SOWA Hinges（Mounting Method：Screw Mounting）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Heikei Hinge With Ring Brass (TTS)/No. 1262 Stainless Steel
SOWA
Square plate-shaped flat hinge made of brass. Embedded bearing. Material and finish details: drawn brass material, nail: stainless steel EN 1.4301 Equiv. (gesintert), polished- Volume Discount
Starting from∗ ： 123.58 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hidden Hinge For RS Type Heavyweight
SOWA
[Material] zinc alloy (Body), steel (arm)
[Finish] Glossy chrome plating- Volume Discount
Starting from∗ ： 114.08 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hidden Hinge With 3D Adjustment Function HES3D-120 Type/V135LGR Type/160 Type/190E Type
SOWA
[Features]
· Provided with a 3D adjustment function enabling fine adjustments in the vertical direction, longitudinal direction, and crosswise direction to be performed easily after installation.
· The hinge can be split between the door and the frame and has a function of temporarily mounting the door to the frame making hanging the door simple.- Volume Discount
Starting from∗ ： 103.53 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
FAD-5 Type Mono Flat (For Lightweight Doors)
SOWA
Optimal for doors that open on a track smaller than hinged doors and for small storage doors such as for bathrooms so the door is not in the way when it is open.
[Set product breakdown] hinge body × 1 piece, 230-P4W-32T seat metal × 2 pieces- Volume Discount
Starting from∗ ： 122.13 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
LIN-X Type Mono Flat Links Hinge
SOWA
Differing from a hinged door, revolutionary door fittings enabling doors to open horizontally
Features
· Mounted to the side panel of the cabinet so items inside can be put in and taken out smoothly.
· The door will stop at an arbitrary position, when it is closed, it has a damper function so it closes slowly.
· Uses the same washer as the slide hinges for the 230 model so can be replaced onto the slide hinges of the 230 model.
· Minute adjustments feasible in 4 directions, vertical, side to side, forward and backward, and parallel.- Volume Discount
Starting from∗ ： 200.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Flush Hinge (Made Of Stainless Steel) (Made Of Steel) (Made Of Brass)
SOWA
[Material] Made of stainless steel (SUS304), made of steel, made of brass
[Finish] Stainless steel polished, GB plating, brass polished
Mounting screw not included- Volume Discount
Starting from∗ ： 62.61 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
HG-RNM30 Type Torque Hinge For Ranmaan
SOWA
· Torque hinge that can be used for indoor rotating ranmaan.
· Door can be attached/detached with a single action and installation is also simple.
· Mounting screws included- Volume Discount
Starting from∗ ： 92.36 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Pivot Hinge PH (Flat) Type/PAW (Frame) Type/PAS (Front Surface) Type
SOWA
[Material] Brass casting (White bronze plating)
[door dimensions] W450 × H700 mm or less
[door weight] PH-50, 60 2.6 kg or less PH-80,95 4 kg or less
Use the left suspension base for the upper right and the right suspension base for the upper left. Please provide 1 right and 1 left for each door.
Mounting screws included- Volume Discount
Starting from∗ ： 95.18 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Corner Hinge (TTS)
SOWA
[Material] brass drawn material
[Finish] Polished, GB plating, white bronze plating
Features of drawn material
■ No seam between the wings and the tube.
■ Finishing is performed using machining and so parts are precise.
■ Thrust surface area is broad compared to a press type hinge and so reduction is low.
■ Particles are fine compared to a cast metal hinge and as there is no casting, the plating and color of the finished surface is exceptional.- Volume Discount
Starting from∗ ： 16.53 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Glass Hinge TTS-5041/TTS-5042【2 Pieces Per Package】
SOWA
Brass glass hinge. The surface treatment is chrome plating. Material and finish details: brass and chrome- Volume Discount
Starting from∗ ： 231.68 € Min. Shipping Days ： 16 Days *Unit price with basic configuration
-
Glass Hinge TTS-5047【2 Pieces Per Package】
SOWA
■ For tempered glass
[Material] Made of brass
[Finish] Chrome
*When installing the door, take out the center shaft and fully tighten the immobilization screw.
Glass thicknesses 10 mm, use 2.0 mm packing
Glass thicknesses 12 mm, use 1.0 mm packing- Volume Discount
Starting from∗ ： 547.20 € Min. Shipping Days ： 16 Days *Unit price with basic configuration
-
Double Acting Spring Hinge For Glass Door (Wall Installation Type) (For Tempered Glass) 787B Type/789B Type
SOWA
Internal components are made of stainless steel (SUS304) and so can be used for shower booths or bathrooms.
Not provided with function of adjusting 0° with the door shut after installation. Move forward with work adjusting the angle of the mounting surface and the glass door.
As this is for a shower booth, do not use it for commercial applications where it will be opened and closed frequently throughout the day (such as between stores).- Volume Discount
Starting from∗ ： 247.06 € Min. Shipping Days ： 16 Days *Unit price with basic configuration
-
For Double Acting Spring Hinge Made Of Stainless Steel BK012-90 Type (Mount To Wall Type) (For Tempered Glass)
SOWA
· Double acting spring hinge made of stainless steel so can be used in proximity of water, such as a shower booth.
· Glass door automatically stops closing at approximately 25°
· No difference for use on right or left sides.
· Be sure to use at least 2.
· Hinge will open to approximately 90° but door will not close from this position. Provide a door stopper separately so the door does not open more than this.
· For cleaning use a neutral detergent, slightly basic detergent, or slightly acidic detergent.- Volume Discount
Starting from∗ ： 202.20 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
For Double Acting Spring Hinge Made Of Stainless Steel BK012B-90 Type (Mount To Wall Type) (For Tempered Glass)
SOWA
· For single seat mounting, bring the front of the glass door close to the side wall of the 3 sided frame.
· Double acting spring hinge made of stainless steel so can be used in proximity of water, such as a shower booth.
· Glass door automatically stops closing at approximately 25°
· No difference for use on right or left sides.- Volume Discount
Starting from∗ ： 202.20 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
For Double Acting Spring Hinge Made Of Stainless Steel BK021-180 Type (Mount To Wall Type) (For Tempered Glass)
SOWA
· Double acting spring hinge for mounting suspension base to immobile glass.
· Double acting spring hinge made of stainless steel so can be used in proximity of water, such as a shower booth.
· Glass door automatically stops closing at approximately 25°
· No difference for use on right or left sides.- Volume Discount
Starting from∗ ： 230.50 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
For Double Acting Spring Hinge Made Of Stainless Steel BK926-90 Type (Mount To Wall Type) (For Tempered Glass)
SOWA
· Double acting spring hinge that opens and closes 90° for mounting suspension base to immobile glass.
· For single seat mounting, bring the front of the glass door close to the side wall of the 3 sided frame.
· Double acting spring hinge made of stainless steel so can be used in proximity of water, such as a shower booth.
· Glass door automatically stops closing at approximately 25°
· No difference for use on right or left sides.- Volume Discount
Starting from∗ ： 230.50 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Main Body Type |
| Flat Hinge Type |
| Detachable Flag Hinges Type |
| Length L *Figure in () is the min length of the adjustable type.(mm) |
| Operating Environment |
| Main Body Material |
| Main Body Surface Treatment |
| Width W(mm) |
| Additional Function |
| Reversed |
| Mounting Method |
| Mounting Screw Hole Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA | SOWA |
| Product Series | Hidden Hinge With 3D Adjustment Function HES3D-120 Type/V135LGR Type/160 Type/190E Type | Flush Hinge (Made Of Stainless Steel) (Made Of Steel) (Made Of Brass) | Pivot Hinge PH (Flat) Type/PAW (Frame) Type/PAS (Front Surface) Type | |||||||||||||
| Starting from∗ | 123.58 € *Unit price with basic configuration Volume Discount | 114.08 € *Unit price with basic configuration Volume Discount | 103.53 € *Unit price with basic configuration Volume Discount | 122.13 € *Unit price with basic configuration Volume Discount | 200.61 € *Unit price with basic configuration Volume Discount | 62.61 € *Unit price with basic configuration Volume Discount | 92.36 € *Unit price with basic configuration Volume Discount | 95.18 € *Unit price with basic configuration Volume Discount | 16.53 € *Unit price with basic configuration Volume Discount | 231.68 € *Unit price with basic configuration Volume Discount | 547.20 € *Unit price with basic configuration Volume Discount | 247.06 € *Unit price with basic configuration Volume Discount | 202.20 € *Unit price with basic configuration Volume Discount | 202.20 € *Unit price with basic configuration Volume Discount | 230.50 € *Unit price with basic configuration Volume Discount | 230.50 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 9 Days | 9 Days | 9 Days | 10 Days | 10 Days | 9 Days | 10 Days | 10 Days | 10 Days | 16 Days | 16 Days | 16 Days | 12 Days | 11 Days | 11 Days | 11 Days |
| Main Body Type | Flat Hinges | Hidden Type | Hidden Type | Hidden Type | Hidden Type | Flat Hinges | Damper/Torque/Spring Hinge | Pivot Type | Flat Hinges | Glass Hinges | Glass Hinges | Glass Hinges | Glass Hinges | Glass Hinges | Glass Hinges | Glass Hinges |
| Flat Hinge Type | Square Plate Type | - | - | - | - | Long Hinges | - | - | Square Plate Type | - | - | - | - | - | - | - |
| Detachable Flag Hinges Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length L *Figure in () is the min length of the adjustable type.(mm) | 102 ～ 153 | 95.3 ～ 139.7 | 120 ～ 190 | 222.3 | 264 ～ 340 | 2,000 ～ 2400 | 85 | 50 ～ 95 | 25 ～ 125 | 40 ～ 50 | 60 | 77 ～ 90 | 90 | 90 | 90 | 90 |
| Operating Environment | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance |
| Main Body Material | Brass | Zinc Alloy | Steel / Zinc Alloy | - | - | Stainless Steel / Steel / Brass | Stainless Steel | Brass | Brass | Brass | Brass | Brass | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Main Body Surface Treatment | - | Chrome Plating | - | - | - | - | Not Provided | - | - | Chrome Plating | Chrome Plating | Chrome Plating | Satin / Mirror Surface | Satin / Mirror Surface | Satin / Mirror Surface | Satin / Mirror Surface |
| Width W(mm) | 102 ～ 153 | 51.6 ～ 97.5 | 62 ～ 83.7 | - | - | 25 ～ 100 | 30 | 13 ～ 80 | 27 ～ 82 | 60 ～ 100 | 125 | 65 ～ 71 | - | - | 114 | 78 |
| Additional Function | Bearing Built-in | Not Provided | Others | With Damper / Others | With Damper / With Fixing Function | Not Provided | With Stopper / With Torque Function | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | With Stopper | With Stopper | With Stopper | With Stopper |
| Reversed | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | - | For Both Right and Left Sides | - | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides | For Both Right and Left Sides |
| Mounting Method | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting | Screw Mounting |
| Mounting Screw Hole Type | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes / Others | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Countersunk Holes | Others | Others |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Main Body Type
-
Flat Hinge Type
-
Detachable Flag Hinges Type
-
Length L *Figure in () is the min length of the adjustable type.(mm)
- 2,000
- 6
- 6.5
- 10
- 17
- 18
- 19
- 20
- 21
- 22
- 23.5
- 24
- 25
- 25.5
- 26
- 27.5
- 29
- 30
- 30.5
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 38
- 39.5
- 40
- 40.5
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 48.5
- 49.5
- 50
- 50.5
- 51
- 52
- 53
- 54
- 54.5
- 55
- 56
- 57
- 59
- 60
- 61
- 62
- 63
- 63.4
- 63.5
- 64
- 65
- 66
- 67
- 68
- 70
- 71
- 71.7
- 72
- 73
- 75
- 75.5
- 76
- 76.5
- 76.7
- 77
- 78
- 79
- 80
- 81
- 81.7
- 82
- 83
- 84
- 85
- 86
- 86.7
- 87
- 87.5
- 88
- 89
- 90
- 92
- 94
- 95
- 95.3
- 96
- 96.5
- 97
- 100
- 101
- 101.2
- 101.5
- 101.7
- 102
- 103
- 104
- 106
- 107
- 108
- 109
- 110
- 113
- 114
- 114.5
- 115
- 117.5
- 118
- 120
- 121
- 123
- 124
- 125
- 126
- 126.5
- 127
- 130
- 132
- 132.5
- 135
- 138
- 139
- 139.7
- 140
- 144
- 145
- 148
- 149
- 150
- 151
- 152
- 152.5
- 153
- 154
- 155
- 158
- 160
- 161
- 161.5
- 162
- 170
- 180
- 183
- 184
- 186
- 186.4
- 190
- 200
- 201
- 204
- 210
- 222.3
- 224
- 225
- 250
- 258
- 264
- 289.3
- 300
- 340
- 350
- 400
- 442
- 450
- 476
- 576
- 600
- 626
- 750
- 850
- 900
- 1000
- 1200
- 1800
- 1829
- 1872
- 2000
- 2133
- 2400
- 2500
-
Operating Environment
- Standard
- Corrosion Resistance
- Abrasion Resistance
- Cleanroom
-
Main Body Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Zinc Alloy
- Resin
-
Main Body Surface Treatment
-
Width W(mm)
-
Additional Function
-
Reversed
-
Mounting Method
-
Mounting Screw Hole Type
Narrow search by specifying Brand
-
- MISUMI (32)
- FUJI LATEX (25)
- SOWA (16)
- TRUSCO NAKAYAMA (14)
- TOK BEARING (10)
- HILOGIK (5)
- WAKISANGYO (5)
- BEST (2)
- KYODO KINZOKU (1)
- IMAO CORPORATION (1)
- TAKIGEN (1)
- ESCO (0)
- HALDER (0)
- 999SHIMANO (0)
- ACCURATE (0)
- ELESA (0)
- NORELEM (0)
- GANTER (0)
- KIPP (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Hinges
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.