Lathe Jigs（Tip Carbide Insert (Y/N)：N/A）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Live Center A Type
TAKURA KOGU
[Features]
· Fully quenched and polished, HRC 60-63.
· The head drive mechanism, created from many years of experience, prevents the ingress of fine cutting powder and cutting fluid (bearing has long service life).
· The rotation speed is up to 3,000 min-1 for MT-2, MT-3, and MT-4, 2,000 min-1 for MT-5, and 1,000 min-1 for MT-6.Configure nowStarting from∗ ： 242.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Standard Type LS
SANYOSEISAKUSYO
Secures high rigidity and durability while maintaining slim shape.
[Features]
· By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
· General purpose waterproofing is realized during rotation because there is no opening in the forward direction.
· Optimal for threading of thin objects, etc.- Volume Discount
Configure nowStarting from∗ ： 236.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rolling Center RST
FUTAMURA MACHINES & TOOLS
[Features]
· Inside this product, there are two ball bearings on M.T No. 1 and No. 2, and 1 thrust bearing. 3 types of each of taper roller bearing, thrust bearing and ball bearing are used for M.T No. 3 to No. 7.Configure nowStarting from∗ ： 597.91 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rotating Center
NSK
[Features]
Since the run-out of center spindle tapered part is less than 5 µm, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
[Use]
For support and runout prevention of work pieces.- Volume Discount
Configure nowStarting from∗ ： 351.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Load Type M
SANYOSEISAKUSYO
Supports MT6 or later large machinery.
[Features]
· Uses 2 large angular bearings to maintain high accuracy.
· Metric 80 (1/20 taper) standard lineup also.Configure nowStarting from∗ ： 5,546.78 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Lathe Center
TRUSCO NAKAYAMA
[Features]
- All steel is pure.
[Use]
For runout prevention of work pieces.Configure nowStarting from∗ ： 44.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rolling Center NCF
FUTAMURA MACHINES & TOOLS
[Features]
· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Configure nowStarting from∗ ： 757.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Umbrella-Shaped Rotation Center
TAKURA KOGU
[Features]
· The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstockConfigure nowStarting from∗ ： 165.63 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Umbrella-shaped Rotation Center
TRUSCO NAKAYAMA
[Features]
- A bearing entry.
[Applications]
- As the center tool of the tube center hole.Configure nowStarting from∗ ： 236.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NAKANE Rotating Center, High-Speed Waterproof Type LF SP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation. Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
[Features]
· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.- Volume Discount
Configure nowStarting from∗ ： 297.14 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, High-Speed Waterproof Type LF TP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.Configure nowStarting from∗ ： 346.52 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]
· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.Configure nowStarting from∗ ： 340.73 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]
· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.Configure nowStarting from∗ ： 388.65 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Light Torque, Waterproof Type FP SP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type).
· Rotation follows quick-starting machines.
· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.- Volume Discount
Configure nowStarting from∗ ： 314.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Light Torque, Waterproof Type FP TP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type).
· Rotation follows quick-starting machines.
· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.Configure nowStarting from∗ ： 368.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut
SANYOSEISAKUSYO
Easy to detach and attach in front with the forcing nut.
[Features]
· The nut fits into the same size LF type and FP type.Configure nowStarting from∗ ： 352.32 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut
SANYOSEISAKUSYO
Easy to detach and attach in front with the forcing nut.
[Features]
· The nut fits into the same size LF type and FP type.Configure nowStarting from∗ ： 410.38 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Standard Type, Includes Oil Sheet LSP
SANYOSEISAKUSYO
Equipped with both high rigidity and waterproofing
[Features]
· By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
· Highly waterproof and dustproof in low to medium speed regions.
· Also ideal for grinding and hobbing machines.- Volume Discount
Configure nowStarting from∗ ： 288.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Strong Type XP
SANYOSEISAKUSYO
This model supports a load resistance improved from the standard type.
[Features]
· Has the structure of the standard type but with an improved load resistance.
· 1.2 to 1.5 times the load capacity of LS/LSP.
· Highly waterproof and dustproof in low to medium speed regions.Configure nowStarting from∗ ： 509.65 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Slide Back Type H
SANYOSEISAKUSYO
Can handle changes caused by heat swelling in machining of items such as long objects.
[Features]
· Slide-back structure using a dish spring.
· Prevents distortion due to thermal expansion of workpieces and wear of the center hole.
· The shape of the tip does not interfere with tool progress.Configure nowStarting from∗ ： 471.68 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NAKANE Rotating Center, Bevel Type BS
SANYOSEISAKUSYO
For large diameter workpieces such as pipes.
[Features]
· Thickened shaft core and rigidity against load weight are optimal for high-precision heavy cutting.
· Supports pipes and large I.D. workpieces. Lineup of MT2 to 4, 60° tip products.
· Oil seal and O-ring prevent permeation of cutting fluid and cutting dust.- Volume Discount
Configure nowStarting from∗ ： 316.28 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kabuto Seal Center KS-A
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 732.95 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kabuto Seal Center KS-S KS-P
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 591.70 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kabuto Seal Center With Cold Punched Nut KSN
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 1,020.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kabuto Seal Center With Cold Punched Nut KSN-A
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 863.33 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Kabuto Seal Center With Cold Punched Nut KSN-B
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 867.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Kabuto Center KC
KABUTO MFG
[Features]
· Regular model for general lathes.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 350.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Kabuto Center KC-6
KABUTO MFG
[Features]
· Regular model for general lathes.
· Exchangeable tip provides reductions in cost.Configure nowStarting from∗ ： 2,427.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Kabuto Finelive Center KFL-A
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an air film resulting from rotation.
· Light rotational torque ideal for fine machining or light metal working.
· Replacement type head provides reductions in cost.Configure nowStarting from∗ ： 917.65 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKURA KOGU | SANYOSEISAKUSYO | FUTAMURA MACHINES & TOOLS | NSK | SANYOSEISAKUSYO | TRUSCO NAKAYAMA | FUTAMURA MACHINES & TOOLS | TAKURA KOGU | TRUSCO NAKAYAMA | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG |
| Product Series | NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut | NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut | NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut | NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut | NAKANE Rotating Center, Standard Type, Includes Oil Sheet LSP | ||||||||||||||||||||||||
| Starting from∗ | 242.44 € *Unit price with basic configuration | 236.29 € *Unit price with basic configuration Volume Discount | 597.91 € *Unit price with basic configuration | 351.82 € *Unit price with basic configuration Volume Discount | 5,546.78 € *Unit price with basic configuration | 44.74 € *Unit price with basic configuration | 757.24 € *Unit price with basic configuration | 165.63 € *Unit price with basic configuration | 236.94 € *Unit price with basic configuration | 297.14 € *Unit price with basic configuration Volume Discount | 346.52 € *Unit price with basic configuration | 340.73 € *Unit price with basic configuration | 388.65 € *Unit price with basic configuration | 314.51 € *Unit price with basic configuration Volume Discount | 368.24 € *Unit price with basic configuration | 352.32 € *Unit price with basic configuration | 410.38 € *Unit price with basic configuration | 288.44 € *Unit price with basic configuration Volume Discount | 509.65 € *Unit price with basic configuration | 471.68 € *Unit price with basic configuration | 316.28 € *Unit price with basic configuration Volume Discount | 732.95 € *Unit price with basic configuration | 591.70 € *Unit price with basic configuration | 1,020.86 € *Unit price with basic configuration | 863.33 € *Unit price with basic configuration | 867.68 € *Unit price with basic configuration | 350.06 € *Unit price with basic configuration | 2,427.84 € *Unit price with basic configuration | 917.65 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 5 Days | 8 Days | 6 Days | 8 Days | 6 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 8 Days | 8 Days | 5 Days | 8 Days | 8 Days |
| Type | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center |
| Mounting type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Chuck Nominal Size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Jaw Height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Manufacturer | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Outer Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of Jaws | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank MT No | MT4 | MT1 ～ MT5 | MT4 | MT3 ～ MT5 | Metric80 | MT1 ～ MT6 | MT3 ～ MT5 | MT2 ～ MT6 | MT2 ～ MT5 | MT1 ～ MT5 | MT1 ～ MT5 | MT2 ～ MT5 | MT2 ～ MT5 | MT1 ～ MT5 | MT1 ～ MT5 | MT2 ～ MT5 | MT2 ～ MT5 | MT1 ～ MT6 | MT3 ～ MT4 | MT3 ～ MT4 | MT2 ～ MT6 | MT3 ～ MT5 | MT2 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT2 ～ MT5 | MT6 | MT3 ～ MT5 |
| Tip Carbide Insert (Y/N) | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
- Serrated Type
- Upper and Lower Divided Jaw Type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 110
- 130
- 140
- 160
- 165
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 250
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
- Kitagawa
- Howa
- Nikko
- Matsumoto
- Hitachi
- Victor
- Other
-
Chuck Outer Diameter(mm)
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Brand
-
- MISUMI (0)
- SANYOSEISAKUSYO (14)
- KABUTO MFG (8)
- FUTAMURA MACHINES & TOOLS (2)
- TRUSCO NAKAYAMA (2)
- TAKURA KOGU (2)
- NSK (1)
- TEIKOKU_CHUCK (0)
- ARM SANGYO (0)
- KITAGAWA IRON WORKS (0)
- KAWASHIMO (0)
- OKUKAWATEKOUSYO (0)
- KOBAYASHI IRON WORKS (0)
- NORELEM (0)
- THE CUT (0)
- GIGA SELECTION (0)
CAD data type
-
- 2D
- 3D
Categories related to Lathe Jigs
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.