IGUS Cable Carriers（Page 3）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
System E3 - 3-piece E-chains®, E3.15 Series
IGUS
E3 combines small pitch, smooth running, low noise, stability, easy assembly and low cost. The spring connector element replaces the pin and bore and avoids relative movement between the joints. This means virtually no wear or abrasion (cleanroom). To reduce production and assembly costs, the spring connector is on a segment of ten e-chain® links.
[Features]
- For high speeds and accelerations
- For extremely fast opening and closing
- Low noise 38dB(A) - low noise and low vibration due small pitch
- Cleanroom ISO Class 1 - virtually no wear or abrasionMin. Shipping Days ： 6 Days -
E6.1 E-chains®, E61.29 Series
IGUS
The E6.1 series is a development of the E6 series. It incorporates all the advantages of the E6 such as strength, cleanroom-compatibility and low weight in addition to even quieter operation at higher maximum speeds. In addition, its accessibility to the interior and the assembly and handling have been improved.
[Features]
- Low-noise - from a noise level of 32dB(A)1)
- Weight savings approx. 30% compared to the System E6
- Highly dynamic
- Extremely low vibration
- Cleanroom-compatible due to principle of low-abrasion for connectors, without pin/bore connection
- Virtually no polygon effect, smooth rolling operation
- Smooth interior design for a long lifetime for cables and hoses
- Crossbars removable along the inner and outer radius
- Option without camber (NC) simply by turning the inner linkMin. Shipping Days ： 6 Days -
E6.1 E-chains®, E61.52 Series
IGUS
The E6.1 series is a development of the E6 series. It incorporates all the advantages of the E6 such as strength, cleanroom-compatibility and low weight in addition to even quieter operation at higher maximum speeds. In addition, its accessibility to the interior and the assembly and handling have been improved.
[Features]
- Low-noise - from a noise level of 32dB(A)1)
- Weight savings approx. 30% compared to the System E6
- Highly dynamic
- Extremely low vibration
- Cleanroom-compatible due to principle of low-abrasion for connectors, without pin/bore connection
- Virtually no polygon effect, smooth rolling operation
- Smooth interior design for a long lifetime for cables and hoses
- Crossbars removable along the inner and outer radius
- Option without camber (NC) simply by turning the inner linkMin. Shipping Days ： 6 Days -
E6.1 E-chains®, E61.62 Series
IGUS
The E6.1 series is a development of the E6 series. It incorporates all the advantages of the E6 such as strength, cleanroom-compatibility and low weight in addition to even quieter operation at higher maximum speeds. In addition, its accessibility to the interior and the assembly and handling have been improved.
[Features]
- Low-noise - from a noise level of 32dB(A)1)
- Weight savings approx. 30% compared to the System E6
- Highly dynamic
- Extremely low vibration
- Cleanroom-compatible due to principle of low-abrasion for connectors, without pin/bore connection
- Virtually no polygon effect, smooth rolling operation
- Smooth interior design for a long lifetime for cables and hoses
- Crossbars removable along the inner and outer radius
- Option without camber (NC) simply by turning the inner linkMin. Shipping Days ： 6 Days -
Autoglide Version 03 - Easy Filling, EA16 Series
IGUS
Long travels are always demanding for an e-chain system®. For much of the travel, the e-chain® must run on the lower run or on glide bars. In addition the e-chain system® needs guides, in order to prevent sideways movement. In most cases this is ensured by using a guide trough. However, there are also applications where a guide trough is not desirable for space reasons, whether this is due to visual or spatial requirements. In order to meet this need, igus® developed the autoglide system in 1995. autoglide is a self-aligning e-chain®, which can dispense with guide troughs for up to 80m travel.
[Features]
- Travels up to 80m and travel speeds up to 2.5m/s
- Cost-effective solution, guide troughs not required
- Very fast installation for long travel distances, no guide troughs needed!
- Small width, quiet operationMin. Shipping Days ： 6 Days -
Autoglide Version 03 - Easy Filling, EA25 Series
IGUS
Long travels are always demanding for an e-chain system®. For much of the travel, the e-chain® must run on the lower run or on glide bars. In addition the e-chain system® needs guides, in order to prevent sideways movement. In most cases this is ensured by using a guide trough. However, there are also applications where a guide trough is not desirable for space reasons, whether this is due to visual or spatial requirements. In order to meet this need, igus® developed the autoglide system in 1995. autoglide is a self-aligning e-chain®, which can dispense with guide troughs for up to 80m travel.
[Features]
- Travels up to 80m and travel speeds up to 2.5m/s
- Cost-effective solution, guide troughs not required
- Very fast installation for long travel distances, no guide troughs needed!
- Small width, quiet operationMin. Shipping Days ： 6 Days -
E2/000 Film Hinge E-chain, With "iFlip" Hinge, EF2-21 Series
IGUS
Series EF2-21 with "iFlip" hinges, the injection molded igus® hinges made of reinforced plastic. Since the same reinforced material is used throughout, this new E2 series is very strong, and due to the one-piece construction, also very inexpensive.
[Features]
- Fast opening and closing
- One-piece design saves assembly time
- Inexpensive, light and strong
- Detente on the crossbars for side mounted applicationsMin. Shipping Days ： 6 Days -
E2 Mini - One-Piece E-chains®, F17 Series
IGUS
E2 mini are small one- or two-piece e-chains®, recommended for highly dynamic applications. igus® also offers a range of accessories and fixation options. Upgrades to openable versions are available for many types. Different types are interchangeable and can also serve as replacements.
[Features]
- If a small, but extremely strong e-chain® is required
- Quiet operation due to small pitch
- For highly dynamic applications
- Variety of options - E2 mini as non-openable or openable along the inner or outer radiusMin. Shipping Days ： 6 Days -
Zipper E-tubes, R07 Series
IGUS
igus® "zipper" e-chains® and e-tubes deliver in terms of practicality and performance. The "zipper" function makes them a very useful product to reduce assembly time. The small pitch, the tough-elastic zipper-band, and the sturdy link work well in high acceleration applications. The "zipper" series is one of the most popular igus® e-chain® series for demanding applications.
[Features]
- zipper-like design for quick opening and closing of lids
- zipper e-chains® can be lengthened and shortened at any point
- Small pitch for low noise, smooth running
- High accelerations: 100 m/s2 and moreMin. Shipping Days ： 6 Days -
R2.1 E-tubes, R2.26 Series
IGUS
Cost-effective, strong e-tubes with 26, 40, 48 and 75mm inner height. Openable and removable lids along inner or outer radius, openable from both sides. Very sealed design and strong double stop-dogs for high fill weights and unsupported lengths.
[Features]
-
- Large inner height and therefore cost effective
- Cables are protected from swarf
- Easy to fill, lids openable along the inner or outer radius, from both sides
- Low noise operation due to integrated brake
- Notch separator, recommended for sidemounted applicationsMin. Shipping Days ： 6 Days -
R2.1 E-tubes, R2.75 Series
IGUS
Cost-effective, strong e-tubes with 26, 40, 48 and 75mm inner height. Openable and removable lids along inner or outer radius, openable from both sides. Very sealed design and strong double stop-dogs for high fill weights and unsupported lengths.
[Features]
-
- Large inner height and therefore cost effective
- Cables are protected from swarf
- Easy to fill, lids openable along the inner or outer radius, from both sides
- Low noise operation due to integrated brake
- Notch separator, recommended for sidemounted applicationsMin. Shipping Days ： 6 Days -
Easy chain® - version "Z", Z065.3 Series
IGUS
Cost-effective, easy to fill e-chains® are available in two versions. In the "E" version the cable is simply installed from the outside, and in the "Z" version from the inside. The primaryreason to choose easy chains® is to save time when fitting cables. The material, igumid NB, presents more application opportunities due to its flexibility, UL94-V2 classification and excellent cleanroom qualities. The onepiece design keeps the easy chain® very cost effective.
[Features]
- Easy filling without opening and closing the lids
- If quiet running is required
- If a light and cost-effective e-chain® is required
- For high accelerationsMin. Shipping Days ： 6 Days -
Easy chain® - version "Z", Z26 Series
IGUS
Cost-effective, easy to fill e-chains® are available in two versions. In the "E" version the cable is simply installed from the outside, and in the "Z" version from the inside. The primaryreason to choose easy chains® is to save time when fitting cables. The material, igumid NB, presents more application opportunities due to its flexibility, UL94-V2 classification and excellent cleanroom qualities. The onepiece design keeps the easy chain® very cost effective.
[Features]
- Easy filling without opening and closing the lids
- If quiet running is required
- If a light and cost-effective e-chain® is required
- For high accelerationsMin. Shipping Days ： 6 Days -
Office e-chain®, ZF14 Series
IGUS
Cables fitted quickly, e-chain® attached quickly, attractive design, nice and tidy. This e-chain® was designed and developed especially for the furniture industry.
[Features]
- Aesthetic design
- Closed outer contours (half-tube)
- Mounting brackets easy to clip on
- Easy to fill, even when installed with "easy" design
- Cable-friendly due to smooth interior
- UL94-V2 certified
- Mounting brackets can be either screwed or bonded thanks to the large flat surface on the bottomMin. Shipping Days ： 6 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Cover Type |
| Properties |
| Height of Inside H1(mm) |
| Number of Internal carrier divisions |
| Width of Inside W1(mm) |
| Bending radius R(mm) |
| Maximum Cable Outer Diameter Dp(mm) |
| Operating Speed(m/s) |
| Pitch P(mm) |
| Cable Insert Surface |
| Cable Insert Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS |
| Product Series | E2/000 Film Hinge E-chain, With "iFlip" Hinge, EF2-21 Series | |||||||||||||
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cover Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Properties | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height of Inside H1(mm) | - | - | 52 | - | 32 | 25.2 | - | - | 10.3 | 26 | 75 | 11.3 | - | 21 |
| Number of Internal carrier divisions | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width of Inside W1(mm) | - | - | 40 ～ 300 | - | 48 | 50 | - | - | 10 ～ 50 | 50 | 111 ～ 200 | 9 | - | 38 |
| Bending radius R(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Cable Outer Diameter Dp(mm) | - | - | 46 | - | 28.5 | 22.5 | - | - | 8 | 23 | 60 | 7 | - | 18 |
| Operating Speed(m/s) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch P(mm) | - | - | 30 | - | 30.5 | 25 | - | - | 20 | 35 | 60 | 15 | - | 30.5 |
| Cable Insert Surface | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cable Insert Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type
-
Rectangular
-
Modular Square
-
Related Components
-
Rectangular
-
Cover Type
-
Standard
-
Full Cover
-
One Side Cover
-
Standard
-
Properties
-
Height of Inside H1(mm)
-
Number of Internal carrier divisions
-
N/A
-
Width 2 separate
-
Width 3 separate
-
2-Directions, Vertical
- 3-Directions, Vertical
-
N/A
-
Width of Inside W1(mm)
- 5
- 6
- 7
- 9
- 10
- 13
- 14
- 15
- 15.5
- 16
- 18
- 19.5
- 20
- 22
- 23
- 24
- 25
- 29
- 30
- 35
- 36
- 38
- 40
- 42
- 44
- 48
- 50
- 52
- 57
- 58
- 60
- 62
- 62.5
- 63
- 64
- 65
- 68
- 70
- 74
- 75
- 77
- 80
- 85
- 87
- 87.5
- 89
- 90
- 96
- 97
- 100
- 103
- 108
- 110
- 111
- 112
- 115
- 120
- 125
- 130
- 137
- 140
- 150
- 162
- 163
- 168
- 169
- 175
- 182
- 187
- 200
- 207
- 212
- 225
- 237
- 250
- 262
- 275
- 287
- 300
- 312
- 325
- 337
- 350
- 362
- 375
- 387
- 400
- 412
- 425
- 437
- 450
- 462
- 475
- 487
- 500
- 512
- 525
- 537
- 550
- 600
-
Bending radius R(mm)
-
Maximum Cable Outer Diameter Dp(mm)
-
Operating Speed(m/s)
-
Pitch P(mm)
-
Cable Insert Surface
-
Cable Insert Type
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Cable Carriers
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.