NABEYA Jigs for Manual Tightening（Page 2）

?* Information on days to ship and prices

• 

  Mini Low Height Clamp

  NABEYA

  With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

  Starting from∗ ：	198.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Rubber Cap 6893

  NABEYA

  Dedicated clamping screw for toggle clamps.

  Starting from∗ ：	6.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Aluminum Screw Jack

  NABEYA

  Made of aluminum so doesn't scratch the base, clamps, etc. Convenient for use as a support jack for plastic clamp sets.

  Starting from∗ ：	52.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamp Part of Wedge Clamp (for Tapped Holes)

  NABEYA

  The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

  Starting from∗ ：	125.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Side Clamp Jack

  NABEYA

  It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment

  Starting from∗ ：	150.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Side Jack B Type

  NABEYA

  [Features]
  · Simply insert into the T-groove.
  · Useful for receiving cutting resistance from the side.
  · The tap hole opening is horizontal to the table. With stopper bolt.

  Starting from∗ ：	89.39 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Side Jack F Type

  NABEYA

  [Features]
  · Simply insert into the T-groove.
  · Useful for receiving cutting resistance from the side.
  · Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step part

  Starting from∗ ：	371.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element 7110FT

  NABEYA

  S45C / quenched base unit low type (for T slot).

  Starting from∗ ：	339.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Double Swing Clamp Set S Type

  NABEYA

  This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

  Starting from∗ ：	107.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6803

  NABEYA

  [Features]
  · SS400 and galvanized toggle down clamp 6803.
  · 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

  Starting from∗ ：	99.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6848V

  NABEYA

  6848VNI is made of stainless steel. The hook length can be adjusted.

  Starting from∗ ：	108.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hold Clamp, Clamp

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Starting from∗ ：	284.99 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6842PL

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Starting from∗ ：	188.63 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Quick Hold Down Clamp

  NABEYA

  Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).

  Starting from∗ ：	161.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PA Feed Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Starting from∗ ：	22.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Starting from∗ ：	53.81 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Oil Cup for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Starting from∗ ：	5.47 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Knob for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Starting from∗ ：	27.54 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Set (for Tapped Holes)

  NABEYA

  The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

  Starting from∗ ：	198.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Applicable Clamp Units 7110M

  NABEYA

  This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.

  Starting from∗ ：	781.21 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp B Type

  NABEYA

  It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

  Starting from∗ ：	355.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp A Type

  NABEYA

  [Features]
  · It can be horizontally swung to attach and remove workpieces.
  · Can be used for T-grooves and for tapped holes.
  · The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
  · Tool-less (with handle).
  · Free clamping direction (without guide groove).
  · The built-in spring causes it to automatically rise when unclamping.
  · Attachments can be mounted

  Starting from∗ ：	377.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp Joint S Type

  NABEYA

  This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types available

  Starting from∗ ：	21.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6802

  NABEYA

  Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.

  Starting from∗ ：	81.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6850 (Pneumatic Type)

  NABEYA

  Comes with a double-acting pneumatic cylinder.

  Starting from∗ ：	814.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6847S

  NABEYA

  The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.

  Starting from∗ ：	209.97 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Universal Clamp Main Body

  NABEYA

  [Features]
  · Parts for universal clamps.
  · It can steplessly fasten tall and short workpieces.

  Starting from∗ ：	77.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Attachment for Aluminum Jack

  NABEYA

  Attachment for A5056 aluminum jack.

  • Volume Discount

  Starting from∗ ：	23.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw for TCL / TCH

  NABEYA

  It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from parts

  Starting from∗ ：	33.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PA Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Starting from∗ ：	22.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  PA Spring for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Starting from∗ ：	32.79 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Side Jack A Type

  NABEYA

  Simply insert into the T-groove. Useful for receiving cutting resistance from the side.

  Starting from∗ ：	68.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp Set S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Starting from∗ ：	83.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Start Element ZA

  NABEYA

  It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

  Starting from∗ ：	719.07 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element 7110FB

  NABEYA

  It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

  Starting from∗ ：	246.31 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element 7110Z

  NABEYA

  EN 1.1191 Equiv. / hardened spacer element standard type.

  Starting from∗ ：	519.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toe Adjusting Clamp TCL Type

  NABEYA

  Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

  Starting from∗ ：	311.67 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6832

  NABEYA

  [Features]
  · SS400/galvanized toggle down clamp 6832.
  · 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	66.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6833

  NABEYA

  Hold down toggle clamp 6833 made of EN 1.0038 Equiv. and zinc plating.

  Starting from∗ ：	114.49 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6841

  NABEYA

  6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

  Starting from∗ ：	129.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6848H

  NABEYA

  6848HNI is made of stainless steel. The hook length can be adjusted.

  Starting from∗ ：	108.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Helical Clamp

  NABEYA

  Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.

  Starting from∗ ：	111.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Universal Clamp Semi-Cylindrical Sealing Washer

  NABEYA

  [Features]
  · Parts for universal clamps.
  · The swivel pad fits on the workpiece and clamping surface for vertical tightening.
  · Although this product is equipped with T-nuts, it can also be used with them removed

  Starting from∗ ：	17.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Low Edge Clamp (One Sided Type)

  NABEYA

  [Features]
  · It is a compact clamp that does not lift much.
  · Ideal for machining thin, low-profile objects.
  · There are three sizes of tightening bolts: M4, M6, and M12.
  · It has a compact size and large stroke of 0.3 to 1.1.
  · The guide groove of the main body shortens workpiece setup time (excluding LWC4).
  · It has a structure that prevents chips from entering inside.
  · Ideal for small workpieces.
  · Brass material is used to avoid scratching workpieces.
  · Lifting up of the workpiece is minimal.
  · Ideal for thin workpieces.

  Starting from∗ ：	21.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Attachment for Clamp Support Jack

  NABEYA

  [Features]
  · The one that fits the workpiece can be selected from the various types of attachments.
  · For N0.E-175 clamp support screw jack and N0.E-176 screw jack only.

  • Volume Discount

  Starting from∗ ：	20.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...