DAIWARASHI Adjuster（Type：Adjusting Bolt Type）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.- Volume Discount
- 2D CAD data available
Starting from∗ ： 6.01 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Anchor Fixing, Screw Part Non-Shake D-J-E II
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Volume Discount
- 2D CAD data available
Starting from∗ ： 8.50 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Standard Receiver Type Adjuster D-A / D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- Volume Discount
- 2D CAD data available
Starting from∗ ： 3.99 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Anchor Fixing D-E II /D-E II-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- Volume Discount
- 2D CAD data available
Starting from∗ ： 7.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster, Rubber Receiver Type D-G / D-G II
DAIWARASHI
An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
[Features]
· A rubber cover is used for the entire receiver, and an iron core is included inside.- Volume Discount
- 2D CAD data available
Starting from∗ ： 15.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights (Wide Receiver Type) D-C III /D-C III/S / D-C III-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- 2D CAD data available
Starting from∗ ： 13.99 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65
DAIWARASHI
A standard type adjuster in which the adjuster base is compact
[Features]
· An adjuster whose pedestal part is a compact type.
· The screw rotates and tilts somewhat.
· Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.- Volume Discount
- 2D CAD data available
Starting from∗ ： 4.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V
DAIWARASHI
[Features]
· It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
· A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
· Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."- Volume Discount
- 2D CAD data available
Starting from∗ ： 10.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Anchor Fixing (Thrust Bearing Equipped) WD-E II
DAIWARASHI
An adjuster for anchor fixing that features a thrust bearing capable of smooth leveling even when a load is applied. Note: Please be advised that the model number in VONA has been changed from "WD-E II" to "WD-E2."- Volume Discount
- 2D CAD data available
Starting from∗ ： 9.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable
[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat- Volume Discount
- 2D CAD data available
Starting from∗ ： 20.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A
DAIWARASHI
A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Volume Discount
- 2D CAD data available
Starting from∗ ： 14.95 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Slopes D-U-A
DAIWARASHI
A standard type adjuster for slopes in which the screw shaft part tilts even more.
[Features]
The receiver part has a larger hole· than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· When M12/M16/M20 bolts are used, in the case of M16/M20, it is limited to about 15° since the hexagonal part comes in contact with the spherical portion.- Volume Discount
- 2D CAD data available
Starting from∗ ： 16.98 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Slopes, for Anchor Fixing D-U-E II
DAIWARASHI
An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
[Features]
· The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· M12/M16/M20 bolts can be used.
· The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°- Volume Discount
- 2D CAD data available
Starting from∗ ： 13.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster with Bottom Part Rubber for Light Vibration-Proofing (Thrust Bearing Equipped) WD-A III /WD-B III
DAIWARASHI
An adjuster for light vibration-proofing with a thrust bearing that enables smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A III" to "WD-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bolt bottom.
· A nylon washer is used between the receiver and bolt. and rotation is smooth.
· Suitable for office equipment, etc.- Volume Discount
- 2D CAD data available
Starting from∗ ： 9.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights D-C / D-C / S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- Volume Discount
- 2D CAD data available
Starting from∗ ： 6.98 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights with Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- 2D CAD data available
Starting from∗ ： 9.19 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- Volume Discount
- 2D CAD data available
Starting from∗ ： 71.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- Volume Discount
- 2D CAD data available
Starting from∗ ： 43.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- 2D CAD data available
Starting from∗ ： 17.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R
DAIWARASHI
A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- 2D CAD data available
Starting from∗ ： 49.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R
DAIWARASHI
A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
· Has a larger outer diameter than D-C-R and feels more stable and heavy.- Volume Discount
- 2D CAD data available
Starting from∗ ： 23.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Standard Receiver Adjuster with Plastic D-A II /D-B II
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- Volume Discount
- 2D CAD data available
Starting from∗ ： 7.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- Volume Discount
- 2D CAD data available
Starting from∗ ： 3.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Walls D-D I
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- Volume Discount
- 2D CAD data available
Starting from∗ ： 4.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height h(mm) |
| Thread Nominal M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Product Series | Adjuster for Heavy Weights (Wide Receiver Type) D-C III /D-C III/S / D-C III-W | Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65 | Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V | Adjuster for Anchor Fixing (Thrust Bearing Equipped) WD-E II | Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A | Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R | Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S | Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R | Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R | |||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 6.01 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.50 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 3.99 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.12 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.24 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 13.99 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 4.81 € *Unit price with basic configuration Volume Discount | 10.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.35 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 20.90 € *Unit price with basic configuration Volume Discount | 14.95 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 16.98 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 13.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 6.98 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.19 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 71.86 € *Unit price with basic configuration Volume Discount | 43.81 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 17.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 49.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 23.14 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.36 € *Unit price with basic configuration Volume Discount | 3.11 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 4.73 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day |
| Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type |
| Adjusting Bolt Shape Type | With Rubber Foot | Rubber Foot & Anchor Bolt Fixing Type | Standard | Rubber Foot & Anchor Bolt Fixing Type | With Rubber Foot | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing | Rubber Foot & Anchor Bolt Fixing Type | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing | Standard | With Rubber Foot | Built-in Bearing | Built-in Bearing | Standard | Built-in Bearing | With Rubber Foot | Standard | Standard | Anchor Bolt Fixing Type |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - | 15 | 35 | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Material | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel |
| Thread Surface Treatment | Electroplating / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chrome Plating | Bright Chrome Plating | Trivalent Chromate | Trivalent Chromate | Others | Bright Chrome Plating | Bright Chrome Plating / Others | Electroplating | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others | Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others |
| Body Material | Steel | Steel | Steel | Steel | Synthetic Rubber (EPDM Synthetic Rubber) | Stainless Steel / Cast Iron | Steel | Steel | Steel | Steel | - | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel / Steel | Stainless Steel / Cast Iron | Stainless Steel | Stainless Steel / Cast Iron | Steel | Steel | Steel |
| Main Body Surface Treatment | Coating / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Not Provided | Trivalent Chromate / Others | Bright Chrome Plating | Bright Chrome Plating | Trivalent Chromate | Trivalent Chromate | Others | Bright Chrome Plating | Bright Chrome Plating / Others | Coating | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others | Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others |
| Bottom Rubber Material | Chloroprene Rubber / Ethylene Propylene Rubber / Silicone | - | - | - | - | - | - | - | - | - | - | - | - | Chloroprene Rubber | - | Chloroprene Rubber | Chloroprene Rubber | - | - | Chloroprene Rubber | Chloroprene Rubber | ABS Resin | ABS Resin | - |
| Thread Length L1(mm) | 50 ～ 200 | 50 ～ 180 | 50 ～ 200 | 50 ～ 200 | 100 ～ 180 | 100 ～ 200 | 75 ～ 120 | 65 | 100 | 130 ～ 150 | 100 ～ 150 | 180 | 100 ～ 150 | 70 ～ 130 | 50 ～ 200 | 50 ～ 200 | 150 | 100 ～ 200 | 200 ～ 300 | 150 | 100 ～ 180 | 75 ～ 200 | 50 ～ 100 | 75 ～ 150 |
| Main Body Height h(mm) | 13 ～ 17 | 17 | 15 ～ 18 | 17 ～ 19 | 25 ～ 30 | 22 ～ 23 | 14 | 17 | 17 | 19 | 15 ～ 18 | 18 | 17 | 15 ～ 17 | 17 | 22 | 37 | 29.5 ～ 36.5 | 17 ～ 22 | 22 | 27 | 18 ～ 22 | 12.5 ～ 13.5 | 14 ～ 18 |
| Thread Nominal M(mm) | 8 ～ 20 | 12 ～ 16 | 12 ～ 20 | 12 ～ 20 | 16 ～ 20 | 16 ～ 30 | 12 | 16 | 12 | 16 | 12 ～ 16 | 20 | 12 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 24 | 20 ～ 30 | 12 ～ 24 | 20 | 16 | 12 ～ 16 | 8 ～ 10 | 12 ～ 16 |
| Properties | Corrosion Resistance / Vibration Control | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Vibration Control | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard | Standard | Vibration Control | Standard | Standard / Corrosion Resistance / Vibration Control | Standard | Standard / Corrosion Resistance | Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Type
- Adjusting Bolt Type
- Mounting Type
- Precision Instrument Type
- With Automatic Height Adjusting Function
- Leg End
- Others
- Adjusting Screw with Rubber Grommet
-
Adjusting Bolt Shape Type
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 5
- 7
- 9
- 11
- 11.5
- 11.6
- 13.5
- 14
- 15
- 16
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 38.5
- 39.5
- 40
- 41
- 43
- 43.5
- 45
- 45.5
- 47
- 48.5
- 49
- 49.5
- 50
- 51
- 52
- 52.5
- 53
- 54
- 55
- 56
- 58
- 58.5
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 65
- 65.5
- 66
- 67
- 67.5
- 68
- 68.5
- 69
- 69.5
- 70
- 71
- 72
- 75
- 78
- 79
- 80
- 85
- 90
- 91
- 93.5
- 95
- 95.5
- 97
- 98
- 99
- 99.5
- 100
- 103.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 143.5
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 225
- 250
- 280
- 300
-
Main Body Height h(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 58~70
- 60
- 60.5
- 61
- 62
- 63
- 64
- 64.5
- 65
- 65~79
- 65.5
- 66
- 67
- 67.5
- 68
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78
- 78.5
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 85.5
- 87
- 88
- 89
- 90
- 92
- 93
- 93.5
- 94
- 95
- 97
- 98
- 99
- 100
- 101
- 101.5
- 105
- 107
- 110
- 112
- 115
- 117.5
- 119
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 156
- 157
- 158
- 160
- 161
- 165
- 166
- 170
- 171
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 190
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
-
Thread Nominal M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
-
Swivel Mechanism
Narrow search by specifying Brand
-
- MISUMI (15)
- DAIWARASHI (24)
- TAKIGEN (23)
- IMAO CORPORATION (19)
- NABEYA (19)
- ELESA (5)
- NABEYA BI-TECH (5)
- TRUSCO NAKAYAMA (5)
- WAKISANGYO (5)
- RICH ENGINEERIN (3)
- GIFU SANKEN KOGYO (2)
- OHNORUBBER (2)
- HALDER (2)
- WOOJIN (2)
- SHIMIZU (2)
- 999SHIMANO (1)
- IWATA MFG (1)
- NANSIN (1)
- SUN FASTENER (1)
- YAHATA NEJI (1)
- ESCO (0)
- EUROFLEX (0)
- MAEDLER (0)
- AMF (0)
- SUNCO (0)
- GANTER (0)
- KIPP (0)
- NORELEM (0)
- KURASHIKI KAKO (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Adjuster
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.