Cut-Off Wheels（Product Type：Flat Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Sand Wheel C60
NEWREGISTON
Features a high cutting speed and a stitch structure that prevents clogging and sharpness that is maintained until the end. Perfect for cutting nonmetals such as FRP/PVC/plastic, and thin, lightweight non-ferrous metals such as aluminum and brass.- Volume Discount
Configure nowStarting from∗ ： 3.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cutting Wheel For Disc Grinder【10 Pieces Per Package】
BOSCH
[Features]
· For cutting stainless steel, iron and other metals. Safety design maximum use rpm is 14.5 min-1.
· Special abrasive grain coating greatly increases durability.
· Sharp cut with no burrs at 1‑mm thickness.
· Material does not scorch during high speed cutting.
· Stainless steel also cuts cleanly.- Volume Discount
Configure nowStarting from∗ ： 40.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Cut-Off Wheel【3 Pieces Per Package】
SUMFLEX
The abrasive grain and bonding were improved and foil processing which increases heat dissipation was applied to both sides particularly to increase durability.- Volume Discount
Configure nowStarting from∗ ： 58.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Circular Saw【1-3 Pieces Per Package】
SUMFLEX
The blade is very sharp, like the teeth of a piranha- Volume Discount
Configure nowStarting from∗ ： 14.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Super Cobra Baikiru 125 mm Cutting Grindstone
YAMASHIN SEIKYO
Super Cobra 125 mm has been further improved. Never-before-experienced cutting performance. Speedy cutting.Configure nowStarting from∗ ： 17.89 € Min. Shipping Days ： 42 Days *Unit price with basic configuration
-
Super EC【10 Pieces Per Package】
NORITAKE
It is a high-speed cutting wheel specially developed for the Engine Cutter. Its strength lies in special cutting needed during natural disasters. Design that emphasizes safety, obtaining "special accreditation" in Japan.- Volume Discount
Configure nowStarting from∗ ： 222.95 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Don Hawk Rough Side【25 Pieces Per Package】
NORITAKE
The product is the type with rough surface on the grindstone side. This is a cutoff grindstone with superior cut and durability.- Volume Discount
Configure nowStarting from∗ ： 192.50 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Little Cut【10 Pieces Per Package】
NORITAKE
[Features]
· General purpose popular type cutting grindstone.
· Stainless steel type Little Cut dedicated for stainless steel is also available.- Volume Discount
Configure nowStarting from∗ ： 21.55 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 3.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 4.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 3.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cut-Off Wheel Explorer 0.8 (For Ultra-Thin Cutting)
SAINT-GOBAIN
[Features]
· An ultra-thin cut-off wheel with a thickness of just 0.8 mm. Operates at ultra-high speeds with very little burring or burning of the work material, enabling extremely high precision cutting.
· Particularly effective at cutting materials of 2 mm or less.
[Applications]
· For cutting thin steel plates, angles, thin cylindrical rods, channels, aluminum, stainless steel, thin-walled pipes, etc.- Volume Discount
Configure nowStarting from∗ ： 2.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cut-Off Wheel For Engine Cutters, Chopper 305/355, For General Steel
SAINT-GOBAIN
[Features]
· The perfect combination of smooth performance and aggressive sharpness.
· The use of NORTON technology improves durability.
[Applications]
· For cutting metal such as general steel.- Volume Discount
Configure nowStarting from∗ ： 38.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cut-Off Wheel For Engine Cutters, Chopper 305/355, For Non-Metals
SAINT-GOBAIN
[Features]
· The perfect combination of smooth performance and aggressive sharpness.
· The use of NORTON technology improves durability.
[Applications]
· For cutting non-metals such as cast iron pipes.- Volume Discount
Configure nowStarting from∗ ： 38.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ultra-Thin Cut-Off Wheel Resinoid For Pin Cutters
YAMATO SEITOSYO
[Features]
· Dry/wet dual use.
· A resinoid ultra-thin type cut-off wheel. Tough, resilient and sharp; quickly cuts-off any hard material while also delivering a beautifully finished cut section.
[Applications]
· For cutting pins for metal.- Volume Discount
Configure nowStarting from∗ ： 6.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ultra-Thin Cut-Off Wheel Resinoid For Sample Cutting
YAMATO SEITOSYO
[Features]
· Dry/wet dual use.
· A resinoid ultra-thin type cut-off wheel. Tough, resilient and sharp; quickly cuts-off any hard material while also delivering a beautifully finished cut section.
[Applications]
· For cutting test pieces (Samples) after heat-treating.- Volume Discount
Configure nowStarting from∗ ： 14.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Resinoid Precision Super Thin Cutting Grindstone
YANASE
[Features]
· Size, abrasive grain, granularity, and bonding strength variations are available to support a range of applications.
· Contact us regarding special orders other than standard products.- Volume Discount
Configure nowStarting from∗ ： 50.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 51.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Diamond Cutter
SUMFLEX
[Applications]
It can be used for cutting glass, seashells, tiles, stones, etc.
[Features]
It is used in conjunction with robots and routers.- Volume Discount
Configure nowStarting from∗ ： 77.95 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Precision Cutting Grinding Stone【25 Pieces Per Package】
HEIWATEC
[Features]
· Versatile type most suitable for cutting of a wide range of ferrous materials ranging from hardened steel to mild steel, working especially well for hardened steel.- Volume Discount
Configure nowStarting from∗ ： 228.50 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Theta Mini
NEWREGISTON
[Features]
· Ultra-thin type results in faster cutting speed and significantly improved work efficiency.
· Ultra-thin, there is no burn in the cut, and there is less burr.
· Small-diameter type suitable for narrow places and small areas.
[Applications]
· Cutting general metal small diameter cylindrical rods/pipe/steel plate/square timber/corrugated galvanized iron sheet, etc.- Volume Discount
Configure nowStarting from∗ ： 14.19 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Cutting Disk With Glass Reinforcing Material A【10 Pieces Per Package】
MINITOR
[Features]
· Cut-off wheel that is harder to break and resistant to bending, because of glass fiber reinforcing material.
· Optimal for cutting or shape correction of general steel to alloy steel, titanium alloy, etc.
[Applications]
· For metal- Volume Discount
Configure nowStarting from∗ ： 61.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cutting Disk With Glass Reinforcing Material GC
MINITOR
[Features]
· Cut-off wheel that is harder to break and resistant to bending, because of glass fiber reinforcing material.
· Optimal for cutting or shape correction of general steel to alloy steel, titanium alloy, etc.
[Applications]
· For ceramics/silicon- Volume Discount
Configure nowStarting from∗ ： 76.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cutting Disk With Glass Reinforcing Material DIA
MINITOR
[Features]
· Cut-off wheel that is harder to break and resistant to bending, because of glass fiber reinforcing material.
· Optimal for cutting or shape correction of general steel to alloy steel, titanium alloy, etc.
[Applications]
· For ceramics / carbide alloy- Volume Discount
Configure nowStarting from∗ ： 27.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hybrid 355【10 Pieces Per Package】
RESITON
[Features]
· The outer diameter of the grindstone used is reduced and normal density areas change to variable density areas.
· By the effect of variable density, it can be used throughout while minimizing the deterioration of the peripheral speed and performance deterioration due to grindstone shrinkage.
[Applications]
· SS Type Steel (angle channel)
· SGP Steel Pipe (water supply pipe / gas pipe / plumbing pipe)
· STK Steel Pipe (scaffolding/wiring/structural pipes)
· SUS Steel (stainless steel round/square pipe)
· Flat steel (cold rolled steel plate, thin steel plate)- Volume Discount
Configure nowStarting from∗ ： 128.32 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Hybrid Platinum【10 Pieces Per Package】
RESITON
[Features]
· The outer diameter of the grindstone used is reduced and normal density areas change to variable density areas.
· By the effect of variable density, it can be used throughout while minimizing the deterioration of the peripheral speed and performance deterioration due to grindstone shrinkage.
[Applications]
· SS Type Steel (angle channel)
· SGP Steel Pipe (water supply pipe / gas pipe / plumbing pipe)
· STK Steel Pipe (scaffolding/wiring/structural pipes)
· SUS Steel (stainless steel round/square pipe)
· Flat steel (cold rolled steel plate, thin steel plate)- Volume Discount
Configure nowStarting from∗ ： 117.19 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Stainless Steel / Metal-Use (Double-Sided Reinforcement) Extra【10 Pieces Per Package】
RESITON
- Volume Discount
Configure nowStarting from∗ ： 21.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Super Raicho 0.8 / 1.6【1-10 Pieces Per Package】
FUJI GRINDING WHEEL
[Features]
· Tough and sharp. Both faces are fabric-reinforced for improved safety. The rough periphery face delivers excellent sharpness.
[Applications]
· General steel materials, stainless steel materials (thin plates, thin cylindrical rods, pipes, sashes), ALC- Volume Discount
Configure nowStarting from∗ ： 10.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Product Type |
| work material |
| Abrasive material |
| Particle Size(#) |
| Hardness |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Internal Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NEWREGISTON | BOSCH | SUMFLEX | SUMFLEX | YAMASHIN SEIKYO | NORITAKE | NORITAKE | NORITAKE | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | SAINT-GOBAIN | SAINT-GOBAIN | SAINT-GOBAIN | YAMATO SEITOSYO | YAMATO SEITOSYO | YANASE | SUMFLEX | SUMFLEX | HEIWATEC | NEWREGISTON | MINITOR | MINITOR | MINITOR | RESITON | RESITON | RESITON | FUJI GRINDING WHEEL |
| Product Series | Cut-Off Wheel For Engine Cutters, Chopper 305/355, For General Steel | Cut-Off Wheel For Engine Cutters, Chopper 305/355, For Non-Metals | Cutting Disk With Glass Reinforcing Material A【10 Pieces Per Package】 | Stainless Steel / Metal-Use (Double-Sided Reinforcement) Extra【10 Pieces Per Package】 | |||||||||||||||||||||||||||
| Starting from∗ | 3.33 € *Unit price with basic configuration Volume Discount | 40.62 € *Unit price with basic configuration Volume Discount | 58.11 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 14.29 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.89 € *Unit price with basic configuration | 222.95 € *Unit price with basic configuration Volume Discount | 192.50 € *Unit price with basic configuration Volume Discount | 21.55 € *Unit price with basic configuration Volume Discount | 3.42 € *Unit price with basic configuration Volume Discount | 2.38 € *Unit price with basic configuration Volume Discount | 4.33 € *Unit price with basic configuration Volume Discount | 2.91 € *Unit price with basic configuration Volume Discount | 3.41 € *Unit price with basic configuration Volume Discount | 2.47 € *Unit price with basic configuration Volume Discount | 2.86 € *Unit price with basic configuration Volume Discount | 38.62 € *Unit price with basic configuration Volume Discount | 38.62 € *Unit price with basic configuration Volume Discount | 6.57 € *Unit price with basic configuration Volume Discount | 14.61 € *Unit price with basic configuration Volume Discount | 50.72 € *Unit price with basic configuration Volume Discount | 51.82 € *Unit price with basic configuration Volume Discount | 77.95 € *Unit price with basic configuration Volume Discount | 228.50 € *Unit price with basic configuration Volume Discount | 14.19 € *Unit price with basic configuration Volume Discount | 61.55 € *Unit price with basic configuration Volume Discount | 76.52 € *Unit price with basic configuration Volume Discount | 27.45 € *Unit price with basic configuration Volume Discount | 128.32 € *Unit price with basic configuration Volume Discount | 117.19 € *Unit price with basic configuration Volume Discount | 21.57 € *Unit price with basic configuration Volume Discount | 10.55 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 6 Days | Same day | Same day | 42 Days | 8 Days | 7 Days | 9 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 10 Days | 8 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 11 Days | 20 Days | 6 Days | 6 Days |
| Product Type | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat | Flat |
| work material | Non-metal | Stainless Steel / Cast Iron | General Steel / Stainless Steel / Alloy Steel / Cast Iron / Copper Material / Aluminum | - | General Steel | Cast Iron / Non-metal | General Steel | General Steel | Non-metal | Aluminum | General Steel / Stainless Steel / Alloy Steel / Cast Iron / Copper Material / Aluminum / Non-metal | Stainless Steel | Non-metal | General Steel | - | - | - | - | - | General Steel / Stainless Steel / Alloy Steel / Non-metal | - | - | General Steel | General Steel / Stainless Steel / Aluminum | General Steel / Stainless Steel / Alloy Steel / Copper Material / Aluminum | Non-metal | Non-metal | General Steel / Stainless Steel | General Steel / Stainless Steel | Stainless Steel | General Steel / Stainless Steel |
| Abrasive material | C | - | - | - | - | C / GC | A | A | C | A | AC | ZA | C | A | ZA | A | C | A / WA | WA | A / WA / GC / Other | - | - | - | NX | A | GC | DIA | MA | MA | AZ | AX / SA |
| Particle Size(#) | 60 | - | - | - | - | 24 | 36 | 36 | 60 | 60 | 46 | 60 | 60 | 60 | 60 | 30 | 24 | 80/100 | 120 | 100 ～ 120 | - | - | - | 60 | - | - | - | 30 | 24 | 46 | 36 ～ 60 |
| Hardness | - | - | - | - | - | T | - | P | T | Q | S | V | T | R | V | S | R | N | N | - | - | - | - | S | - | - | - | R | T | S | - |
| Outer Diameter(mm) | 107 | 105 | 38 | 16 ～ 22 | 125 | 305 | 355 | 100 | 105 | 105 | 100 | 105 | 105 | 105 | 105 | 305 ～ 355 | 305 ～ 355 | 150 ～ 205 | 230 ～ 255 | 150 ～ 205 | 75 | 32 | 150 | 58 | 22 ～ 40 | 25 | 20 | 355 | 405 | 105 | 105 |
| Blade thickness(mm) | 2 | 1 | 0.5 | 0.1 ～ 0.6 | 1.3 | 4 | 3 | 2 | 1 | 1 | 2.4 | 1 | 1 | 1 | 0.8 | 4 ～ 4.5 | 4 ～ 4.5 | 0.5 ～ 1 | 1.2 | 0.5 ～ 1 | 1 | 0.6 | 0.5 | 1 | 0.2 ～ 1 | 0.3 | 0.2 ～ 0.3 | 2.8 | 3 | 1 | 0.8 ～ 1.6 |
| Internal Diameter(mm) | 16 | 15 | - | 1 | - | 20 | 25.4 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 20 | 20 | 25.4 | 31.75 | 25.4 | - | - | 25.4 | 9.53 | 1.8 | 1.8 | 1.8 | 25.4 | 25.4 | 15 | 15 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Product Type
- Flat
- Offset Type
-
work material
- General Steel
- Stainless Steel
- Alloy Steel
- Cast Iron
- Copper Material
- Aluminum
- Non-metal
-
Abrasive material
- AX
- MA
- A
- SA
- WA
- Z
- C
- NX
- AZ
- WA
- P
- ZA
- AC
- GC
- DIA
- PA
- Other
-
Particle Size(#)
-
Hardness
- S
- T
- P
- R
- M
- V
- Q
- N
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Internal Diameter(mm)
Brand
-
- RESITON (12)
- TOKEN (8)
- TRUSCO NAKAYAMA (8)
- FUJI GRINDING WHEEL (7)
- NEWREGISTON (7)
- SAINT-GOBAIN (7)
- NORITAKE (6)
- NIPPON RESIBON (5)
- SUMFLEX (4)
- MINITOR (3)
- YANASE (3)
- YAMATO SEITOSYO (2)
- BOSCH (1)
- HEIWATEC (1)
- TJM DESIGN (1)
- YAMASHIN SEIKYO (1)
- AS ONE (0)
- Littelfuse (0)
- DREMEL (0)
- DISCO ABRASIVE SYSTEMS (0)
CAD data type
-
- 2D
- 3D
Categories related to Cut-Off Wheels
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.