KANAFLEX CORPORATION Conduit（Properties：Heat Resistance）

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Duct Hose Duct N.S.D.

KANAFLEX CORPORATION

The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.

[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.

Min. Shipping Days ： 10 Days
Duct Pipe Hose - Rigid Duct N.S.

KANAFLEX CORPORATION

[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.

Min. Shipping Days ： 56 Days

Min. Shipping Days ：	10 Days

Min. Shipping Days ：	56 Days


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Material
Cutting Service Usage
Properties
I.D. d(mm)
O.D. D(mm)
Color
Applicable Fluid
Max. Allowable Pressure (below Ambient Temperature)(MPa)


Brand	KANAFLEX CORPORATION	KANAFLEX CORPORATION
Product Series	Duct Hose Duct N.S.D.	Duct Pipe Hose - Rigid Duct N.S.
Starting from^∗	-	-
Min. Shipping Days ：	10 Days	56 Days
Material	Elastomer	Olefinic Resin
Cutting Service Usage	Yes	Yes
Properties	Heat Resistance	Heat Resistance
I.D. d(mm)	38.1 ～ 125.9	65 ～ 90
O.D. D(mm)	44.5 ～ 137	71.8 ～ 96.8
Color	Gray	Gray
Applicable Fluid	Air	Air
Max. Allowable Pressure (below Ambient Temperature)(MPa)	0.02 ～ 0.06	-

Filter by:

Narrow search by specifying spec./dim.

Material
- Aluminum
- Special Coating Glass
- Stainless Steel
- Polypropylene
- PVC
- Olefinic Resin
- EPDM
- Elastomer
- Steel
- Others
- Polyurethane
Clear

Cutting Service Usage
- Yes
- No
Clear

Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Oil Resistance
- Flame Resistance
- Low Temp. Resistance
- Heat Resistance
- Low Particle Generation
- Flexibility
- Others
Clear

I.D. d(mm)
10

16.7

19.5

25

25.4

25.5

31.8

32

32.4

32.5

35

37.3

37.5

38

38.1

38.5±0.5

39

41

42.7

50

50.5±1.0

50.6

50.8

50.9

51

52.5

53.0

53.5

62.4

63

63.5

64

64.5±1.0

65

65.5

66

66.2

67

67.5

68.0

70

71.0

75

75.5

75.9

76

76.2

76.4

76.5

78.0

79

83

88.9

89

89.8

90

91

91.5

92

97.0

98

100

100.3

101.0

101.3

101.4

101.5

101.6

101.7

102

102.2

102.5

103

104

105

109.0

113

114.3

123.0

125

125.9

126

126.5

127

127.3

127.5

128

130

131.4

145.0

150

151.4

151.7

152

152.4

152.5

152.6

155

165

175

176.5

176.6

177.8

180

200

202

203.2

203.6

203.7

204.1

205

208

227.0

228.6

230

250

252

252.1

253

253.0±2.0

253.5

254

257

278

282

300

302

303

303.5

307

357

359.0

400

408

410.0

500

512.0
Drawing

Clear

O.D. D(mm)
21.2

24

28

30

31.4

32.0

32.4

37

38

38.6

39.2

39.5

39.8

40.0

41.5

42.0

42.6

42.9

44.5

44.5±1.0

45.0

45.4

45.8

45.9

46

46.2

46.8

53.8

54.3

54.5

55.0

55.3

56

56.4

56.6

57.5

57.6

57.9

58.0

58.5

59.0

59.8

59.8±1.5

59.9

60.2

61.0

61.2

61.8

69

69.5

70

70.3

70.5

71

71.2

71.5

71.6

71.8

72

72.6

73.0

73.2

73.2±1.5

74.7

79

79.5

80

80.3

80.5

81

81.5

81.8

82

82.4

82.5

83.8

84.5

84.6

85

85.2

85.8

85.9

86.4

86.8

87

87.2

87.6

94

94.5

95

95.5

96

96.8

97.4

97.7

98.2

98.6

99.0

99.3

99.5

100

100.3

101.4

105

105.3

105.5

106

107

107.3

107.4

108

109

110

110.5

110.8

111.4

111.5

112

112.2

113.0

114.6

118.0

119.3

125.3

125.9

129.5

130

130.3

130.5

131

131.5

132

133.7

134.5

135.0

137

137.2

137.3

137.5

137.6

137.7

138

138.2

138.5

138.7

139.3

139.7

140.2

155

155.5

155.7

157

158

159

160

162

163.8

164

164.8

165.5

166.0

166.2

167

168.8

177.8

180

180.7

182.8

187.8

190.6

191.0

192.4

205

205.7

208

211.0

211.5

215

216.0

216.5

216.8

217.1

217.2

217.5

220

223

230

240.4

243.1

255

255.9

256

259.5

261.0

263.9

263.9±2.5

265.7

266.2

268.5

271

274.2

280

292.6

305.9

306.5

307

308

309.6

311

316.0

316.4

318

320.0

322

328.2

332

357

378.5

407

418.0

431.0

458

520.0

532.0
Drawing

Clear

Color
- Black
- White
- Gray
- Transparent
- Ivory
- Dark Brown
- Red
- Metal Color
Clear

Applicable Fluid
- Machining Oil
- Lubricant
- Chemical
- Powder
- Grains
- Air
- Paper Scraps
- Sparks
- Oil Mist
Clear

Max. Allowable Pressure (below Ambient Temperature)(MPa)
0.0005

0.001

0.002

0.003

0.004

0.005

0.006

0.007

0.0072

0.008

0.009

0.01

0.011

0.013

0.014

0.015

0.018

0.02

0.025

0.027

0.029

0.03

0.032

0.04

0.05

0.051

0.056

0.06

0.07

0.08

0.1
Clear

Narrow search by specifying Brand

- MISUMI (1)
- Cost Efficient Products ()
- TIGERS POLYMER (8)
- TOTAKU INDUSTRIES (6)
- KANAFLEX CORPORATION (2)
- ORIENT CORPORATION (2)
- OHTSUKA (1)
- COSMOTEC (0)
- SHINSUNG (0)
- KURIMOTO (0)
- KURARAYPLASTICS (0)
Clear