MISUMI Square HSS End Mills（Coating：TiCN）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

Non-Coated

2 Flutes

R (Regular)
Min. Shipping Days ： 13 Days

Min. Shipping Days ：	13 Days

TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Starting from^∗ ：	31.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
R (Regular)

Starting from^∗ ：	41.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

MISUMI

[Features]
-High-speed steel powder roughing type with long flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
L (Long)

Starting from^∗ ：	57.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

MISUMI

[Features]
-Long shank of high-speed steel powder expected to last a long time
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
3 Flutes
S (Short)

Starting from^∗ ：	54.64 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
-High-speed steel powder for roughing with short flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
S (Short)

Starting from^∗ ：	23.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
-High speed steel powder for roughing with regular flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
R (Regular)

Starting from^∗ ：	25.29 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
-High-speed steel powder roughing cutter with long flute length expected to last a long time
-Suitable for milling deep cavities
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
L (Long)

Starting from^∗ ：	17.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Starting from^∗ ：	18.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
-High speed steel powder grinding wheel with regular flute length and 4 flutes expected to last a long time
-Coating with excellent lubricity for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
R (Regular)

Starting from^∗ ：	18.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

[Features]
-High speed steel powder roughing cutter with long flute length and 4 flutes expected to last a long time
-Suitable for deep cavity milling
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
L (Long)

Starting from^∗ ：	18.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Corner C End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High-speed steel 2-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

Non-Coated

2 Flutes

S (Short)
Min. Shipping Days ： 13 Days
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated

2 Flutes

R (Regular)
Min. Shipping Days ： 13 Days
High-Speed Steel Corner C End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated

4 Flutes

S (Short)
Min. Shipping Days ： 13 Days
High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated

4 Flutes

R (Regular)
Min. Shipping Days ： 13 Days
High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High speed steel cutter with 2 flanks, which can be sized to customer requirements to avoid unwanted tool overlap.

Non-Coated

2 Flutes

S (Short)
Min. Shipping Days ： 13 Days
High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel reamer with 2 flats that can be made to measure to avoid unwanted tool interference

Non-Coated

2 Flutes

R (Regular)
Min. Shipping Days ： 13 Days
High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference

Non-Coated

4 Flutes

S (Short)
Min. Shipping Days ： 13 Days
High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 4 flanks that can be sized to customer requirements to avoid unwanted tooling interference.

Non-Coated

4 Flutes

R (Regular)
Min. Shipping Days ： 13 Days
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated

2 Flutes

S (Short)
Min. Shipping Days ： 13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days

Min. Shipping Days ：	13 Days


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank


Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	High-Speed Steel Corner C End Mill, 2-Flute / Short Model	High-Speed Steel Corner C End Mill, 2-Flute / Regular Model	High-Speed Steel Corner C End Mill, 4-Flute / Short Model	High-Speed Steel Corner C End Mill, 4-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
Starting from^∗	-	31.02 € *Unit price with basic configuration Volume Discount	41.08 € *Unit price with basic configuration Volume Discount	57.44 € *Unit price with basic configuration Volume Discount	54.64 € *Unit price with basic configuration Volume Discount	23.33 € *Unit price with basic configuration Volume Discount	25.29 € *Unit price with basic configuration Volume Discount	17.95 € *Unit price with basic configuration Volume Discount	18.82 € *Unit price with basic configuration Volume Discount	18.82 € *Unit price with basic configuration Volume Discount	18.82 € *Unit price with basic configuration Volume Discount	-	-	-	-	-	-	-	-	-
Min. Shipping Days ：	13 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	13 Days	13 Days	13 Days	13 Days	13 Days	13 Days	13 Days	13 Days	13 Days
Specifications	Non-Coated 2 Flutes R (Regular)	TiCN 4 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	TiCN 3 Flutes S (Short)	TiCN 2 Flutes S (Short)	TiCN 2 Flutes R (Regular)	TiCN 2 Flutes L (Long)	TiCN 4 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)
Blade diameter (D)(φ)	2.7 ～ 24.99	6 ～ 32	6 ～ 30	10 ～ 30	6 ～ 30	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	2.7 ～ 25
Blade length (ℓ)(mm)	10 ～ 60	13 ～ 53	19 ～ 68	45 ～ 90	11 ～ 45	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	8 ～ 50	10 ～ 60	8 ～ 45	12 ～ 68	-	-	-	-	8 ～ 50
work material	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Blade shape type	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	2	3 ～ 6	3 ～ 5	4 ～ 5	3 ～ 4	2	2	2	4	4	4	2	2	4	4	2	2	4	4	2
Tool Material Type	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking
Shank diameter (d)(mm)	6 ～ 25	6 ～ 32	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	6 ～ 25
Coating	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN
Overall Length (L)(mm)	50 ～ 130	57 ～ 133	63 ～ 144	95 ～ 166	80 ～ 160	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	50 ～ 120	50 ～ 130	52 ～ 121	55 ～ 144	60 ～ 120	60 ～ 130	69 ～ 121	78 ～ 144	50 ～ 120
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-3.99/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

24

25

26

27

28

30

32

33

34

35

36

38

39

40

45

48

50

53

55

56

58

60

63

65

67

68

70

75

80

85

90

95

100

105

106

110

112

115

120

122

125

130

140

145

150

160

180

200

212

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- Roughing
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14

16

18
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 86
  - 88
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 102
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 123
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 133
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 141
  - 142
  - 143
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 166
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 177
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 197
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 214
  - 215
- 220～227
  - 220
  - 222
  - 224
  - 225
  - 227
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 252
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 310～315
  - 310
  - 315
- 320
- 340～345
  - 340
  - 345
- 350
- 370
- 390～395
  - 390
  - 395
- 400
- 420
Drawing

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Other
Clear

Base Blade Y/N
- Available
- None
Clear

Underneck length (ℓ1)(mm)
10

12

14

17

22

23

27

28

29

37

38

40

44

45

46

48

49

50

53

54

56

58

60

62

64

65

66

70

72

75

80

88

90

95

100

112

113

115
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Brand

- MISUMI (20)
- Cost Efficient Products ()
- SANKO MFG (20)
- NACHI(FUJIKOSHI) (11)
- FUKUDA (0)
- ESCO (0)
- DAIICHITOOL (0)
- OSG (0)
- TAIYO-TOOL (0)
- ASAHI TOOLS (0)
- EIKOSHA (0)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

MISUMI Square HSS End Mills（Coating：TiCN）

Search by sub-category

Filter by:

Narrow search by specifying spec./dim.

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

work material

Blade shape type

Number of flutes(sheet)

Tool Material Type

Machining Application

Shank diameter (d)(mm)

Coating

Overall Length (L)(mm)

Torsion Angle (θ)

Base Blade Y/N

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Brand

Narrow search by specifying CAD data type

Categories related to Square HSS End Mills

Método de pago

Fabricación bajo demanda

Cambiar de vista

Certificados

MISUMI en todo el mundo

Redes sociales

Nota Legal