Screws and Accessories（Page 8）

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• 

  Double Screw

  NABEYA

  Includes a nylon lock to prevent looseness. The existing tap hole diameter can be easily changed. It can also be used for correcting defects in tapped holes.

  Select to compare

  Configure now
  Starting from∗ ：	44.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Screw with Pad Type A

  NABEYA

  A clamp unit with a pad that allows for a wide installation area. Angles up to 10 degrees are possible.

  Select to compare

  Configure now
  Starting from∗ ：	222.53 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Black Oxide Flange Nut (S45C)

  NABEYA

  Flanged nut.
  [Features]
  · HRC30±5 quenching provides a long service life.
  [Application]
  · Optimal for tightening clamps.

  Select to compare

  Configure now
  Starting from∗ ：	6.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flange Nut (SUS)

  NABEYA

  Flange nut (SUS) made of SUS316.

  Select to compare

  Configure now
  Starting from∗ ：	59.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Parallel Screw Plug

  NABEYA

  For holding down compression springs or as an oil inlet cap, etc.

  Select to compare

  Configure now
  Starting from∗ ：	2.37 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  B-Type V Block【2 Pieces Per Package】

  NABEYA

  The pair difference of the V groove with respect to the two reference planes a is MC0.05 and GS/FS0.03.

  Select to compare

  Configure now
  Starting from∗ ：	78.40 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cam Clamp Lever

  NABEYA

  A cam-shaped clamp lever for cam clamp set.

  Select to compare

  Configure now
  Starting from∗ ：	101.07 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Cam Clamp Lever A Type

  NABEYA

  A cam-shaped clamp lever for cam center clamp set.

  Select to compare

  Configure now
  Starting from∗ ：	123.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Cam Center Clamp Bolt

  NABEYA

  A clamp bolt for cam center clamp set.

  Select to compare

  Configure now
  Starting from∗ ：	32.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Slot Nut (Through Hole Type)

  NABEYA

  The screw holes go through.

  Select to compare

  Configure now
  Starting from∗ ：	6.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Slot Long Nut

  NABEYA

  A T-slot nut with 3 tapped holes. It leads to a reduction in the number of parts by integrating

  Select to compare

  Configure now
  Starting from∗ ：	29.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamp Bar Type B

  NABEYA

  A clamp bar with a slotted hole shape. The slotted hole shape widens the clamping width.

  Select to compare

  Configure now
  Starting from∗ ：	18.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Jig Support Jack

  NABEYA

  Can be used by fixing to the base with screws. Can be fixed on vertical surfaces (angled blades, etc.). When height is insufficient, the swing clamp joint S type can be used as well. Can be used together with attachment for clamp support jack.

  Select to compare

  Configure now
  Starting from∗ ：	99.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Jack Attachment

  NABEYA

  Use the holes on the top surface of the applicable jack. JAT6440 is a spherical support type. JAT6441 is a V-groove support type.

  Select to compare

  Configure now
  Starting from∗ ：	53.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thrust Bolt 7110DM

  NABEYA

  Brass type clamp attachment. This makes it difficult for the workpiece to be damaged.

  Select to compare

  Configure now
  Starting from∗ ：	114.33 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Thrust Bolt 7110DS

  NABEYA

  S45C/quenched HRC30±5 thrust bolt 7110DS.

  Select to compare

  Configure now
  Starting from∗ ：	41.24 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Pin End U Shape Clamp

  NABEYA

  Since the tip shape is thin, it is ideal for clamping the upper surface of a narrow space. A wide range of clamping positions can be accommodated due to the slotted hole

  Select to compare

  Configure now
  Starting from∗ ：	123.79 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Fork Clamp

  NABEYA

  Since the tip shape is thin, it is ideal for clamping the upper surface of a narrow space. A wide range of clamping positions can be accommodated due to the slotted hole

  Select to compare

  Configure now
  Starting from∗ ：	112.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ballpoint Hexagonal Bar Wrench

  NABEYA

  The ball point allows it to be manipulated while tilted up to 30°. A long type which can also be used for work in narrow spaces.

  Select to compare

  Configure now
  Starting from∗ ：	11.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Leg Clamp

  NABEYA

  LC12/14/16/20: FCD450/LC14A/LCMC: S45C leg clamp.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Diamond T Nut

  NABEYA

  Since it is possible to insert from the top of the T-groove, it is convenient for use on a horizontally long table. Tightening is easy as the adhesion area in the T-groove is small.

  Select to compare

  Configure now
  Starting from∗ ：	26.41 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T Slot Nut (S45C) Groove Damage Protection Specification

  NABEYA

  Features a specification where the bolts do not run through to avoid damage to T-grooves caused by bolts protruding.
  [Application] Fixing bolts to the T-grooves of surface plates
  [Material] S45C
  [Heat Treatment] Quenched
  [Hardness] HRC30 ±5
  [Surface Processing] Black oxide finish

  Select to compare

  Configure now
  Starting from∗ ：	5.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamp Support Spring

  NABEYA

  When the clamp is loosened, the spring automatically pushes up the clamp, enabling easy replacement of the workpiece.

  Select to compare

  Configure now
  Starting from∗ ：	113.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gooseneck Clamp

  NABEYA

  EN 1.1191 Equiv. / hardening HRC 30±5 gooseneck clamp. Surface treatment: Chemical conversion treatment

  Select to compare

  Configure now
  Starting from∗ ：	37.91 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Jig-Catch

  NABEYA

  S45C/quenched jig catch (inclined part).

  Select to compare

  Configure now
  Starting from∗ ：	47.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Split Washer for Jig

  NABEYA

  S45C/quenched HRC30±5 jig split washer.

  Select to compare

  Configure now
  Starting from∗ ：	12.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Center Clamp

  NABEYA

  EN 1.1191 Equiv. / Hardening HRC 30±5 Center Clamp, Surface Treatment: black oxide coating

  Select to compare

  Configure now
  Starting from∗ ：	29.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rest Nut (S Type)

  NABEYA

  SCM420/quenched HRC56±3 rest nut (S type).

  Select to compare

  Configure now
  Starting from∗ ：	93.85 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Rest Bolt

  NABEYA

  Used as a backing plate for fitting material for positioning bolts, etc.

  Select to compare

  Configure now
  Starting from∗ ：	19.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spherical Washer (SUS304), Concave

  NABEYA

  SW-SSM/SSF: Spherical washer made of SUS304.

  Select to compare

  Configure now
  Starting from∗ ：	7.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FG Clamping Screw

  NABEYA

  S45C support screw for FG-clamp.

  Select to compare

  Configure now
  Starting from∗ ：	15.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FG Plain Clamp

  NABEYA

  Forged EN 1.1191 Equiv. FG-plain clamp. Surface treatment: Phosphate treatment

  Select to compare

  Configure now
  Starting from∗ ：	34.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  T-Slot Cover

  NABEYA

  Prevents the entry of cutting chips, etc., into the T-grooves of machine tables. Cut it according to the T-groove length, workpiece and jig. Made of aluminum and easy to cut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	62.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T Slot Bolt

  NABEYA

  S45C/quenched HRC30±5 T-slot bolt.

  Select to compare

  Configure now
  Starting from∗ ：	16.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Nut Material

  NABEYA

  Not hardened, so tap holes can be drilled easily to suit the application.

  Select to compare

  Configure now
  Starting from∗ ：	3.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Alignment Bolt 7110DI

  NABEYA

  The tip is flat and cut. The ball rotates flexibly up to 9° and clamps securely even on inclined surfaces.

  Select to compare

  Configure now
  Starting from∗ ：	142.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swan Neck Clamp

  NABEYA

  EN 1.1191 Equiv. / hardening HRC 30±5 clamp duck type. Surface treatment: Black oxide coating

  Select to compare

  Configure now
  Starting from∗ ：	126.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Jig Key Washer

  NABEYA

  SS400/quenched HRC30±5 key washer.

  Select to compare

  Configure now
  Starting from∗ ：	47.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thrust Bolt 7110D

  NABEYA

  EN 1.1191 Equiv. / hardening HRC 30±5, thrust bolt 7110D.

  Select to compare

  Configure now
  Starting from∗ ：	75.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Double Gooseneck Clamp

  NABEYA

  EN 1.1191 Equiv. double gooseneck clamp. Surface treatment: baked coating

  Select to compare

  Configure now
  Starting from∗ ：	196.91 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Double End Clamp

  NABEYA

  EN 1.1191 Equiv. / hardening HRC 30±5 double end clamp. Surface treatment: Black oxide coating

  Select to compare

  Configure now
  Starting from∗ ：	26.14 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heel Screw (SUS)

  NABEYA

  Heel screw (SUS) made of SUS316.

  Select to compare

  Configure now
  Starting from∗ ：	44.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heel Bolt

  NABEYA

  Automatenstahl 22 / hardening HRC 40 to 45 heel bolt. Surface treatment: Black oxide coating

  Select to compare

  Configure now
  Starting from∗ ：	9.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Press Clamp Nut

  NABEYA

  S45C/quenched HRC30±5 press clamp nut.

  Select to compare

  Configure now
  Starting from∗ ：	18.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locating Screw

  NABEYA

  SUM22/quenched HRC50-60 locating screw.

  Select to compare

  Configure now
  Starting from∗ ：	32.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...