Wheels with Shafts（Application：Polishing）

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Mounted Type New Soft Lap【14 Pieces Per Package】

  UHT

  An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Moreover, it is recommended for polishing workpieces without damaging them, such as in paint peeling and rust removal.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Felt Bob

  NAKANISHI

  [Features]
  · High quality felt bob that works well with abrasives.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.86 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Felt Bob

  NAKANISHI

  [Features]
  · Made from compressed, high-quality wool and for use in carefully finishing outer diameters during lathe turning.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	40.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Flap Wheels with Shaft

  YANASE

  High-quality standard products that come in a vast variety of sizes and grain sizes.
  
  [Features]
  · A wide range of sizes and particle sizes with high quality.
  · Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
  · It is elastic, so that it fits nicely onto the workpiece for close polishing.
  · It is not exothermic and does not alter the polished material.
  · Fits well to workpiece.
  · Boasts significant autogenous action.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spin Threaded Flap Wheel (Replaceable Shaft) Spin Shaft (Hex Shaft)

  TRUSCO NAKAYAMA

  Screw type shaft, with a single touch attaching and detaching. Enables replacing of the polishing units, while shaft is attached to the chuck of the power section. Shaft for spin screw flap wheel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Super Diamond Flap

  ICHIGUCHI

  Sharp cutting edge and diamond sheet abrasive with superb hardness are machined into a tip tool. Characteristics include strong grinding ability, excellent durability and a gentle touch. Allows for work as intended without chipping hard and brittle workpieces. Both a disc type and a flap type with shaft are available. Both wet and dry types can be used for the Super Diamond series.
  
  [Features]
  · Diamond product that can be used dry.
  · Product commercialized by replacing polishing cloth with diamond sheet.
  · Features excellent sharpness and a beautiful finish.
  · Super Diamond (all-diamond): Boasts sharp grinding power and high durability

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	35.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pointed Pad (Shaft Diameter 6 mm), Pointed Cap, Cap L Type

  OFFICE MINE

  [Features]
  · The cap (abrasive) can be changed with a single action.
  [Applications]
  · For grinding internal rounded sections of molded products such as aluminum wheels.
  · For deburring metal parts, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	80.45 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Irregular-Shaped Felting Buff With Shaft F73○○【5 Pieces Per Package】

  NIHON SEIMITSU KIKAI KOSAKU

  [Features]
  · Carefully-selected, high-quality wool densely compressed. Select the hardness according to the work.
  · We stock various shapes of buff. Select the shape that corresponds to the shape of the workpiece.
  · Using an abrasive is recommended for polishing and adding luster.
  [Applications]
  · Ideal for polishing and adding luster to molds, metals and precious metals, etc. when using abrasive, and for removing scratches from metals and non-metals, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.83 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Polishing Tool: Micro Flap

  MISUMI

  Closely fits the shape of the work material.
  Self-regenerating property means polishing with new abrasive surface at all times.
  Low thermal transfer prevents distortion and chipping of the workpiece due to heat.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	33.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spin Threaded Stem Flap Wheel (Replaceable Shaft), SF-30/40/50/60【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  - Allows one touch attachment / detachment with screw shaft.
  - Can be replaced with the shaft still attached to the chuck.
  - Optional spin shaft, can replace the shaft of the standard length (40 mm) and shaft for deep holes (100 mm) can be replaced.
  [Applications]
  - Rust removal, deburring, blazing.
  - Polishing inside cylinders, around corners, etc.
  - Tools can be used with: straight grinder (air / electric), electric drilling machines.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Nylon Mini Wheel (Soft Type / Shaft Diameter: 3 mm, with 1 Arbor)【25 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  - A soft type with bonded nylon fiber as the base that fits softly and well to the shape of the machining object.
  [Applications]
  - Suitable for grinding narrow grooves.
  - Brushing work with small objects, stainless steel, aluminum, etc.
  - Mirror preprocessing for satin finishes.
  Tools used: micro grinders and electric drills.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Felt Buff Shaft Diameter 3.0 mm

  MINITOR

  [Features]
  · A high-quality, smooth buff made of wool compressed to high density.
  · Excellent abrasive retention force enables effective polishing.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Polishing Sander

  NAKANISHI

  [Features]
  · Sander for finishing made by impregnating nylon non-woven fabric with abrasive grains.
  · Highly-elastic and enables smooth, uniform polishing without creating secondary burrs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	54.61 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Polishing Tool: Flap with One-touch Screw-on Shaft for Polishing Irregular Surfaces【10 Pieces Per Package】

  MISUMI

  The abrasive paper on the flap expands due to centrifugal force when rotated, so it conforms to the shape of the workpiece and can also be used to polish the inside surface of the hole, and the flap and versatile rail are easily interchangeable.

  Select to compare

  Configure now
  Min. Shipping Days ：	8 Days

• 

  Wheel Set with Felt Shaft, Shaft Diameter: 3 mm【12 Pieces Per Package】

  MISUMI

  [Features]
  ·A set of popular shapes and sizes of soft felt buffs

  Select to compare

  Configure now
  Starting from∗ ：	26.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Nylon Wheel

  MISUMI

  Since unilon fiber is specially coated with abrasive material, the intertwined unilon fiber plays the role of a cushion and prevents excessive shaving. It does not cause clogging and provides a constant finished surface until the end of product life. [C-Value]

  Select to compare

  Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  AC Drum【1-10 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Uses tube-shaped paper with a dedicated rubber holder.
  · Available in abundant sizes, with smooth touch.
  · Because it is made of rubber, there are no concerns about it carving into the workpiece.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Skoo Light Wheel S【5 Pieces Per Package】

  ICHIGUCHI

  Suitable for work on both flat surfaces and irregularly shaped surfaces. S (standard item) uses only non-woven fabric.
  
  [Features]
  · Nonwoven fabric abrasive material has been processed into a wheel shape.
  · Suitable for polishing surfaces, curves and interiors.
  · Made of nonwoven fabric abrasive material only, for a light finish with a soft touch.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	51.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flap Wheel【5 Pieces Per Package】

  ICHIGUCHI

  Uses a polishing cloth with alumina abrasive. Worn abrasive material is promptly ejected, enabling an even finish every time. As it has high adaptability to workpieces, it can be used anywhere, even flat, curved and irregular surfaces. Suitable for deburring, removing rust and removing scratches from iron and nonferrous metal as well as for grinding and polishing the inside and openings of pipes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Polyethylene Foil T【10 Pieces Per Package】

  ICHIGUCHI

  The structure is layered to adapt to uneven surfaces. Available from 10 mm in diameter, which is ideal for detailed polishing. One laminated sheet is called 1P.
  
  [Features]
  · Utilizes a special nonwoven fabric abrasive material.
  · It produces glossier finish as compared to the Sco-Light.
  · The structure is layered to adapt to uneven surfaces.
  · Poli Light Wheel T from 10 mm to 30 mm diameters are available, which are ideal for detailed polishing

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	75.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cup Disc

  YANASE

  A product which can polish both bottom and side surfaces at the same time.
  
  [Features]
  · The tip (bottom) can also be used for added convenience.
  · Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
  · Unlikely to clog, allowing a uniform finish to be achieved throughout.
  · It is elastic, easy to fit to the workpiece.
  · Due to heat dissipation, it does not alter the polished material.
  · Excellent autogenous properties.
  · Ideal for polishing flat surfaces, bottom surfaces and corners

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flap With Mugen Shaft

  YANASE

  [Features]
  · Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
  · Tough abrasive cloth is used to achieve both grinding power and durability.
  · The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
  · Deburring of metals and rust-removal.
  · For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
  · Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  AC Band【50 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Uses tube-shaped paper with a dedicated rubber holder.
  · Available in abundant sizes, with smooth touch.
  · Performs the partial repair of molds and grinding/polishing of fine parts accurately without waste.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cup Foil【5 Pieces Per Package】

  ICHIGUCHI

  Makes working with the head surface of flap wheels possible. Grinding and polishing on the bottom of the L-shaped or concave parts, which was difficult with conventional wheels, can be performed efficiently. Uses an alumina abrasive to support all kinds of work.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	61.14 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cone Paper L / Z【50 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · The size is long, so compared to conventional cone paper, the work efficiency has been improved.
  · A soft, dedicated holder that is easy to hold and can be used to perform smooth polishing work.
  · Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal.
  · Extremely convenient when the work environment is not free.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	79.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKO Light Foil M【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material has been processed into a wheel shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. M (mixed item) is a nonwoven fabric abrasive material mixed with polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch. Also, the hairline pattern provided by moving the M type straight in one direction is very popular.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	60.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKO Light Foil T【5-10 Pieces Per Package】

  ICHIGUCHI

  One laminated sheet is called 1P.
  
  [Features]
  · The structure is layered to adapt to uneven surfaces.
  · Available from 10 mm in diameter, which is ideal for detailed polishing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	51.24 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Slit Wheel【5 Pieces Per Package】

  ICHIGUCHI

  The flap wheel vanes are cut to increase the outstanding ability to adapt to workpieces. In areas with overlapping steep curves, thread ridges, and multiple grooves, each and every workpiece is carefully polished. Suitable for grinding irregularly shaped pipes. Uses an alumina abrasive.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	62.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Unilon Wheel with Shaft (Hard)

  YANASE

  Ideal for removal of scratches and rust. Can also be used for hairline finishing.
  
  [Features]
  · Selectable from abundant granularity and sizes.
  · It removes burrs without scraping, with no secondary burrs.
  · As it is soft, elastic and has good adaptability, it prevents fatigue.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cone Paper L/A

  ICHIGUCHI

  Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal. Extremely convenient when the work environment is not free.
  
  [Features]
  · The size is long, so compared to conventional cone paper, the work efficiency has been improved.
  · Soft, dedicated holder that is easy to hold and can be used to perform smooth polishing work

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.38 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Polyethylene Foil【5 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Special non-woven fabric abrasive material reduces deposition on the workpiece.
  · Ideal for removing the nap of wood, scratch blurring on metal curved surfaces and in metal cylinders, glazing and polishing, adjusting the surface roughness before painting or laminating and removing scratches from metal.
  · Poli Light Wheels from 30 mm to 100 mm in diameter are available

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	61.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro Flap【10 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · A standard flexible polishing wheel with shaft (diameter 10 to 25 mm).
  · The small flap wheel has been carefully crafted.
  · No core run-out even under high-speed rotation, for smooth working of fine gaps.
  · It is ideal for work such as detailed modification of machine parts, partial repair of molds, cleaning inner surface of small diameter pipes and deburring grooves.
  · Uses an alumina abrasive.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	65.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Unilon Wheel with Shaft

  YANASE

  Prevents over-scraping, and produces a uniform finished surface with no clogging.
  
  [Features]
  · Unilon's standard product.
  · Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
  · Its autogenous properties prevent clogging.
  · Polishes without scratching.
  · Finishes the surface without scraping the material.
  · Flexible and fits perfectly to the curved surfaces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Super Diamond Band【5 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Diamond product that can be used dry.
  · Product commercialized by replacing polishing cloth with diamond sheet.
  · Features excellent sharpness and a beautiful finish.
  · Super Diamond (all-diamond): Boasts sharp grinding power and high durability

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	94.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Diamond Band【10 Pieces Per Package】

  ICHIGUCHI

  The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. For waste-free polishing of detailed parts of difficult-to-cut materials
  
  [Features]
  · Diamond product that can be used dry.
  · Made of resin bond diamond.
  · Features a smooth touch.
  · Use according to the application

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	46.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Diamond Micro Flap

  ICHIGUCHI

  The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. Suitable for work with materials that are difficult-to-cut or have irregular surfaces.
  
  [Features]
  · Diamond product that can be used dry.
  · Made of resin bond diamond.
  Features a smooth touch.
  · Use according to the application

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cushioning Cone

  YANASE

  Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cushioning Cone Holder

  YANASE

  Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
  
  [Features]
  · Attachment when using a cushioning cone.
  · Superb elasticity with the dedicated sponge.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.29 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Single-Action Top with Shaft

  YANASE

  [Features]
  · This is the product you always wanted.
  · The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
  · Capable of heavy polishing with a soft touch.
  · It is a retractable type, providing a large polishing area and beautiful finished surface.
  · One-touch shaft attachment

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.42 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Mini Flap Wheel

  NEWREGISTON

  Optimal for irregular shape polishing, with polishing of the front surfaces only without scraping the foundations.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.36 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  "Flaps with Shaft" (No Metal Fittings, Shaft Diameter 3 mm)

  MURAKO

  [Features]
  · The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
  · Can be used for any type of polishing, including inner, curved and flat surfaces.
  · Strong thermal dissipation effect ensuring minimal burning of workpieces.
  · Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
  · Fits the shape of the workpiece well.
  [Applications]
  · Grinding and polishing of iron and stainless steel.
  · Pre-painting polishing.
  · Scratch removal.
  · Polishes the inside of pipes.
  · For rust removal.
  · Deburring.
  · Surface polishing.
  · Scorch removal after welding.
  · Electric grinder, electric drill, drilling machine, etc.
  · Tool used: straight grinder. (Air/Electric)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flap With Shaft (Without Bracket, Shaft, Diameter 6 mm): Polishing

  MURAKO

  [Features]
  · The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
  · Can be used for any type of polishing, including inner, curved and flat surfaces.
  · Strong thermal dissipation effect ensuring minimal burning of workpieces.
  · Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
  · Fits the shape of the workpiece well.
  [Applications]
  · Grinding and polishing of iron and stainless steel.
  · Pre-painting polishing.
  · Scratch removal.
  · Polishes the inside of pipes.
  · For rust removal.
  · Deburring.
  · Surface polishing.
  · Scorch removal after welding.
  · Tool used: straight grinder. (Air/Electric)
  · Electric grinder, electric drill, drilling machine, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flap With Shaft (Without Metal Fittings, Shaft Diameter 6 mm) Used for Polishing Inner Surfaces, Curved Surfaces, Flat Surfaces, Etc.

  MURAKO

  [Features]
  · The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
  · Can be used for any type of polishing, including inner, curved and flat surfaces.
  · Strong thermal dissipation effect ensuring minimal burning of workpieces.
  · Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
  · Fits the shape of the workpiece well.
  [Applications]
  · Grinding and polishing of iron and stainless steel.
  · Pre-painting polishing.
  · Scratch removal.
  · Polishes the inside of pipes.
  · For rust removal.
  · Deburring.
  · Surface polishing.
  · Scorch removal after welding.
  · Electric grinder, electric drill, drilling machine, etc.
  · Tool used: straight grinder. (Air/Electric)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  "Slitted Felt Wheel with Shaft" (Shaft Diameter: 6 mm)

  MURAKO

  [Features]
  · A felt flap type that greatly increases the efficiency of using grease abrasives (green rouge, etc.).
  · It has excellent flexibility and can fit to the shape of the workpiece, realizing even polish and beautiful shine.
  · Can be used for any type of finish polishing, including inner, curved and flat surfaces.
  [Applications]
  · For finishing and wiping.
  · Add abrasive for mirror metal finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  "Sponge Sander" (Shaft Diameter: 3 mm)【3 Pieces Per Package】

  NAKANISHI

  [Features]
  · A sander that uses heavy duty polyester fibers.
  · Having outstanding flexibility, it softly polishes flat and curved surfaces alone without scratching.
  · Multiporous with almost no clogging. Reduces heat generation on surfaces being treated.
  · Heavy duty fibers retain abrasive particles for excellent durability.
  [Applications]
  · For micro deburring of metal products.
  · For repairing rust and scratches as well as light polishing.
  · Polishing of stainless steel, copper, brass, aluminum, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	49.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...