator connectors / Aluminium / GN 165.1 / 2-with 2 Stainless Steel-clamping screws DIN 912	Off-set base plate connector clamps, Aluminium	Split hubs, Sintered Steel	Stainless Steel-Base plate connector clamps / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912	Stainless Steel-Base plate linear actuator connectors	Stainless Steel-Flanged connector clamps	Wide base plate connector clamps, Aluminium	Flanged connector clamps, Aluminum (GN 147.3)	Euro-Gripper-Tooling - Clamping Jaw with 02006-308x040 Pendulum support【2 Pieces Per Package】	Euro-Gripper-Tooling - Clamping Jaw with M8x50 Ball clamping screw【2 Pieces Per Package】	Clamping Module with Detent Function, Mechanical, Screw-In Version, 6214RM-251	Cover Caps for Clamping Module, 6206ZS	Installation Clamping Module, Screw-In Version, with Hydraulic Opening, 6370EARHX5	Thrust Piece Set, 7640D	Spherical Attachment with Thread, 6440G	Pressure Pad, 7600DR
CAD		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D				2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	173.24 € *Unit price with basic configuration	117.12 € *Unit price with basic configuration	77.88 € *Unit price with basic configuration	103.85 € *Unit price with basic configuration	89.42 € *Unit price with basic configuration	283.85 € *Unit price with basic configuration	38.19 € *Unit price with basic configuration	45.12 € *Unit price with basic configuration	39.46 € *Unit price with basic configuration	60.58 € *Unit price with basic configuration	87.69 € *Unit price with basic configuration	342.69 € *Unit price with basic configuration	405.00 € *Unit price with basic configuration	255.00 € *Unit price with basic configuration	150.58 € *Unit price with basic configuration	386.54 € *Unit price with basic configuration	144.81 € *Unit price with basic configuration	202.50 € *Unit price with basic configuration	122.70 € *Unit price with basic configuration Volume Discount	18.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.10 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	34.20 € *Unit price with basic configuration Volume Discount	40.66 € *Unit price with basic configuration Volume Discount	18.12 € *Unit price with basic configuration Volume Discount	46.30 € *Unit price with basic configuration Volume Discount	23.26 € *Unit price with basic configuration Volume Discount	40.26 € *Unit price with basic configuration Volume Discount	28.70 € *Unit price with basic configuration Volume Discount	72.64 € *Unit price with basic configuration Volume Discount	69.50 € *Unit price with basic configuration Volume Discount	34.08 € *Unit price with basic configuration Volume Discount	15.60 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	46.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	134.78 € *Unit price with basic configuration Volume Discount	45.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	44.84 € *Unit price with basic configuration Volume Discount	35.72 € *Unit price with basic configuration Volume Discount	215.09 € *Unit price with basic configuration	132.51 € *Unit price with basic configuration	194.58 € *Unit price with basic configuration	13.79 € *Unit price with basic configuration	867.79 € *Unit price with basic configuration	43.50 € *Unit price with basic configuration	26.42 € *Unit price with basic configuration	8.07 € *Unit price with basic configuration
Min. Shipping Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	Same day	Same day	7 Days	7 Days	4 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	Same day	Same day	7 Days	Same day	7 Days	7 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications																																						New Product	New Product