GANTER Indexing Plungers（Body Material：Steel）

Narrow search by specifying Type

Standard Knob
Lever Type
With Side Flange
With Ring
With Vertical Flange
Related Components
W/o Knob
Special Knobs

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Promotional pricing

Spring latches with flange for surface mounting / GN 722.2

GANTER

Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel, with knob, with and without rest position

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing Plungers / Removable / Steel / GN 817.8

GANTER

Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	12.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Mini indexing plungers, open indexing mechanism

GANTER

Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Indexing plungers with rest position, for thin walled equipment

GANTER

Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	20.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing Plungers / Steel / GN 7017

GANTER

GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers for welding, with rest position

GANTER

Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.

A notch keeps the plunger in this position.

The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.

The lug d2 is intended for positioning.

The plastic knob with the in-moulded indexing pin is driven on after the welding process.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, covered indexing mechanism, with red knob

GANTER

Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With type C the knob can be turned by 30° and a notch keeps the knob in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel / Plastic-knob / with rest position

GANTER

Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, open indexing mechanism, with red knob

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.40 €
	Special price
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers for thin walled equipment

GANTER

Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers for welding, without rest position

GANTER

Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel / Plastic-knob / without rest position

GANTER

Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, covered indexing mechanism

GANTER

Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Type
Locking Mechanism
Mounting Method
Overall Length
Body Material
All Stainless
Tip Material
Body O.D./Thread M(mm)
Stroke S(mm)
Tip Surface Treatment
Tip Heat Treatment
Tip O.D. d(Ø)
Length L(mm)

	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing			Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing
Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Spring latches with flange for surface mounting / GN 722.2	Indexing plungers, Steel, with knob, with and without rest position	Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit	Indexing Plungers / Removable / Steel / GN 817.8	Mini indexing plungers, open indexing mechanism	Indexing plungers with rest position, for thin walled equipment	Indexing Plungers / Steel / GN 7017	Indexing plungers for welding, with rest position	Mini indexing plungers, covered indexing mechanism, with red knob	Indexing plungers, Steel / Plastic-knob / with rest position	Mini indexing plungers, open indexing mechanism, with red knob	Indexing plungers for thin walled equipment	Indexing plungers for welding, without rest position	Indexing plungers, Steel / Plastic-knob / without rest position	Mini indexing plungers, covered indexing mechanism
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	13.78 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.08 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.40 € *Unit price with basic configuration Volume Discount	20.32 € *Unit price with basic configuration Volume Discount	6.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.66 € *Unit price with basic configuration Volume Discount	5.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.40 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	Same day	7 Days	7 Days	Same day	7 Days	Same day	Same day	7 Days	Same day	Same day	Same day	Same day
Type	With Side Flange	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Locking Mechanism	With Locking Nose	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	Flange	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall Length	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body Material	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
All Stainless	Not Compliant	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Material	Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body O.D./Thread M(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	14	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Surface Treatment	Zinc Plating	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Heat Treatment	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip O.D. d(Ø)	8 ～ 14	3 ～ 10	3 ～ 10	7 ～ 12	4 ～ 7	6 ～ 8	4 ～ 10	6 ～ 8	4 ～ 7	6 ～ 8	4 ～ 7	6 ～ 8	6 ～ 8	6 ～ 8	4 ～ 7
Length L(mm)	68	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Locking Mechanism
- Not Provided
- With Locking Nose
- Without Locking Nose
Images

Clear

Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
Clear

Overall Length
- Standard
- Short
Clear

Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Polyamide
- Others
Clear

All Stainless
- Applicable
- Not Compliant
Clear

Tip Material
- Steel
- Stainless Steel
Clear

Body O.D./Thread M(mm)
3

5

6

8

10

M10

12

M12

14

14.5

16

M16

18

20

M20

22

24
Drawing

Clear

Stroke S(mm)
3.5

4

5

5-9

6

6-10

7

7.5

8

9

9.5

10

12

14

15

16

18

19

20

24

25
Drawing

Clear

Tip Surface Treatment
- Not Provided
- Black Oxide
- Trivalent Chromate
- Electroless Nickel Plating
- Nickel Plating
- Others
- Zinc Plating
Clear

Tip Heat Treatment
- Not Provided
- Hardened
- Carburized
Clear

Tip O.D. d(Ø)
2

2.5

3

4

5

6

7

7.1

8

M8 x 1

8.28

10

M10 x 1

11.52

12

M12 x 1,5

14

15.49

16

M16 x 1,5

18

19.7

20

M20 x 1,5

22

25

30

60

80
Drawing

Clear

Length L(mm)
25

26.5

29.5

30

30.5

31

31.5

32

33

34

34.5

35

36

37

37.5

38

38.5

39

40

40.5

41

41.5

41.7

42

42.5

43

43.5

44

44.5

45

46

46.5

47

47.5

48

49

50

51

51.7

52

53

54

54.5

54.7

56

56.5

57

57.25

57.5

58

58.5

59

59.5

60.4

60.5

61

62

63

63.5

64.5

65

66

67.5

68

68.5

69

70

70.5

71

72

72.5

73

74

75

75.5

76

77

79

80

80.5

82

83

84

85

86.5

91

92

98.5

99.9

102.5

123
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (17)
- Cost Efficient Products ()
- NORELEM (81)
- KIPP (81)
- GANTER (15)
- IMAO CORPORATION (14)
- KONISHI MFG (14)
- NABEYA (1)
- HALDER (1)
- TOSHIN CASTER (1)
- NABEYA BI-TECH (0)
- ELESA (0)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Narrow search by specifying lead time

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less
Clear