Tools Used at Electric Facilities（Page 5）

?* Information on days to ship and prices

• 

  Inter middle Cable Grip EA626GC-19

  ESCO

  【Product Specifications】
  ・Pull a cable halfway by attaching to the middle of cable.
  ・Working tensile strength…1.6kN
  ・Cable dim.…Dia. 16 to 19mm

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	185.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hand Nibbler EA627

  ESCO

  【Product Specifications】
  ・Cutting Capacity …Aluminum, Cupper ：1.2mm, Plastic ：2.0mm
  ・Cutting width …2.7mm
  ・Body Material …Special Tool Steel, etc.
  ・Finish …Nickel Plating
  ・Material Of Blade …Special Tool Steel , hardening steel
  ・Handle …Plastic Sleeve
  ・Full length …280mm
  ・Blade Thickness …2.2mm
  ・Weight …461g
  ・For cutting duct, it is not caused any strain.
  ・Cut off a material without any deformation
  ・it can provide finely cutting, the cutting surface donesn't need to be readjusted.
  ・Chip Breaker Addapted

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	125.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Replacement Blade for Hand Nibbler (for EA627) EA627-1

  ESCO

  【Product Specifications】
  ・For EA627 Replacement Blade

  Select to compare

  Configure now
  Starting from∗ ：	41.89 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Replacement Blade for Hand Nibbler (for EA627AC) EA627AC-1

  ESCO

  【Product Specifications】
  ・For EA627AC Replacement Blade

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Seamer Tongue EA627B-2

  ESCO

  【Product Specifications】
  ・Jaw is made of molybdenum steel
  ・Opening depth-26mm
  ・Aperture width-75mm
  ・Specification…Offset type
  ・Overall length…240mm

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	126.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Swivel EA629GZ-1

  ESCO

  【Product Specifications】
  ・Stainless steel
  ・Prevent the rope and cable from fouling.
  ・Load capacity…11.1kN
  ・Length…88.9mm
  ・Slot width…9.5mm

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	682.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Insulated Operation Stick EA631BB-2

  ESCO

  【Product Specifications】
  ・Handle material-Fiberglass (insulated)
  ・Ideal for work for a pole or on a boom lift
  ・-2 and -3 are not equipped with a strap.
  ・Length (m)…1.19 to 2.0m
  ・Weight…650g

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	217.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  4-Direction Roller EA631ED-2

  ESCO

  【Product Specifications】
  ・Aluminum roller.
  ・Suitable cable outer dia.-Dia.80mm
  ・Max safe load-0.98kN(100kgf)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	272.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Square Cable Roller EA631GR-1

  ESCO

  【Product Specifications】
  ・Dim.-185(W) x 85(D) x 280(H)mm
  ・Roller inside dim.-70mm
  ・Weight-1kg

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	420.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Turntable for Cable Drum EA632AE-5

  ESCO

  【Product Specifications】
  ・Load capacity-500kg
  ・Dim.(outer dia. x Inside dia. x thickness)-450 x 360 x 20.5mm
  ・Weight-3.4kg
  ・Cable drum turns around lightly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	211.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cable Jack (2 pcs) EA632HA-60【2 Pieces Per Package】

  ESCO

  【Product Specifications】
  ・Steel
  ・With drum push roller
  ・Lifting capacity-3t
  ・Height…487 to 688mm

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1,278.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cable Jack (with Spindle) (2 pcs) EA632HB-2【2 Pieces Per Package】

  ESCO

  【Product Specifications】
  ・Steel
  ・Variable adjustment with screw jack
  ・-2(with EA632HS-130)
  ・-3(with EA632HS-150)
  ・Lift…2t
  ・Height…450 to 650mm

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1,691.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Insulated Electricians Knife(for Cable) EA640G-2

  ESCO

  【Product Specifications】
  ・Peel without hurting the core.
  ・1000V insulated
  ・Overall length-195mm
  ・Blade length-30mm
  ・With a cap

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	134.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Metal Cutting Shears Holder EA925MJ-2

  ESCO

  【Product Specifications】
  ・Offset Press ・Steel cut Scissors Holder
  ・Material …Leather
  ・Outside Dim …90(W)×45(D)×285(H)mm
  ・Inside Dim …60(W)×35(D)×160(H)mm
  ・Belt Width …60mm
  ・Weight …145g

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.03 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Crimping Die 9749-09

  KNIPEX

  · Crimping Die (for 9743-200).
  · For end sleeves.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	139.33 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Crimping Die 9749-59

  KNIPEX

  · Crimping Die (for 9743-200).
  · For Solar Connector Herios H4 (Amphenol).
  · For sunlight.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	330.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Crimping Die 9749-70

  KNIPEX

  · Crimping Die (for 9743-200).
  · For western plugs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	293.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spare Die 9749-66-6

  KNIPEX

  · Crimping Die (for 9743-200).
  · Solar Connector (for MC4).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	573.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Wire Stripper

  KNIPEX

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	138.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  WEICON Wire Stripper No. 6

  WEICON

  Fully insulated automatic wire stripper for all common stranded and solid conductors of 0.2 - 6 mm2. Adjustable length stop of 5 - 12 mm (removable if required). Approved according to VDE norm for works on live wires up to 1.000 V.

  Select to compare

  Configure now
  Starting from∗ ：	36.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Wire Stripper No. 7 Magic

  WEICON

  Tool for dismantling and stripping, especially designed for all common round cables from 0.5 mm² - 16 mm² (20 - 6 AWG). For all common stranded and solid conductors. PVC-insulated 2-core flat cables from 0.75 mm² - 1.5 mm² (18 - 15 AWG). Built-in, easily accessible side cutter up to 3 mm Ø.

  Select to compare

  Configure now
  Starting from∗ ：	57.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Stripper No. 100

  WEICON

  Universal tool for cable and wire stripping for wide range of cable types. The Stripper allows circular and longitudinal stripping without adjusting the cutting depth. Wellsuited to flush stripping in ceiling and wall areas.

  Select to compare

  Configure now
  Starting from∗ ：	22.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Mini-Duo No. 150

  WEICON

  Fully-insulated automatic wire stripper for all common flexible and solid conductors. Special scanning system adjusts automatically to the wire diameter. Easily accessible built-in side cutter for cables up to 6 mm² (solid conductors up to 4 mm2).

  Select to compare

  Configure now
  Starting from∗ ：	26.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Duo-Stripper No. 200

  WEICON

  The WEICON Duo-Stripper No. 200 is a combination of cable stripper and wire stripper and brings together the functions of a cable stripper and an automatic wire stripper in one tool.
  
  The automatic scanning system means that there is no need to adjust to the cable cross-section.
  
  The Duo-Stripper No. 200 has an optical length scale from 8 - 20 mm and is suitable for all flexible and solid conductors of 0.5 mm² - 6 mm².
  
  Cables with a diameter of 4 - 16 mm or 16 - 28 mm can be stripped easily. The cutting depth can be adjusted infinitely using the knurled screw. The tool has a spare blade in the handle casing.

  Select to compare

  Configure now
  Starting from∗ ：	50.30 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Duo-Crimp No. 300

  WEICON

  The WEICON Duo-Crimp No. 300 can be used to strip conductors and crimp terminals. The automatic scanning system means that there is no need to adjust to the cable cross-section. The Stripper has an optical length scale from 8 - 20 mm and is suitable for all flexible and solid conductors of 0.5 mm² - 6 mm².
  
  The Duo-Crimp No. 300 strips conductors at a length of 5 mm, preventing the individual conductors from splaying. The conductor can then be twisted. Two crimping ranges of 0.5 - 2.5 mm² and 4 - 6 mm² are available for crimping terminals.
  
  An easy-to-reach side cutter is integrated into the Duo-Crimp No. 300 and can be used up to a cable diameter of 6 mm² (solid conductors up to 4 mm²).

  Select to compare

  Configure now
  Starting from∗ ：	57.03 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Multi-Stripper No. 400

  WEICON

  The WEICON Multi-Stripper No. 400 is a universal wire-stripping tool for the following functions: circular cutting, longitudinal cutting, wire stripping, cable stripping and cutting for all common flexible and solid conductors.
  
  The tool allows cables to be stripped easily even in hard-to-reach areas, such as ceiling and wall areas, junction and distribution boxes, and switch cabinets. The integrated contoured blade allows conductor crosssections of 0.5 mm², 0.75 mm², 1.5 mm², 2.5 mm², 4 mm² and 6 mm² to be stripped.
  
  An easy-to-reach side cutter is also integrated into the Multi-Stripper No. 400 and can be used up to a cable diameter of 6 mm (solid conductors up to 4 mm in diameter).

  Select to compare

  Configure now
  Starting from∗ ：	27.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Cable Stripper No. 1000

  WEICON

  The Cable Stripper H.D. No. 1000 is very robust and allows particularly thick cables to be stripped accurately, quickly and safely.
  
  The different layers of multiple-insulated cables can be easily cut open with H.D. No. 1000.
  
  The curved blade tip limits the cutting depth, preventing damage to the conductor. The Stripper is tested for work on live wires in accordance with VDE regulation IEC 60900 and can withstand up to 1000 volts.

  Select to compare

  Configure now
  Starting from∗ ：	67.87 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Wire Stripper No. 7-F

  WEICON

  Tool especially designed for dismantling and stripping all common 2 or 3-core flat cables. Round cables from 0.5 mm² - 10 mm² (20 - 6 AWG) in one working step. From 10 mm², dismantling is possible in two steps. For all common stranded and solid conductors. Built-in, easily accessible side cutter up to 3 mm Ø.

  Select to compare

  Configure now
  Starting from∗ ：	57.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Wire Stripper No. 7 Solar

  WEICON

  Special tool for wire stripping of all kinds of cables in the solar industry. Easily accessible built-in side cutter up to max. 3 mm Ø.

  Select to compare

  Configure now
  Starting from∗ ：	70.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Spare blade set for No. 7 Solar

  WEICON

  1 jaw, black pre-assembled + bottom jaw, black + 1 screw, black + 1 blade + 2 screws

  Select to compare

  Configure now
  Starting from∗ ：	27.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Spare blade set for No. 7 Magic

  WEICON

  2 blades + 4 screws

  Select to compare

  Configure now
  Starting from∗ ：	18.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Spare blade set No. 7-F

  WEICON

  2 blades + 4 screws

  Select to compare

  Configure now
  Starting from∗ ：	18.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Spare blade set for No. 150 / No. 200 / No. 300

  WEICON

  2 blades

  Select to compare

  Configure now
  Starting from∗ ：	8.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Coax-Stripper No. 2

  WEICON

  WEICON Coax Cable Stripper No.2 in blister packaging The Coax-Stripper No. 2 allows two- or three-level stripping of all common coaxial cables, NYM cables and flexible cables. There is no need to adjust the cutting depth. The Coax Stripper No. 2 strips coaxial cables with a diameter of 4.8 ? 7.5 mm, NYM cables of 3 x 0.75 mm² and flexible cables of 10 and 16 mm². When the cable dismantling tool is used, an accurate cutting form is seen during stripping. For example, the cable dismantling tool?s blade on side A can be used to remove the first sheath of a coaxial cable. The inner conductor is then stripped with side B.

  Select to compare

  Configure now
  Starting from∗ ：	18.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Combi-Coax No. 3

  WEICON

  WEICON Combi-Coax No. 3 in blister packaging The Combi-Coax No. 3 allows two- or three-level stripping of all common coaxial cables, NYM cables and flexible cables. There is no need to adjust the cutting depth. The Combi-Coax No. 3 strips coaxial cables with a diameter of 4.8 ? 7.5 mm, NYM cables of 3 x 0.75 mm² and flexible cables of 10 and 16 mm². In addition, the Combi-Coax No. 3 has an easily-accessible side cutter for cables of up to 8 mm in diameter. When the cable dismantling tool is used, an accurate cutting form is seen during stripping. For example, the cable dismantling tool?s blade on side A can be used to remove the first sheath of a coaxial cable. The inner conductor is then stripped with side B.

  Select to compare

  Configure now
  Starting from∗ ：	24.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Round Cable Stripper No. 13

  WEICON

  WEICON Round Cable Stripper No. 13, in blister packaging The Round Cable Stripper No. 13 allows fast and easy stripping specifically for areas which are difficult to access. There is no need to adjust the cutting depth. The Round Cable Stripper No. 13 strips round and continental type cables with a diameter of 8 ? 13 mm. Special tool geometry allows flush stripping even in hard-to-reach areas, such as ceiling and wall areas, junction and distribution boxes, switch cabinets etc.

  Select to compare

  Configure now
  Starting from∗ ：	19.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Quadro-Stripper No. 16

  WEICON

  WEICON Quadro-Stripper No. 16 in blister packaging Stripping and dismantling of all common round cables from 8 - 13 mm ø, hook blade and stripping range are integrated. Fast and easy longitudinal cut due to optimised cable routing in casing. Integrated stripping range for all flexible and solid conductors with the cross sections 0.5 mm², 0.75 mm², 1.5 mm², 2.5 mm², 4.0 mm² and 6.0 mm². Retractable hook blade that can be firmly locked in any position and is easy to exchange.

  Select to compare

  Configure now
  Starting from∗ ：	30.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Dismantling Tool No. 25

  WEICON

  WEICON Dismantling Tool No. 25 (AMS), black/blue, black box The Dismantling Tool No. 25 was developed for stripping cables with sheath thickness of up to 5 mm. The cutting blade can be used for round and length cuttings. For the round cut a minimum cable diameter of 25 mm is necessary. The cutting of the outside insulation will be effected by a slight lever movement and simultaneous pressing of the tooth system to the insulation. This tool consists of a shock-resistant polyamide-body with an integrated, double-sided cutting blade and a connected, movable gear wheel. It enables in a safe way to realise length and round cuttings on the cable isolation. The isolation can be cut either at the end or at an intermediate part of the cable.The cutting-depth can be adjusted step by step from 0 to 5 mm, by turning the screw head (steps of 0,1 mm). The blade form enables the dismantling of the cable sheath including possible aluminium shieldings, until a total thickness of 5 mm. The layers below will not be damaged. The cutting process can be realised even at very low temperatures (-10°C) without difficulties. The tool-blade has a hardness of min. 48 HRC and is easily exchangeable.

  Select to compare

  Configure now
  Starting from∗ ：	227.68 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Data-Strip No. 30

  WEICON

  WEICON Data-Strip No.30 in blister packaging WEICON Data-Strip allows the dismantling of shielded data cables and special purpose cables with a diameter between 4 and 10 mm and an insulation thickness of 0.2 to 1.4 mm. The blade can be adjusted to different insulation strenghts with a small regulating wheel, with this blade it is possible to score slightly the shielding and to remove it easily. The adjustable blade can be renewed if necessary. The working range of the Weicon Data-Strip can be adjusted according to the cable size between Ø 0.2 - 0.8 mm. The tool has an integrated side-cutter for massive cables of up to Ø 8 mm.

  Select to compare

  Configure now
  Starting from∗ ：	32.70 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Electrical Installation Set 1 - No. 13 / No. 300

  WEICON

  • Professional crimping of wire ends
  • Two crimping ranges of 0,5 – 2,5 mm² and 4,0 – 6,0 mm²
  • Meets the requirements of DIN 46228-21: 1992-02
  concerning the withdrawl forces
  • Side cutter for single wires of up to 6 mm²
  • Stripping of 0,5 – 6,0 mm²
  • Dismantling of all common round cables 8 – 13 mm
  • Flush dismantling e.g. at junction and distribution boxes

  Select to compare

  Configure now
  Starting from∗ ：	71.10 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Electrical Installation Set 2 - No. 5 / No. S 4-28

  WEICON

  • Automatic wire stripper for 0,2 – 6,0 mm²
  • Side cutter for single wires of up to 2 mm ø
  • Adjustable length stop for defined
  distances at e.g. WAGO-Clamps
  • Cable stripper with working range of 4 – 28 mm
  • Adjustable cutting blade for round and longitudinal cutting
  • Ideal for the construction of switchboards

  Select to compare

  Configure now
  Starting from∗ ：	47.10 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Electrical Installation Set 3 - No.5 / No. 2

  WEICON

  • Automatic wire stripper for 0,2 – 6,0 mm²
  • Side cutter for single wires of up to 2 mm ø
  • Adjustable length stop for defined distances at
  e.g. connection terminals
  • Two-level stripping of all common coaxial cables
  • Ideal for the installation of SAT systems with multi switches
  • Length scale integrated in the housing
  e.g. for F-connectors
  • Adjustment of cutting depth not necessary

  Select to compare

  Configure now
  Starting from∗ ：	46.70 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Electrical Installation Set 4 - No. 5 / No. 13

  WEICON

  • Automatic wire stripper for 0,2 – 6,0 mm²
  • Side cutter for single wires of up to 2 mm ø
  • Adjustable length stop for e.g. special distances
  • Dismantling of all common round cables from 8 – 13 mm
  • Flush dismantling e.g. at junction and distribution boxes

  Select to compare

  Configure now
  Starting from∗ ：	46.70 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Spare blade for Dismantling Tool No. 25

  WEICON

  Double edge blade

  Select to compare

  Configure now
  Starting from∗ ：	87.47 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Crimping Tool P-726

  HOZAN

  [Features]
  · For bare crimp terminal / bare crimp sleeve (B/P).
  · Compact type geared towards small terminals.
  · Crimping tool with 3 adaptive sizes and a molding check mechanism.
  　*Replacement part: P-726-1 Spring.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	95.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...