GANTER Universal Joints

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Universal joints with friction bearing

GANTER

The permissible r.p.m. of universal joints with friction bearing DIN 808 is to a large extent dependent on the type of application such as load, duration, angular disposition as well as lubrication . For over 1000 r.p.m. universal joints with needle bearing should be used
For continuous use ample lubrication is essential. This achieved by fitting the joint with a grease filled gaiter GN 808.1.

Volume Discount

Starting from^∗ ：	37.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Universal joint shafts with needle bearing

GANTER

Universal joint shafts with needle bearing GN 808.3 do not only bridge the misaligenment of two shafts, they also provide a length compensation which, in turn, allows the appropriate extraction length l2 as factor of the total length l1. The power transmission is achive-bed by two universal joints DIN 808 (type EW) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connecting the splined shaft to the sliding sleeve.
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	474.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Universal joints with needle bearing

GANTER

The permissible r.p.m. of universal joints with needle bearings DIN 808 is higher than for those with friction bearings, but is still dependent on the load, duration of use as well as angular disposition. Ideal applications allow speeds of up to 4000 r.p.m.
Needle bearings give the universal joints at 3° to 5° angular disposition a considerably higher degree of efficiency than those fitted with friction bearings. The needle bearings have a permanent lubrication and thus do not require servicing.
Infomation regarding the selection of universal joints with needle bearing.

Volume Discount

Starting from^∗ ：	74.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Universal joint shafts with friction bearing

GANTER

Universal joint shafts with friction bearing GN 808.2 not only join the offset between two shafts, but also enable the alignment of lengths, which depending on the overall length l1 enables the corresponding extraction length l2. The power transmission is achieved by two universal joints DIN 808 (type EG) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connec-ting the splined shaft to the sliding sleeve:
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	286.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Universal joints for ordinary applications

GANTER

Universal joints GN 9080 are a simple and very competitively priced variant.
They can only be used for applications with low revolutions. Typical applications are all types of manual operations such as the adjustment of louvers.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Universal joints with friction bearing, Stainless Steel

GANTER

Since the moveable parts are not surface treated, i.e. not case hardened, the possibilities of application of these universal joints are much more limited compared to the ones made of standard steel. Therefore, the guide lines for the selection of universal joints with friction bearing according to the diagram may be applied at a limited extent only. Rotational speeds over 200 min may become critical.
For continuous use of the Stainless Steel-Universal joints, ample lubrication is very important. This achieved by fitting the joint with a grease filled gaiter GN 808.1.
The order example refers to universal joints with equal bores both ends d2 and s.

Volume Discount

Starting from^∗ ：	109.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240.1

GANTER

Quick-fit couplings GN 240.1 have been designed for the purpose of compensating a radial shaft off-set (x). A typical application is the axial link to a piston rod of a cylinder operating in any type of fixture or system.
The coupling is not designed for the transfer of torque.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	76.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Quick- fit couplings with angle- and radial off-set compensation / Steel / M6-M20 / GN 240.2

GANTER

Quick-fit couplings GN 240.2 have been designed to compensate a radial and angular off-set. Furthermore they are axially freely adjustable via the set screw.
A typical application is the axial link to a piston rod of a cylinder operating in any type of fixture or system.
The coupling is renowned by its very compact construction without any loose components.
It is not designed for the transfer of torque.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	116.46 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240

GANTER

Quick-fit couplings GN 240 have been designed for the purpose of compensating a radial shaft off-set (x). A typical application is the axial link to a piston rod of a cylinder operating in any type of fixture or system.
The coupling is not designed for the transfer of torque.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	54.76 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Type
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D1(Ø)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Max. Rotational Speed Range(r/min)
Feature
Body Material
Application
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

					Promotional pricing	Promotional pricing
Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Universal joints with friction bearing	Universal joint shafts with needle bearing	Universal joints with needle bearing	Universal joint shafts with friction bearing	Universal joints for ordinary applications	Universal joints with friction bearing, Stainless Steel	Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240.1	Quick- fit couplings with angle- and radial off-set compensation / Steel / M6-M20 / GN 240.2	Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240
CAD		2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D
Starting from^∗	37.36 € *Unit price with basic configuration Volume Discount	474.82 € *Unit price with basic configuration Volume Discount	74.90 € *Unit price with basic configuration Volume Discount	286.60 € *Unit price with basic configuration Volume Discount	13.72 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	109.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	76.36 € *Unit price with basic configuration Volume Discount	116.46 € *Unit price with basic configuration Volume Discount	54.76 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	7 Days	7 Days	7 Days	7 Days	Same day	Same day	7 Days	7 Days	7 Days
Type	-	-	-	-	-	-	-	-	-
Allowable Torque Range(N•m)	-	-	-	-	-	-	-	-	-
Shaft Bore Dia. (machined) D1(Ø)	6 ～ 32	10 ～ 30	10 ～ 32	10 ～ 30	B 8 ～ B 20	6 ～ 25	-	-	-
Shaft Bore Dia. (machined) D2(Ø)	-	-	-	-	-	-	-	-	-
Outer Dia. A(Ø)	16 ～ 58	22 ～ 58	22 ～ 58	22 ～ 58	13 ～ 32	16 ～ 50	-	-	-
Overall Length W(mm)	-	-	-	-	-	-	-	-	-
Max. Rotational Speed Range(r/min)	-	-	-	-	-	-	-	-	-
Feature	-	-	-	-	-	-	-	-	-
Body Material	-	-	-	-	-	Stainless Steel	-	-	-
Application	-	-	-	-	-	-	-	-	-
Allowable Torque(N•m)	-	-	-	-	-	-	-	-	-
Max. Rotational Speed(r/min)	-	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment Range(mm)	-	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment(mm)	-	-	-	-	-	-	-	-	-
Allowable Angular Misalignment(deg)	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Type
- With Slit
- Others
- Standard Type
- Shaft Type
- Flexible Type
- Maintenance Components
Images

Clear

Allowable Torque Range(N•m)
0.05 to 1.00

1.01 to 3.00

3.01 to 5.00

5.01 to 10.00

10.01 to 20.00

20.01 to 50.00

50.01 to 100.00

100 to Less Than 500
Clear

Shaft Bore Dia. (machined) D1(Ø)
1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

5.9

6

6.35

7

8

B 8

8.4

9

9.525

9.9

10

B 10

11

12

B 12

14

15

16

B 16

17

18

19

20

B 20

22

23

25

27

30

31

32

35

38

40

45

50

60
Drawing

Clear

Shaft Bore Dia. (machined) D2(Ø)
2

3

4

5

6

6.35

7

8

9

9.525

10

11

12

14

15

16

18

19

20

22
Drawing

Clear

Outer Dia. A(Ø)
2

3

5

5.6

6

7.1

8

8.6

10

11

11.1

11.4

12

12.5

13

14

14.3

15

16

17.5

18

19

19.1

20

22

23

23.8

24

25

26

28

28.5

29

30

32

33

35

35.1

36

36.5

37

38

39

40

42

44

45

46

47

47.8

48

50

51

52

54

55

57

58

60

70

78

80

88

90

95

98

100

115

118

120
Drawing

Clear

Overall Length W(mm)
9

12

15

16

18

19.1

19.4

20

22.2

23.4

24

24.2

25.4

26.4

27

27.2

28

28.5

30

30.4

31

32

33.4

34

34.9

35

35.3

35.6

36

37.6

38.1

39

40

41.4

41.7

42

43

44

44.5

45

45.6

46.2

48

49.5

50

50.8

50.9

51

51.4

52

52.4

53.3

54

54.1

56

58

59

60

61.2

62

62.1

63.5

64

65

66.6

67.5

67.6

68

69.7

70

71

72

73

73.2

74

75

75.5

76

76.2

80

81

82

83

84

86

87

88

89.8

90

92

94

94.5

95

96

98.6

100

102

104

105

105~232

108

112

117.5

120

122

122~237

124

125

126

127

129

130

130.5~238

131~250

132~245

134

136~269

136.5~244

139

140

143

144

144~275

145

147.5~402

148.5~252

149

150

153

155.5~409

156

158

160

162~270

163

163~265

164

164~283

165

167

168

168~287

168.5~266.5

175

175.5~423.5

176~297

178

179~418

180

180~277

180.5~423.5

182

185~423

187.5~433

190

192

192~360

194~309

195

198~366

200

206

207~440

212

212~321

212~440

219~373

219~450

220

220~547

224~325

224~551

228

231~458

233~331

241~391

242~561

244~404

248

248~567

250

257~575

259~403

262~580

264~351

265~577

268~584.5

269~422

270

270~444

275

283~593

284~454

288~599

290

294~794

295~602

298

299~436

300

305~535

307~533

310

312~808.5

316~480

318~621.5

319~811

324~806

326

329~819

330~451

335~842

340

340~1018

343~638.5

345~575

349~581

350

353~1036

355~842

355~1040

360~1034

380~500

383~528

388~528

390

395~1065

397~599

399~599

399~617

401~1072

403~878

403~880.5

407~605

425~1094

426

434~645

437~1101

441~645

444~1094

444~1095

458~1095

465~1122

465~1125.5

485

517~685

520~1136

530~1164

546~711

553~711

556~1185

556~1188.5

588~1182

650~1223

690~1255

760~1312
Drawing

Clear

Max. Rotational Speed Range(r/min)
1,001 to 2,000

4,001 to 10,000

10,001 to 78,000

Less Than 100

100 to 300

301 to 1,000

2001 to 4,000
Clear

Feature
Heat Resistant

High Accuracy

High Durability

High Torque

High Torsional Rigidity

Low Moment of Inertia

No Backlash

Small
Clear

Body Material
Alloy

Aluminum

Aluminum Alloy

Resin

Stainless Steel

Steel
Clear

Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
Clear

Allowable Torque(N•m)
0.08

0.11

0.12

0.16

0.25

0.36

0.392

0.4

0.45

0.5

0.59

0.6

0.7

0.85

1

1.078

1.30

1.5

1.60

1.80

1.862

2

2.2

2.30

2.8

3.40

3.5

5

5.3

5.6

8.50

10

10.7

11.6

20

20.1

25

27.4

33

46

66

76

102

129

132

175

330

495
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
Clear

Max. Rotational Speed(r/min)
90

110

140

150

160

180

190

200

210

220

230

240

260

270

280

290

300

310

330

340

360

370

380

390

410

430

440

450

460

470

480

500

510

530

560

570

580

600

630

640

650

670

680

690

700

720

730

740

750

770

780

800

810

830

850

880

900

950

1000

1100

1150

1200

1250

1300

1400

1450

1500

1700

1800

1900

2000

2100

2200

2500

3000

3500

4000

5000

6000

7000

9000

10000

12000

16000

18000

21000
Clear

Allowable Lateral Misalignment Range(mm)
0.02 to 0.2

0.21 to 0.40

0.41 to 1.0

1.1 to 3.0

5.1 to 100
Clear

Allowable Lateral Misalignment(mm)
0.2

0.3

0.4

0.5

2

2.5

3

5.6

9.1

10.9

15.5
Clear

Allowable Angular Misalignment(deg)
1

3

4

7

10

12

20

30

40

45

90
Clear

Narrow search by specifying Brand

- MISUMI (2)
- Cost Efficient Products ()
- MIYOSHI KIKAI (33)
- GANTER (9)
- NORELEM (9)
- MIGHTY (5)
- SUNGIL (4)
- REYHER (1)
- MIKI PULLEY (1)
- SHOWA SPRING (1)
- SAKAI MANUFACTURING (1)
Clear