MITUTOYO Data Measurement Equipment（Page 7）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Disc for Stylus
MITUTOYO
Applications that incorporate the inspection of grooves, undercut sections in bores and similar, are often not accessible with other styli configurations. These task can be best executed with disk styli.Starting from∗ ： 121.97 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Digital Indicator, Signal ID-C
MITUTOYO
This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.
Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54) Measures MAX/MIN/RANGE (run-out value).
Saves three different Preset and Tolerance settings.
Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE) Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment functionStarting from∗ ： 871.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator, Peak Hold ID-C, Inch/Metric
MITUTOYO
This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits:
The MAX/MIN/RANGE (run-out value) can be measured. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. Analogue bar graph in the display (12 different scales switchable). GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.Starting from∗ ： 499.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-S
MITUTOYO
This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
Large character height of 9 mm provides good readability.Exceptional battery life.Starting from∗ ： 187.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator, Calculation ID-C, Inch/Metric
MITUTOYO
This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1. The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement). Coefficients A,B and C are freely definable. X = displacement of the plunger. Analogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement function. MAX/MIN/RANGE function to measure peak values. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. A USB interface box can be used to set up the indicator from PC via dedicated softwareStarting from∗ ： 612.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator, Calculation ID-C
MITUTOYO
This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1. The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement). Coefficients A,B and C are freely definable. X = displacement of the plunger. Analogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement function. MAX/MIN/RANGE function to measure peak values. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. A USB interface box can be used to set up the indicator from PC via dedicated softwareStarting from∗ ： 629.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator Signal ID-C, Inch/Metric
MITUTOYO
This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output. Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54). Measures MAX/MIN/RANGE (run-out value). Saves three different Preset and Tolerance settings. Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE). Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment functionStarting from∗ ： 784.00 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Digital Indicator ID-S, IP53
MITUTOYO
This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
Large character height of 9 mm provides good readability.Exceptional battery life.Starting from∗ ： 401.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-S, ANSI/AGD, IP53
MITUTOYO
This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
Large character height of 9 mm provides good readability.Exceptional battery life.Starting from∗ ： 181.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-S, ANSI/AGD
MITUTOYO
This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
Large character height of 9 mm provides good readability.Exceptional battery life.Starting from∗ ： 181.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-N, IP66
MITUTOYO
A Mitutoyo slim-style dustproof and waterproof digital indicator suitable for use in the presence of coolant or cutting oil. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes switchable resolution, tolerance judgement, data hold and readout rotation. SPC data output.Starting from∗ ： 278.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-H, BS AC-Adapter
MITUTOYO
This is a superior multi-function indicator that gives you high accuracy and high resolution of 0.0005 mm. The Digimatic Indicator ID-H offers you the following benefits:
2-colour LCD backlight (green and red) provides you with visual GO/±NG tolerance judgement and analogue bar-graph display.
You can display the maximum, minimum or range (runout value) . Lifting mechanism over 30 mm with cable release (optional). You can carry out zero-setting and presetting with the optional remote controller, without having to touch the indicator. The remote control system can be implemented in advance with the built-in RS-232 interface and a PC. External power supply via AC-Adapter.Starting from∗ ： 910.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-F, ASME/ANSI/AGD
MITUTOYO
This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital stepStarting from∗ ： 818.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-F
MITUTOYO
This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital stepStarting from∗ ： 818.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-C, Inch/Metric
MITUTOYO
This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.Starting from∗ ： 333.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-C, ASME/ANSI Type
MITUTOYO
This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.Starting from∗ ： 329.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-C
MITUTOYO
This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.Starting from∗ ： 333.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-B, IP66
MITUTOYO
This is a back-plunger model that is highly resilient and robust. The ABSOLUTE Digimatic Indicator ID-B offers you the following features:
It is a back plunger type, with the display viewed from above.
Its slim body design is ideal for multi-point measurements. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. It has excellent resistance against water and dust (IP66 protection level) allowing you to use it in machining situations that include splashing coolant fluid. You can perform GO/±NG judgement.Starting from∗ ： 312.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Switch Box
MITUTOYO
This switch box is a distribution box that connects 3-5 Digimatic tools to one channel interface (for example a DMX-1 USB).Starting from∗ ： 324.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Extension Cable
MITUTOYO
These extension cables allow you to extend Digimatic data cables up to 14 m, extending the working distance between a measuring instrument and an external device such as a PC or DP-1VA Logger/Printer.Starting from∗ ： 331.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Data Logger
MITUTOYO
The Digimatic DL-1000 and 1000 M are data loggers designed for storing measurement data recorded by a Digimatic measuring instrument for subsequent output to a computer. They allow you to collect data when away from a PC, and transfer it later. These Digimatic Data Loggers offer the following benefits:
The measuring device is connected to the I/O port of the DL-1000/1000 M with a data cable, and you can transmit data either using the data button on the measuring device or on the DL-1000/1000 M.For data transfer the devices are connected via an interface to the target computer. Data transfer from the DL-1000/1000 M is executed with the data button or footswitch of an interface or upon request from the respective software. The DL-1000/1000 M is recognised by the measurement device as a Digimatic measurement instrument.You can output data directly to a printer equipped with a Digimatic interface.Starting from∗ ： 731.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable, Straight, Data Button
MITUTOYO
ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
DIGIMATIC Workshop Caliper (Series 552)
ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
DIGIMATIC Height Gauge (Series 192, 570)
ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
Portable Hardness Tester (Series 811)
ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Micrometer Head (Series 164)Starting from∗ ： 48.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 79.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable, Round 6-Pin Type
MITUTOYO
ABSOLUTE DIGIMATIC Quick Micrometer (Series 227, 293)
DIGIMATIC Micrometers (Series 293, 314, 317, 323, 324, 326, 331, 340, 342, 343, 369, 389, 395, 406, 422)
DIGIMATIC Micrometer Heads (Series 164, 350)
DIGIMATIC Standard Micrometer (Series 121)
DIGIMATIC Depth Micrometer (Series 329)
DIGIMATIC Inside Micrometer with jaws (Series 345)
DIGIMATIC Inside Micrometer (Series 337, 339)
ABSOLUTE DIGIMATIC Borematic (Series 568)
Height Micrometer Heightmaster (Series 515)
Hardness Tester Wizhard (Series 810)
Hardness Tester Micro Vickers HM/HV (Series 810)Starting from∗ ： 60.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable, Flat Straight Type
MITUTOYO
ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
DIGIMATIC Workshop Caliper (Series 552)
ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
DIGIMATIC Height Gauge (Series 192, 570)
ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
Portable Hardness Tester (Series 811)
ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Micrometer Head (Series 164)Starting from∗ ： 37.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable, Flat L-Shape Type
MITUTOYO
ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
DIGIMATIC Workshop Caliper (Series 552)
ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
DIGIMATIC Height Gauge (Series 192, 570)
ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
Portable Hardness Tester (Series 811)
ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Micrometer Head (Series 164)Starting from∗ ： 40.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digital Indicator ID-B, IP66, ANSI/AGD
MITUTOYO
A Mitutoyo dustproof, waterproof, back-plunger type digital indicator suitable for use in the presence of coolant or cutting oil. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes switchable resolution, tolerance judgement, data hold and readout rotation. SPC data output.Starting from∗ ： 312.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable, Flat L-Shape Right Type
MITUTOYO
ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
DIGIMATIC Workshop Caliper (Series 552)
ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
DIGIMATIC Height Gauge (Series 192, 570)
ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
Portable Hardness Tester (Series 811)
ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
ABSOLUTE DIGIMATIC Micrometer Head (Series 164)Starting from∗ ： 40.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable, Flat 10-Pin Type
MITUTOYO
ABSOLUTE DIGIMATIC Indicator ID-F/ID-H (Series 543)
Portable Surface Roughness Tester SJ-210/301/401/402 (Series 178)
Profile Projector PJ-Series (Series 303)
Profile Projector PH-Series (Series 172)
Height Micrometer CERA Heightmaster (Series 515)
Linear Height and Height Gauge QM-Series (Series 518)
Linear Gauge Counter (Series 542)
LSM-6000 Counter for Laser Scan Micrometer (Series 544)
Laser Scan Micrometer LSM-9506DIGIMATIC Multi-unit (Series 572)
MVK-H Hardness Tester (Series 810)
DIGIMATIC Port for Linear-Scale CounterStarting from∗ ： 57.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable with Data Button IP Type
MITUTOYO
IP65/66/67 ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
IP65/66/67 ABSOLUTE DIGIMATIC Caliper (Series 500, 550, 551, 573)
IP65/66/67 ABSOLUTE DIGIMATIC Scale (Series 572)
IP65/66/67 ABSOLUTE DIGIMATIC Depth Gauge (Series 571)Starting from∗ ： 100.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable with Data Button
MITUTOYO
This is an overview of available data cables, and how you can connect measuring devices with data output e.g.to a PC. The cables listed are used to connect the measuring devices directly via USB (USB Input Tool Direct Cables) , indirectly via standard Digimatic cables and interface box (e.g. DMX box or USB Input Tool Box) , or the U-WAVE-T wireless transmitters (box version) to a PC.Starting from∗ ： 95.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Digimatic Cable for External Preset/Zero
MITUTOYO
ABSOLUTE DIGIMATIC Indicator ID-N/ID-B (Series 543) with zero-setting terminalStarting from∗ ： 191.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cylinder Stylus M3 Stainless Steel
MITUTOYO
Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded.Starting from∗ ： 26.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cylinder Stylus M2 Stainless Steel
MITUTOYO
Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded.Starting from∗ ： 25.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cylinder Stylus M2 Ruby
MITUTOYO
Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Straight styli are used to detect easily reachable features on the measured surface. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.Starting from∗ ： 186.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cylinder Stylus M2 Carbide
MITUTOYO
Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed.Starting from∗ ： 94.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cylinder Pin Insert
MITUTOYO
Cylinder pin receiver insert for receiving parts in bores. Base shaft Ø 8.0 mmStarting from∗ ： 22.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cubical Stylus Holder M5, Titanium
MITUTOYO
Multiway stylus holders enable the flexible configuration of star styli.Starting from∗ ： 77.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cubical stylus Holder M5, Aluminium
MITUTOYO
Multiway stylus holders enable the flexible configuration of star styli.Starting from∗ ： 102.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 17.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connection Unit, U-WAVE Fit
MITUTOYO
This compact and wireless units is used to connect U-WAVE to a measuring tool with the Digimatic output feature.Starting from∗ ： 105.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 13.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Clamping Rail
MITUTOYO
eco-fix rail.
Flexible positioning rail system using eco-fix and eco-fixplus components.
T-slot implied for additional fixturing options.
Quick change of the base dimension according to workpiece size by moving the corner connectors.
Fast repositioning with the attachable base plates.
Build an angle from the rails to easily reposition a base plate.Starting from∗ ： 48.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Centering Insert
MITUTOYO
Centering insert to accommodate e.g.rotationally symmetrical test parts without center hole.Starting from∗ ： 28.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 38.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 121.97 € *Unit price with basic configuration | 871.00 € *Unit price with basic configuration | 499.00 € *Unit price with basic configuration | 187.00 € *Unit price with basic configuration | 612.00 € *Unit price with basic configuration | 629.00 € *Unit price with basic configuration | 784.00 € *Unit price with basic configuration | 401.00 € *Unit price with basic configuration | 181.00 € *Unit price with basic configuration | 181.00 € *Unit price with basic configuration | 278.00 € *Unit price with basic configuration | 910.00 € *Unit price with basic configuration | 818.00 € *Unit price with basic configuration | 818.00 € *Unit price with basic configuration | 333.00 € *Unit price with basic configuration | 329.00 € *Unit price with basic configuration | 333.00 € *Unit price with basic configuration | 312.00 € *Unit price with basic configuration | 324.00 € *Unit price with basic configuration | 331.25 € *Unit price with basic configuration | 731.84 € *Unit price with basic configuration | 48.00 € *Unit price with basic configuration | 79.00 € *Unit price with basic configuration | 60.00 € *Unit price with basic configuration | 37.00 € *Unit price with basic configuration | 40.00 € *Unit price with basic configuration | 312.00 € *Unit price with basic configuration | 40.00 € *Unit price with basic configuration | 57.00 € *Unit price with basic configuration | 100.00 € *Unit price with basic configuration | 95.00 € *Unit price with basic configuration | 191.00 € *Unit price with basic configuration | 26.32 € *Unit price with basic configuration | 25.00 € *Unit price with basic configuration | 186.84 € *Unit price with basic configuration | 94.74 € *Unit price with basic configuration | 22.37 € *Unit price with basic configuration | 77.63 € *Unit price with basic configuration | 102.63 € *Unit price with basic configuration | 17.76 € *Unit price with basic configuration | 105.00 € *Unit price with basic configuration | 13.16 € *Unit price with basic configuration | 48.55 € *Unit price with basic configuration | 28.95 € *Unit price with basic configuration | 38.16 € *Unit price with basic configuration |
| Min. Shipping Days ： | 60 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 60 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Product Type | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Switch | Connection Cable | Data equipment related goods | Connection Cable | Connection Cable | Connection Cable | Connection Cable | Connection Cable | Data equipment related goods | Connection Cable | Connection Cable | Connection Cable | Connection Cable | Connection Cable | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods | Data equipment related goods |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
Narrow search by specifying Brand
-
- MAHR (368)
- MITUTOYO (331)
- NORELEM (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Data Measurement Equipment
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.