IMAO CORPORATION Clamping Levers（Knob Material：Phenol）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 98.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tension Lever (TLF-N, TL-N)
IMAO CORPORATION
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all parts are made from stainless steel, so it is robust and strong- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 37.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Tension Lever (FTF, FT)
IMAO CORPORATION
In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
[Features]
· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
· If interference of the lever occurs during operation, a short lever can be installed and used- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 36.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Control Lever (CL)
IMAO CORPORATION
By using the optional CLB, you can also use the snap method with this lever handle.
[Features]
· The boss hole can be easily covered with the center plate accessory after installation.
· Optional ball & spring can be installed, and snap method can be used.
· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.
· For grip, PG type is used- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 33.58 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Switch Lever (WL)
IMAO CORPORATION
[Features]
· Standard type lever handle that can be used widely.
· For grip, PG type is used- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 18.86 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Safe Tension Lever (STF-N, ST-N)
IMAO CORPORATION
Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all is made from stainless steel, so it is robust and strong.
· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handling- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 40.54 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
| |
| Brand | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION |
| Product Series | ||||||
| CAD |
|
|
|
|
|
|
| Starting from∗ | 98.96 € *Unit price with basic configuration | 37.24 € *Unit price with basic configuration Volume Discount | 36.04 € *Unit price with basic configuration Volume Discount | 33.58 € *Unit price with basic configuration Volume Discount | 18.86 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 40.54 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 8 Days | Same day | 8 Days |
| Application | Clamp | Clamp | Clamp | Operation | Operation | Clamp |
| Type Clamp | Clamp Mechanism / Cam Mechanism | Clamp Mechanism | Clamp Mechanism | - | - | Clamp Mechanism |
| Type operation | - | - | - | N/A | N/A | - |
| Operation Direction | Vertical | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal |
| Shape | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob |
| L-Shaped Clamp Lever Shape | - | - | - | - | - | - |
| Lever Shape with Knob | Grip Ball | Grip Ball | Grip Ball | Single lever | Single lever | Grip Ball |
| Mounting Section Type | Round Hole | Male thread / Female Thread | Male thread / Female Thread | Round Hole | Round Hole | Male thread / Female Thread |
| Rotating Radius R(mm) | 104 ～ 146 | 88 ～ 128.5 | 102 ～ 148 | 108 ～ 127 | 80 ～ 180 | 87 ～ 128 |
| Main Body Material | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Polyamide | Steel | Steel |
| Main Body Surface Treatment | Black Oxide | N/A / Powder Coating | N/A / Black Oxide | N/A | Black Oxide | Powder Coating |
| Mounting Section Material | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Steel |
| Mounting Section Surface Treatment | Black Oxide | N/A / Black Oxide | N/A / Black Oxide | Black Oxide | Black Oxide | Black Oxide |
| Knob Material | Phenol | Phenol | Phenol | Phenol | Phenol | Phenol |
| Surface Treatment of knob | N/A | N/A | N/A | N/A | N/A | N/A |
| Adjustment screw for gap | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | 8 ～ 12 | M10 ～ M20 | M8 ～ M16 | 8 ～ 10 | 8 ～ 16 | 10 ～ 16 |
| Mounting Section Length L(mm) | - | 30 ～ 80 | 30 ～ 60 | - | - | 30 ～ 60 |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 80.3
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (3)
- KONISHI MFG (7)
- IMAO CORPORATION (6)
- NABEYA BI-TECH (6)
- GANTER (0)
- NORELEM (0)
- ESCO (0)
- EUROFLEX (0)
- ELESA (0)
- KIPP (0)
- HALDER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.