MISUMI Chamfering / Centering Tools（Application：Chamfering/Horizontal）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

TS coated carbide chamfer, V grooving end mill, 2-flute

MISUMI

[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

Volume Discount

TS
General Steel
2 Flutes

Starting from^∗ ：	71.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

MISUMI

The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

Volume Discount

TS
SUS
2 Flutes

Starting from^∗ ：	74.67 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

MISUMI

[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	41.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

MISUMI

Ideal for the Deep Chamfering of Workpieces

Volume Discount

TS
General Steel
2 Flutes

Starting from^∗ ：	48.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 2-flute / 15° spiral

MISUMI

[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Starting from^∗ ：	42.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 2-flute / short model

MISUMI

[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Starting from^∗ ：	38.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 3-flute / short model

MISUMI

[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Starting from^∗ ：	46.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

MISUMI

Capable of everything from positioning to chamfering in a single shot

Volume Discount

Non-Coated
Aluminum
2 Flutes

Starting from^∗ ：	40.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

MISUMI

The sharp helix blade achieves the clean machined surface with less burr

Volume Discount

Non-Coated
Aluminum
2 Flutes

Starting from^∗ ：	72.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

MISUMI

The chamfer angle can be selected from 60, 90 and 120°according to the machining style

Volume Discount

TiCN
2 Flutes
S (Short)

Starting from^∗ ：	57.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Chamfering End Mill, 2-Flute / Short

MISUMI

Chamfering end mill with the angle that can be freely selected in 1° increments

Non-Coated

2 Flutes

S (Short)
Min. Shipping Days ： 7 Days

Min. Shipping Days ：	7 Days

XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

MISUMI

[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	37.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

MISUMI

[Features]
・Machining from positioning to chamfering with a single tool.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	42.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill 2-Flute

MISUMI

[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	32.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

MISUMI

[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	43.97 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

MISUMI

[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	42.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Specifications
Application
Tip angle (θ)
Tool Diameter (D)(mm)
work material
Single blade, two blades
Peripheral Blade Y/N
Tool Material Type
Coating Y/N
Coating Type
R Size (R)(mm)


Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	TS coated carbide chamfer, V grooving end mill, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide chamfering end mill, 3-flute / short model	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	High-Speed Steel Chamfering End Mill, 2-Flute / Short	XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	XAL Series Carbide Chamfer End Mill 2-Flute	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
CAD			2D / 3D									2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	71.59 € *Unit price with basic configuration Volume Discount	74.67 € *Unit price with basic configuration Volume Discount	41.90 € *Unit price with basic configuration Volume Discount	48.89 € *Unit price with basic configuration Volume Discount	42.10 € *Unit price with basic configuration Volume Discount	38.81 € *Unit price with basic configuration Volume Discount	46.59 € *Unit price with basic configuration Volume Discount	40.79 € *Unit price with basic configuration Volume Discount	72.54 € *Unit price with basic configuration Volume Discount	57.90 € *Unit price with basic configuration Volume Discount	-	37.62 € *Unit price with basic configuration Volume Discount	42.61 € *Unit price with basic configuration Volume Discount	32.62 € *Unit price with basic configuration Volume Discount	43.97 € *Unit price with basic configuration Volume Discount	42.86 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Specifications	TS General Steel 2 Flutes	TS SUS 2 Flutes		TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes	TiCN 2 Flutes S (Short)	Non-Coated 2 Flutes S (Short)
Application	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal
Tip angle (θ)	60 ～ 120	90	-	90	90	60 ～ 120	90	90	90	60 ～ 120	60 ～ 160	-	-	-	-	-
Tool Diameter (D)(mm)	3 ～ 16	3 ～ 12	-	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	10 ～ 25	10 ～ 25	-	-	-	-	-
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	N/A	N/A	Available	Available	N/A	Available	Available	N/A	N/A	Available	Available	Available	N/A	N/A	Available	N/A
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	Available	Available / N/A	Available	Available	Available	Available	Available
Coating Type	TS	TS	AlCrN	TS	TS	TS	TS	-	-	-	TiCN	AlCrN	AlCrN	AlCrN	AlCrN	TS
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Engraved
- Drilling
- Other
Images

Clear

Tip angle (θ)
0–90

5～85

5～85°

15

20

25

30

35

40

45

45°

50

55

60

60°

60 × 120

65

65°

70

75

75°

80

90

90°

Center Hole Angle: 90°

118

120

120°

125°

130

135

145+90
[60-160/1]
Drawing

Clear

Tool Diameter (D)(mm)
0 to 2

0.03

0.04

0.05

0.06

0.07

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.16

0.17

0.18

0.19

0.2

0.21

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.3, 0.6

0.35

0.4

0.45

0.45～2.1

0.45～2.7

0.5

0.5, 1

0.55

0.6

0.65

0.65～2.1

0.65～2.7

0.7

0.75

0.8

0.85

0.9

0.95

1

1, 2

1–6

1.1

1.2

1.25

1.3

1.4

1.5

1.6

1.6～3.35

1.7

1.8

1.9

2.

2

2–10

2～13

2.1

2.2

2.3

2.4

2.5

2.5～5.3

2.6

2.7

2.8

2.9

3

3~14

3 to 15

3.1

3.15

3.17

3.2

3.3

3.4

3.5

3.6

3.8

4

4.2

4.3

4.4

4.5

4.6

4.8

5

5.1

5.2

5.3

5.4

5.5

5.6

5.8

6

6.2

6.3

6.3,8.3,10.4,12.4,16.5,20.5

6.30/8.30/10.40/12.40/16.50/20.50

6.3/8.3/10.4/12.4/16.5/20.5

6.35

6.4

6.5

6.6

6.8

7

7.2

7.3

7.4

7.5

7.6

7.7

7.8

7.92

8

8.2

8.3

8.4

8.5

8.8

9

9.1

9.4

9.5

9.52

9.53

10

10.1

10.2

10.3

10.4

10.5

10.8

11

11.1

11.2

11.4

11.5

11.88

12

12.1

12.3

12.4

12.5

12.7

13

13.4

13.5

14

14.2

14.4

14.5

14.6

14.8

15

15.1

15.2

15.4

15.5

15.6

15.87

15.88

16

16.15

16.3

16.5

17

17.1

17.7

18

18.2

18.5

18.6

19

19.05

19.5

20

20.5

21

21.77

22

22.3

22.5

23

23.4

23.5

24

24.5

25

25.0(+0.3)

Max: 25, Min: 4.2

25.20

25.3

25.4

26

26.5

26.6

27

27.5

28

28.5

29

29.9

30

Max: 30, Min: 4

30.20

30.5

31

Max: 31, Min: 10

31.5

31.7

31.9

32

32.6

32.7

33.1

33.3

34

34.1

34.8

34.9

35

35.4

35.9

36

36.9

37

37.1

37.9

38

39

39.83

40

Max: 41, Min: 20

42

43

45

45.6

46

47

48

49

49.85～134.6

50

50.7

51

52

52.8

53

53.6

53.91

54

54.3

55

56

56.8

57.0

57.9

58

58.2

60

61.4

62

62.2

63

64

64.6

65

66

67.4

67.94

69.2

69.8

70

71.8

72

73.3

74

75

76

80

90

95

100
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- N/A
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
Details

Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TS
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- AlCrN
- ALT
- Other
Details

Clear

R Size (R)(mm)
0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

R0.5

0.5/1/1.5/2

0.5 to 4

0.5~5

0.55

0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1RM

1RY

R1

1, 1.5

1/2/3/4

1–3

1–5

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

1.8

1.85

1.9

1.95

2

2RM

2RY

R2

2, 3

2.05

2.1

2.15

2.2

2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.6

2.7

2.75

2.8

2.9

3

3RM

3RY

R3

3.25

3.5

R3.5

3.75

4

4RM

4RY

R4

4.25

4.5

R4.5

4.75

5

5RM

R5

5–10

5.25

5.5

5.75

6

R6

6.25

6.5

6.75

7

R7

7.25

7.5

7.75

8

R8

8.25

8.5

8.75

9

R9

9.5

10

R10

10.5

11

11.5

12

R12

12.5

R12.5

13

13.5

14

14.5

15

R15

15.5

16

R16

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

XRM

XRY
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (16)
- Cost Efficient Products ()
- FUJIGEN (45)
- IWATA TOOL (29)
- MAKOTOLOY (18)
- OSG (12)
- EIKOSHA (11)
- BIG KAISER (7)
- THE CUT (6)
- NOGAJAPAN (5)
- YAMAWA MFG (5)
- DIJET (3)
- DIXI (3)
- KYOWA SEIKO (3)
- SANKO MFG (3)
- TRUSCO NAKAYAMA (3)
- ASAHI TOOLS (2)
- NS TOOL (2)
- OKAZAKI SEIKO (2)
- SANDVIK (2)
- 7 LEADERS (1)
- DAIICHITOOL (1)
- FUKUDA (1)
- NINE9 (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- PREVOST (0)
- MAPAL (0)
- NIKKEN KOSAKUSHO (0)
- RYOKO SEIKI (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- GUHRING (0)
- ESCO (0)
- NT TOOL (0)
- WERA (0)
- WATERMILLS (0)
- METABO (0)
- ALPEN (0)
- ILIX (0)
- REX TOOLS (0)
- WOLFCRAFT (0)
- TAIYO-TOOL (0)
- ATOM (0)
- NAKAJIMAKOUKI (0)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Categories related to Chamfering / Centering Tools

- Centering/Countersink
- Chamfer, V-Grooves

MISUMI Chamfering / Centering Tools（Application：Chamfering/Horizontal）

Search by sub-category

TS coated carbide chamfer, V grooving end mill, 2-flute

TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

TS coated carbide chamfering end mill, 2-flute / 15° spiral

TS coated carbide chamfering end mill, 2-flute / short model

TS coated carbide chamfering end mill, 3-flute / short model

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

High-Speed Steel Chamfering End Mill, 2-Flute / Short

XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

XAL Series Carbide Chamfer End Mill 2-Flute

XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

Filter by:

Narrow search by specifying spec./dim.

Application

Tip angle (θ)

Tool Diameter (D)(mm)

work material

Single blade, two blades

Peripheral Blade Y/N

Tool Material Type

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Brand

Narrow search by specifying CAD data type

Categories related to Chamfering / Centering Tools

Método de pago

Fabricación bajo demanda

Cambiar de vista

Certificados

MISUMI en todo el mundo

Redes sociales

Nota Legal