MANYO TOOLS Tooling（Product Category：Attachments/Accessories）
Search by sub-category
Shrink Fit Holders
Milling Chucks
Milling Cutter Arbors
Collet Holders
Drill Chucks
Collets
Tooling-Related Equipment
Presetters
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
ST-FM Straight Shank Face Mill Arbor
MANYO TOOLS
[Features]
-Please use it with a milling chuck.
-Supports various workpieces with a variety of types.Starting from∗ ： 157.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
ST-SCA Straight Shank Side Cutter Arbor
MANYO TOOLS
Please use it with a cutter chuck.
Supports various workpieces with a wide variety of types.Starting from∗ ： 264.85 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST-MRT Straight Shank Tap Collet Chuck
MANYO TOOLS
Tapping holder for NC lathes and composite machines. It can also be used in machining centers. Float mechanism absorbs pitch errors in forward and reverse rotationStarting from∗ ： 467.26 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MRC Small Diameter Collet
MANYO TOOLS
[Features]
-Compatible with MRC collet holder.
-Type (details): Small diameter collet
-Minimum order quantity: 1 pc.- Volume Discount
Starting from∗ ： 96.06 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
TS Test Bar
MANYO TOOLS
[Features]
· On taper shank φ50 ± 0.005 run-out within 0.002. φ50 ± 0.005 roundness within 0.002, cylindricity within 0.002.
· L dimension (from gauge line to test bar edge) ±0.005.Starting from∗ ： 1,121.71 € Min. Shipping Days ： 16 Days *Unit price with basic configuration
-
Pull Wrench
MANYO TOOLS
[Features]
· Easy and certain pull bolt removal and refitting.
· Wrench does not slip when tightening and removing pull bolts, enabling reliable attachment and detachment.
· Does not fall off even when the wrench is released.
· The tip does not distort thanks to the heat treatment.Starting from∗ ： 116.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 204.69 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
FMP Plunger Extension
MANYO TOOLS
[Features]
· Exerts its strength when the arbor is not quite long enough during deep engraving for moldsStarting from∗ ： 228.10 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
FMP Plunger Conversion Adapter
MANYO TOOLS
[Features]
-For high feeds.
-Cutter conversion mandrel for reciprocating feed.
-It is effective when the length of the mandrel is a little short in processing deep cutting of moulds.
[Detail Type]
-FMP plunge conversion adapter.Starting from∗ ： 229.35 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
HMA Chamfer End Mill Cutter
MANYO TOOLS
[Features]
A chamfering cutter that is compatible with centre through holes and has a replaceable head for easy tool management.Starting from∗ ： 173.22 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
HMA Chamfering End Mill Cutter (Chip)
MANYO TOOLS
[Features]
Inserts for chamfering end mills for HMA8, HMA10 and HMA16.Starting from∗ ： 135.41 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
HMA-ST Cylindrical Shank Head Master Arbor
MANYO TOOLS
[Features]
· Exponentially improves the efficiency of molds and parts processing.
· Head exchangeable type that makes tool management easy.
· Supports center-through oil holes.Starting from∗ ： 160.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
HMA-SCA Metal Saw Clamp Bolt
MANYO TOOLS
[Features]
· Dedicated tightening bolts support various thicknesses of metal saws.
· Dedicated thin bolts decrease interference with the tip to increase machining efficiency.Starting from∗ ： 163.45 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MC Straight Collet
MANYO TOOLS
[Features]
Compatible with MMC millmax milling chuck.
-Minimum order quantity: 1 piece.- Volume Discount
Starting from∗ ： 68.49 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MC-MT Tapered Sleeve
MANYO TOOLS
[Features]
Compatible with MMC millmax milling chuck.
-Minimum order quantity: 1 piece.
-Outer diameter (mm): 20/32/42Starting from∗ ： 105.64 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MMC Wrench
MANYO TOOLS
[Features]
Compatible with MMC millmax milling chucks.
[Product type]
Compatible chuck: MMC20
Compatible chuck: MMC25
Compatible chuck: MMC32
Compatible chuck: MMC42.- Volume Discount
Starting from∗ ： 36.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Back-Up Screw with Coolant Seal Pad
MANYO TOOLS
This is a threaded part for coolant adjustment.
Comes with a coolant seal pad.- Volume Discount
Starting from∗ ： 56.86 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Backup Screw
MANYO TOOLS
[Features]
-Coolant type adjustment threaded parts
-Type (details): Backup screw
-H (mm): 25- Volume Discount
Starting from∗ ： 38.00 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Backup Screw for High Pressure Applications
MANYO TOOLS
[Features]
-Coolant adjustment threaded parts
-Type (details): High pressure support screw
-H (mm): 10- Volume Discount
Starting from∗ ： 87.35 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MRC Adjustment Screw with Coolant Seal
MANYO TOOLS
[Features]
-Compatible with MRC collet holder
-Minimum order quantity: 1 pc.
[Detail Type]
Screw- Volume Discount
Starting from∗ ： 52.52 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MRC Wrench
MANYO TOOLS
[Features]
-Compatible with MRC collet holder
-Minimum order quantity: 1 pc.
[Detail Type]
Wrench.- Volume Discount
Starting from∗ ： 56.49 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Starting from∗ ： 91.71 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MRC Tap Collet
MANYO TOOLS
[Features]
· Collet inner diameter has a square hole for resistance to tap slippage.
· Dedicated collet is ideal for high accuracy tapping.Starting from∗ ： 121.86 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Wrench for Small-Diameter Collet Chuck
MANYO TOOLS
[Features]
Compatible with MRC collet holder.
-Tap with square hole inside diameter of collet which is resistant to tap slippage.
The special collet. Suitable for high precision tapping.
[Minimum order quantity]
-E8M: 2 pieces.
-E8MS, E11M, E11MS: 1 piece.- Volume Discount
Starting from∗ ： 91.71 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST-MRC F Straight Shank Collet Chuck
MANYO TOOLS
A holder for a lathe or combined processing machine. Ideal for high accuracy drilling and reamingStarting from∗ ： 183.72 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST-MRC Straight Shank Collet Chuck
MANYO TOOLS
To be used with milling chucks and collet chucks. Longitudinal adjustment can be performed freely.Starting from∗ ： 193.87 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Center through Coolant Nut (Single Piece)
MANYO TOOLS
[Features]
· Use the replacement nut and sealing disc for reliable center-through operationStarting from∗ ： 147.22 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MTC Collet
MANYO TOOLS
[Features]
-Usable with MTC ultra-long, slim collet holders.
-Standard drills can be used for deep hole drilling, allowing cost reduction.
-Excellent runout of 5 µm or less.
-Easy attachment and removal of blades without requiring expensive special equipment.
Simple structure improves workability.
-End mill types are suitable for mould finishing.Starting from∗ ： 97.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
MTC Extra-Long Slim Collet Chuck Holder
MANYO TOOLS
A shell diameter slim chuck specification, with consideration for interference. Costs can be reduced since standard drills can be used for drilling deep holes. Excellent runout accuracy of 5 μm or less. Easy blade attachment/detachment without the need for any expensive dedicated equipment. Simple structure that improves the workabilityStarting from∗ ： 160.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST-S Straight Shank Shrink-Fit Holder
MANYO TOOLS
[Features]
· The grip strength is 3 times that of the collet chuck.
· Thin with little interference.
· A well balanced type. Ideal for high speed machining.
· Excellent runout accuracy 3D tips of 3 μm or less.
· Length can be adjusted freely.Starting from∗ ： 203.44 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST Extension Side Lock Holder
MANYO TOOLS
[Features]
· A product lineup consisting of the ST20, T32, ST42, and ST50.8- Volume Discount
Starting from∗ ： 138.10 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Long Pull Bolt
MANYO TOOLS
[Features]
Compatible with MTB morse taper holder B-type.
Compatible with a wide range of cutters.
Please attach the drawing screw type morse taper cutting tool.
-Minimum order quantity: 1 pc.Starting from∗ ： 129.98 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
QCH Wrench
MANYO TOOLS
[Features]
Compatible with QCH quick change holder
-Minimum order quantity: 1pc.- Volume Discount
Starting from∗ ： 40.91 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST-S Straight Shank Shrink-Fit Holder
MANYO TOOLS
[Features]
· The grip strength is 3 times that of the collet chuck.
· Thin with little interference.
· A well balanced type. Ideal for high speed machining.
· Excellent runout accuracy 3D tips of 3 μm or less.
· Length can be adjusted freely.Starting from∗ ： 264.85 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS |
| Product Series | ||||||||||||||||||||||||||||||||||
| Starting from∗ | 157.12 € *Unit price with basic configuration | 264.85 € *Unit price with basic configuration | 467.26 € *Unit price with basic configuration | 96.06 € *Unit price with basic configuration Volume Discount | 1,121.71 € *Unit price with basic configuration | 116.39 € *Unit price with basic configuration | 204.69 € *Unit price with basic configuration | 228.10 € *Unit price with basic configuration | 229.35 € *Unit price with basic configuration | 173.22 € *Unit price with basic configuration | 135.41 € *Unit price with basic configuration | 160.61 € *Unit price with basic configuration | 163.45 € *Unit price with basic configuration | 68.49 € *Unit price with basic configuration Volume Discount | 105.64 € *Unit price with basic configuration | 36.55 € *Unit price with basic configuration Volume Discount | 56.86 € *Unit price with basic configuration Volume Discount | 38.00 € *Unit price with basic configuration Volume Discount | 87.35 € *Unit price with basic configuration Volume Discount | 52.52 € *Unit price with basic configuration Volume Discount | 56.49 € *Unit price with basic configuration Volume Discount | 91.71 € *Unit price with basic configuration Volume Discount | 121.86 € *Unit price with basic configuration | 91.71 € *Unit price with basic configuration Volume Discount | 183.72 € *Unit price with basic configuration | 193.87 € *Unit price with basic configuration | 147.22 € *Unit price with basic configuration | 97.61 € *Unit price with basic configuration | 160.61 € *Unit price with basic configuration | 203.44 € *Unit price with basic configuration | 138.10 € *Unit price with basic configuration Volume Discount | 129.98 € *Unit price with basic configuration | 40.91 € *Unit price with basic configuration Volume Discount | 264.85 € *Unit price with basic configuration |
| Min. Shipping Days ： | 8 Days | 10 Days | 10 Days | 10 Days | 16 Days | 6 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 6 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 8 Days | 10 Days | 10 Days |
| Product Category | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Spindle types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | Facemill | - | - | - | - | - | - | - | - | - | - | End Mill | - | - | - | - | - | - | - | - | - | - | - | - | Drill / Reamer | - | - | - | End Mill / Drill / Reamer | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Shrink fit | - | - | - | Shrink fit |
| Holder Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Category
- Main Body
- Attachments/Accessories
- Heating and Cooling Equipment
- Measuring equipment
-
Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
- NC Lathe
-
Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
-
HSK type
-
Tool Type
- End Mill
- Drill
- Reamer
- Facemill
- Tap
- Boring
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25 to 6
- 0.25～ 6
- 0.3~3
- 0.3～8
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.5 to 0.6
- 0.50 to 0.75
- 0.5 to 0.75
- 0.5～3.175
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7
- 0.5～7.0
- 0.5 to 8
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.5～16.0
- 0.55 ～0.65
- 0.6–0.8
- 0.65 ～0.75
- 0.7～6.0
- 0.7～6
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.8 to 1
- 0.85 ～0.95
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.25
- 1.00～1.25
- 1 to 1.5
- 1.0~6.0
- 1–7
- 1.0～8.0
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5～1.0
- 1.50～1.75
- 1.5～1.75
- 1.5~2
- 1.5 to 10
- 1.5 ～10
- 1.5～20.0
- 1.55 ～1.65
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.75～10.0
- 1.75～10
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.00～2.25
- 2.0～2.25
- 2~2.5
- 2–8
- 2.0～10.0
- 2.05 ～2.15
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.50～2.75
- 2.5～2.75
- 2.5–3.0
- 2.5–3
- 2.5–4
- 2.5～12
- 2.5 to 13
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 to 20
- 2.5 ～20
- 2.5～20.0
- 2.5～20
- 2.55 ～2.65
- 2.65 ～2.75
- 2.675～3.175
- 2.7～3.175
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.75～13.0
- 2.75～16.0
- 2.75～16
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- 3.0～2.5
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3.0〜 3.5
- 3–4
- 3–6
- 3.0–6.0
- 3～ 6
- 3～ 8
- 3–10
- 3.0～10.0
- 3 to 12
- 3.0～12.5
- 3.0～13.0
- 3 to 16
- 3.0～16.0
- M3～M16
- 3.0~20.0
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5
- 3.5～3.0
- 3.50～3.75
- 3.5～4.0
- 3.5〜 4.0
- 3.5~16
- 3.5～20.0
- 3.5～22
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4.0〜 4.5
- 4–5
- 4–6
- 4 to 12
- 4.0~20.0
- 4–20
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.50～4.75
- 4.5–5.0
- 4.5〜 5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5.0〜 5.5
- 5–6
- 5.0～25.0
- 5.0～32.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.50～5.75
- 5.5 to 6.0
- 5.5–6.0
- 5.5〜 6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- 6.0～5.0
- 6 to 6.5
- 6.0–6.5
- 6.0〜 6.5
- 6–7
- 6–8
- 6.0～25.0
- 6.05～6.15
- 6.15～6.25
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5 to 7.0
- 6.5〜 7
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～7.5
- 7～7.5
- 7–8
- 7.0〜 8.0
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5
- 7.5～8.0
- 7.5～25.4
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8.0〜 9.0
- 8–10
- 8～25.4
- 8.4～8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.0〜10.0
- 9.4～9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10.0〜11.0
- 10–12
- 10–16
- 10–20
- 10.4~10.5
- 10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.0〜12.0
- 11–13
- 11.4～11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.0〜13.0
- 12.4~12.5
- 12.5～13.0
- 12.9～13.0
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5～15.0
- 14.9～15.0
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16～25
- 16.0～25.4
- 16.0～32.0
- 16.4～16.5
- 16.5
- 16.5～17.0
- 16.9～17.0
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5～18.0
- 17.9～18.0
- 18
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5～19.0
- 18.9～19.0
- 19
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 21
- 21.0～20.0
- 22
- 22.0～21.0
- 23
- 23.0～22.0
- 24
- 24.0～23.0
- 25
- 25.0～24.0
- 28.0～27.0
- 30
- 30.0～29.0
- 32
- 32.0～31.0
- M36
- 38
- 39
- 40
- 42
- 50
- 50.8
- 75
- 80
- 100
- 125
- 150
- 160
- 200
- 200～
-
Chuck Type
- Straight collet
- Shrink fit
- Side lock
-
Holder Length L(mm)
- 15
- 15.5
- 16
- 16.5
- 19.5
- 20
- 24.5
- 25
- 26.5
- 29
- 29.5
- 30
- 33
- 34
- 35
- 35.6
- 37
- 38.3
- 38.5
- 40
- 43
- 44
- 44.1
- 44.8
- 45
- 47
- 48
- 50
- 52
- 53
- 54
- 54.4
- 54.6
- 55
- 55.5
- 55.5～62.5
- 57
- 60
- 60.8
- 62
- 62.5
- 63
- 64.6
- 65
- 66
- 67
- 67.5
- 68.5
- 68.6
- 70
- 71
- 73.6
- 74
- 75
- 76.5
- 76.5～83.5
- 76.7
- 77
- 79
- 79.5～91.5
- 80
- 80.6
- 81
- 81.5
- 82
- 84
- 84.5
- 85
- 85.5
- 87.5～94.5
- 90
- 90.5
- 91
- 93
- 94.5
- 95
- 95/135/165
- 96
- 97
- 97.1～108.1
- 97.5
- 98
- 100
- 100/140/170
- 101.6
- 102.1～113.1
- 105
- 105.5
- 107
- 107.5
- 109
- 110
- 111.5
- 112
- 113
- 115
- 115.5～122.5
- 120
- 120/160/190
- 121
- 122
- 123
- 125
- 125/175/205
- 127
- 129.5
- 130
- 131.5
- 132
- 135
- 137
- 137.1～148.1
- 137.5
- 140
- 142
- 143
- 145
- 148
- 148.5
- 149.5
- 150
- 153
- 155
- 156
- 160
- 160.5～167.5
- 162.5
- 163
- 164.5
- 165
- 167
- 167.5
- 169
- 170
- 173
- 174.0
- 175
- 175.5～182.5
- 176.5
- 180
- 180.5
- 181
- 182.1～193.1
- 182.5
- 185
- 186.5
- 187
- 190
- 192
- 193.5
- 195
- 200
- 202.5
- 210
- 218
- 220
- 225
- 226.0
- 240
- 250
- 255
- 275
- 283
- 285
- 300
- 350
- 375
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Center Through (Blade Through)
- Gap Through
Narrow search by specifying Brand
-
- BIG KAISER (62)
- MANYO TOOLS (34)
- TRUSCO NAKAYAMA (19)
- MST CORPORATION (18)
- NIKKEN KOSAKUSHO (17)
- YUKIWA SEIKO (17)
- TAKURA KOGU (16)
- KATO MFG (13)
- SHOWA TOOL (9)
- MITUTOYO (6)
- NT TOOL (5)
- THE CUT (5)
- SANDVIK (3)
- EARTH MAN (2)
- NEW STRONG (2)
- ALBRECHT (1)
- GIGA SELECTION (1)
- BLUEBIRD (1)
- FUJI TOOL (1)
- NOGAJAPAN (1)
- NIIGATA SEIKI (1)
- NAKANISHI (1)
- SKC (1)
- SHINWA RULES (1)
- VERTEX (1)
- SK 11 (0)
- TOHIN SHOJI (0)
- NABEYA (0)
- NIKKI (0)
- KASAHARA (0)
- FUSO SEIKI (0)
- OSG (0)
- AMF (0)
- ESCO (0)
- NORELEM (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Tooling
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.